bouletmarc / bmburner Goto Github PK

burning 27SF512 get success. when i read it, it gets wrong values in different memory locations when comparing it with original bin file. every read access get different values when comparing it with previous read.

tried to assemble the burner can't get it to work. don't really know whats wrong. also can i ask is Q1 and Q2 emitter connected to ground ? i try the circuit and nothing happens when i try to blank check software says its not blank. but its a new chip. when i try to write software says write ok but when verify buffer not the same.

please help

thanks

I''m using the latest version of bmburner and I think I found a bug.

Selecting W27c512 and select erase chip. It does through the motions and says chip is erased but when I blank check the chip, its not black.

If however I run arduino and send 5ECS through the console then the chip is successfully blanked.

Are you able to reproduce this issue?

Great tool! Works fantastic when it connects, but having issues.
I've made this project both on a breadboard using a CH340G Nano, and spun my own v1.0 through OSHPark using an on-board 328p, booster circuit and FT231X. Both have issues connecting to the software, taking at least 4 cycles to connect, or never connecting.
I've messed with the latency a little to no avail. Does this happen normally with the software, or is there something I'm missing?

Downloaded driver and all still wont connect