MicroPython I2C LCD

MicroPython package to control HD44780 LCD displays 1602 and 2004 via I2C

General

MicroPython package to control HD44780 LCD displays 1602 and 2004 via I2C

📚 The latest documentation is available at MicroPython I2C LCD ReadTheDocs 📚

Installation
- Install required tools
Setup
- Install package with upip
- Manually
  - Upload files to board
Usage
Credits

Installation

Install required tools

Python3 must be installed on your system. Check the current Python version with the following command

python --version
python3 --version

Depending on which command Python 3.x.y (with x.y as some numbers) is returned, use that command to proceed.

python3 -m venv .venv
source .venv/bin/activate

pip install -r requirements.txt

Setup

Install package with upip

Connect the MicroPython device to a network (if possible)

import network
station = network.WLAN(network.STA_IF)
station.active(True)
station.connect('SSID', 'PASSWORD')
station.isconnected()

General

Install the latest package version of this lib on the MicroPython device

import mip
mip.install("github:brainelectronics/micropython-i2c-lcd")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
upip.install('micropython-i2c-lcd')

Specific version

Install a specific, fixed package version of this lib on the MicroPython device

import mip
# install a verions of a specific branch
mip.install("github:brainelectronics/micropython-i2c-lcd", version="feature/initial-implementation")
# install a tag version
mip.install("github:brainelectronics/micropython-i2c-lcd", version="0.1.0")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
upip.install('micropython-i2c-lcd==0.1.0')

Test version

Install a specific release candidate version uploaded to Test Python Package Index on every PR on the MicroPython device. If no specific version is set, the latest stable version will be used.

import mip
mip.install("github:brainelectronics/micropython-i2c-lcd", version="0.1.0-rc3.dev1")

For MicroPython versions below 1.19.1 use the upip package instead of mip

import upip
# overwrite index_urls to only take artifacts from test.pypi.org
upip.index_urls = ['https://test.pypi.org/pypi']
upip.install('micropython-i2c-lcd==0.1.0rc3.dev1')

Manually

Upload files to board

Copy the module to the MicroPython board and import them as shown below using Remote MicroPython shell

Open the remote shell with the following command. Additionally use -b 115200 in case no CP210x is used but a CH34x.

rshell --port /dev/tty.SLAB_USBtoUART --editor nano

Perform the following command inside the rshell to copy all files and folders to the device

mkdir /pyboard/lib
mkdir /pyboard/lib/lcd_i2c

cp lcd_i2c/* /pyboard/lib/lcd_i2c

cp examples/main.py /pyboard
cp examples/boot.py /pyboard

Usage

from lcd_i2c import LCD
from machine import I2C, Pin

# PCF8574 on 0x50
I2C_ADDR = 0x27     # DEC 39, HEX 0x27
NUM_ROWS = 2
NUM_COLS = 16

# define custom I2C interface, default is 'I2C(0)'
# check the docs of your device for further details and pin infos
i2c = I2C(0, scl=Pin(13), sda=Pin(12), freq=800000)
lcd = LCD(addr=I2C_ADDR, cols=NUM_COLS, rows=NUM_ROWS, i2c=i2c)

lcd.begin()
lcd.print("Hello World")

For further examples check the examples folder or the Example chapter in the docs.

Credits

Based on Frank de Brabanders Arduino LiquidCrystal I2C Library.

brainelectronics / micropython-i2c-lcd Goto Github PK