Hackintosh-Intel-i9-10900k-Gigabyte-Z490-Vision-D

Hello folks,

I have successfully installed MacOS Catalina 10.15.4 on my i9-10900k running on a Gigabyte Z490 Vision D.

You can find my EFI folder in this repository.

Current Bootloader: OpenCore 0.6.0

YouTube Video to this build

I also made a video on how I got macOS running on my build and how I build this rig: https://youtu.be/szOofRy7uBc

Hardware

Intel i9-10900k
Gigabyte Z490 Vision D:
- Audio: Realtek ALC1220-VB
- 1Gbit Ethernet: Intel I219-V
- 2.5Gbit Ethernet: Intel I225-V
- Two USB-C/Thunderbolt 3 ports
RAM: 64GB G.Skill Trident Z 3600Mhz CL18
GPU: ASRock Phantom Gaming AMD Radeon VII
Wifi/BT: MQUPIN fenvi T919 Wireless Card with BCM94360CD

Working

Not working so far

iGPU UHD630 HDMI-Output: You cannot use the iGPU to drive your display. So far it is only working for GPU-acceleration like Intel QuickSync technology. Your help is appreciated here :).

Benchmarks

OC: 5.2Ghz [email protected], no Power Limit

Geekbench

My Geekbench Profile: https://browser.geekbench.com/user/218488

Cinebench

Cinebench R20 (with OC): 6857 points.

You can see my "old" Threadripper 1950x with OC to 4.0Ghz All-Core above(7916 points). The stock 1950x below (6670 points).

Details

Installation notes

Create an MacOS Catalina 10.15.4 USB-Installer Stick. Do this on a real Mac.
- Go into the app store and search for Catalina. Download it. It should download to your Macs application folder.
- Plugin a plain vanilla USB-Stick with at least 16GB. My installation needed 8.24GB.
- Assuming your stick is called "Untitled".
- Open the terminal and enter this command to create the installer (Replace MyVolume with your USB-sticks name. In this case Untitled: sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume
- Now there should be a progress bar in the terminal showing the creation process in %. Wait until it is complete.
- At the end your USB-stick should be named "Install macOS Catalina".
Mount the EFI-partition of the "Install macOS Catalina" disk.
- I use Hackintool for this.
- Open Hackintool and go to the "Disks" menu. There you should see your disks.
- Press the double-arrow in the 6th column to mount the EFI-partition of your installer disk.
Delete all folders and then copy my EFI folder to the root of the EFI-partition
Go to EFI/OC and open the config.plist with a plist Editor (I use "PLIST Editor" from the app store)
Within the config.plist navigate to PlatformInfo/Generic and paste your serials for MLB, SystemSerialNumber and SystemUUID. You can generate them with the tool CloverConfigurator.
Change BIOS-Settings. See My BIOS-settings for reference.
Reboot from the installation media and install macOS. The installation needs Internet. So either install a supported WiFi-card or plugin Ethernet.
If you get an error within the installation saying something like "this installation is damaged" you can try this workaround: Delete Installinfo.plist on the installer disk:

Open the "Install macOS Catalina" Disk
Right Click on the package "Install macOS Catalina"
Click on "Package Contents"
Then navigate to Contents > SharedSupport
Delete the Installlnfo.plist

Fixing Sleep/Wake

In this section I wanna share with you, how I got my Sleep/Wake working properly.

I am using darkwake=8 as bootargument.

I have read that darkwake=8 should be obsolete since Mojave, but somehow this did the trick for me at the end. I tried other values as well: darkwake=0,2 and no darkwake. But only with darkwake=8 my PC keeps sleeping.

I also had to use SSDT-Disable-CNVW.aml to disable the m.2 slot where the onboard Intel Wifi 6 sits, because the CNVi device was constantly waking up my PC.

In addition, I set the following settings in Hackintool. You can edit them by clicking on the value, but it has a very small "clickable" area:

Energy Saver Settings

Bluetooth Settings

Proper USB-port configuration

I have created 3 alternative USB-port configurations for the Gigabyte Z490 Vision D. . Just set the SSDT-UIAC-xxx.aml to enabled for the one you want to use.

Alternative 1

Alternative 2

Alternative 3

If you want to use this EFI-folder for a different Z490 Board, you should create your own SSDT-UIAC.aml with Hackintool.

At the end of this configuration, Hackintool will generate a USBPorts.kext and a SSDT-UIAC.aml and SSDT-EC-USBX.dsl.

And then you should either use USBInjectAll.kext + SSDT-UIAC.aml + SSDT-EC-USBX.aml OR the USBPorts.kext only.

BTW: Most have different variations for the SSDT-EC-USBX.aml. I guess most of the time SSDT-EC.aml and SSDT-EC-DESKTOP.aml have the same purpose.

Before we start with the configuration you should use the USBInjectAll.kext without SSDT-UIAC.aml. The SSDT-EC-USBX.aml should stay at this time, your system might become unbootable without the SDT-EC-USBX.aml. But delete USBPorts.kext and SSDT-UIAC.aml.
Open Hackintool and go to the USB-section. Normally you see much more than 15 entries here and also the Connector-column contains wrong definitions.
Press the broom-icon to clear the USB-port section and then the refresh icon. Your USB-port section should look similar to this and is showing much more ports than the allowed number of 15 and a wrong connector definition:

Depending on what ports you have, you should have a USB2, a USB3 and a USBC device.
Now plug in the USB2 stick into all USB2/USB3 ports. Once connected the ports should be highlighted green in Hackintool. For all the green ones set the connector type to "USB2" first. Then plugin the USB3-stick into all USB2/USB3 ports. All ports, where you see your USB3-stick shown in the device column, should then be set to "USB3". So if you have a port that supports USB2 and USB3, you should set it to the higher standard, so "USB3". At last you plugin the USBC-stick into all the USBC-ports. Plug them in both ways. If your stick appears at the same port in both direction, set it to "TypeC+SW". If two different ports show the device when you plug in the stick in both directions in the same port, set both to "TypeC".
Now you need to limit the number of ports/entries to 15. Thunderbolt-ports (eg. "SSP1" or "SSP2") don't count into the 15 port limit. So now you need to decide for yourself, which of the ports you don't need so much. E.g. I have deleted the USB2-port that is labeled "BIOS" because I prefer to keep a faster USB3 port over a USB2 port.
When you are done, your Hackintool should look like this:

Now click the export button. This will generate a USBPorts.kext, a SSDT-EC-USBX.aml and a SSDT-UIAC.aml. Now you either a) Use only the USBPorts.kext (and delete USBInjectall.kext, SSDT-EC-USBX.aml and SSDT-UIAC.aml) Or b) Use USBInjectall.kext + SSDT-EC-USBX.aml + SSDT-UIAC.aml.

iGPU UHD630

I have managed to enable the iGPU UHD630 but I couldn't get the HDMI-output working. I think this is, because there is no iMac out yet with a 10th Gen Intel with UHD630 so there are no framebuffers implemented yet. But I am no expert in this iGPU because I don't really need it since I have a Radeon VII.

But the UHD630 is shown properly in MacOS and Hackintool:

When you want to use the iGPU (e.g. if you want SideCar to get an iPad working as wireless display), you need to change your SMBIOS to iMac19,1 and add the following device-properties in your config.plist.

To change the SMBIOS you have to change set your SystemProductNameto iMac19,1 (config.plist->PlatformInfo->Generic). You should also generate new serials when you change your SMBIOS.

And add the following the device-properties to your config.plist (config.plist->DeviceProperties):

<key>PciRoot(0x0)/Pci(0x2,0x0)</key>
	<dict>
		<key>AAPL,ig-platform-id</key>
		<data>BwCbPg==</data>
		<key>device-id</key>
		<data>kj4AAA==</data>
		<key>framebuffer-patch-enable</key>
		<data>AQAAAA==</data>
		<key>model</key>
		<string>Intel UHD Graphics 630 (Desktop)</string>
	</dict>

Audio

I needed this to get Audio working:

AppleALC.kext
FakeID.kext
FakePCIID_Intel_HDMI_Audio.kext
layout-id=7
device-id=0xA170

The layout-id and the device-id is injected via the device properties.

The audio device has the PCI-Address PciRoot(0x0)/Pci(0x1F,0x3).

<key>DeviceProperties</key>
	<dict>
		<key>Add</key>
		<dict>
			<key>PciRoot(0x0)/Pci(0x1F,0x3)</key>
			<dict>
				<key>device-id</key>
				<data>cKEAAA==</data>
				<key>layout-id</key>
				<data>BwAAAA==</data>
			</dict>
		</dict>
	</dict>

1Gbit Ethernet (Intel I219-V)

Simply add the newest IntelMausiEthernet.kext (mine is v2.5.1d1).

USB

I use USBInjectAll.kext and created my own SSDT-EC-USBX.aml and SSDT-UIAC.aml using Hackintool 3.4.0.

All ports are enabled, except for the USB 2.0 port that is labeled "BIOS" and intended to be used to flash the BIOS. I had to disable this to stay within the 15 port USB limit. And I don't need this port as much as the faster ones. BIOS flashing will work anyways, because this is done prior the Bootloader config.

Wifi/Bluetooth

You need natively supported Wifi and Bluetooth to use Airdrop, Unlock with Apple Watch etc.

Replacing the onboard Intel-Wifi6 card doesn't work because the m.2 slot is a CNVi slot. Which means that it only supports CNVi-cards which are made by Intel. I have tried that already, trust me. You can either Insert a PCI-Express card like the MQUPIN fenvi T919 or buy a special adapter (google for "NGFF to m.2 B+M-Key adapter") to get an Apple-support m.2 card working in one of the m.2 Slots that are meant to be used for m.2 SSDs. Then you also need an adapter cable to get USB-power onto the m.2 adapter to get Bluetooth working.

I used the MQUPIN fenvi T919 Wireless/Bluetooth Card. It has the natively supported WiFi and Bluetooth chip BCM94360CD.

No further kexts needed (no AirportBrcmFixup.kext, BrcmBluetoothInjector.kext, BrcmFirmwareData.kext, BrcmPatchRAM3.kext, BT4LEContiunityFixup.kext).

You also have to disable the onboard Intel Bluetooth.

In your USB-configuration this is the port HS14. Either add "uia_exclude=HS14" to your Boot-arguments or generate a USBPorts.kext with Hackintool and remove HS14.

If it is still not working, download Bluetooth Explorer from Apple Developser (it is inside "Additional_Tools_for_Xcode_11.4.dmg").

Then start Bluetooth Explorer App, select Tools/HCI Controller Selector. Then you should be able to see your Bluetooth adapter e.g. Apple BRCM. Select it and press "Activate". If it is marked as "Active" it is working.

Thunderbolt 3 Support

In your BIOS set the following settings. You also need the SSDT-TB3.aml in EFI/OC/ACPI to enable Thunerbolt Hotplug support.

Radeonboost.kext

The Radeonboost.kext improves the Graphics performance of AMD Radeon cards. I have a Radeon VII and it improved the OpenCL performance by 22% and in Metal by 38%. According to benchmarks with Geekbench 5.1.0.

Language

Default Keyboard Layout/Language setting was changed to EN-US in v1.5.

If you want to change this, just edit this setting in the config.plist:

- NVRAM
	- Add
		- 7C436110-AB2A-4BBB-A880-FE41995C9F82
			- prev-lang:kbd | String | en-US:0

Valid Keyboard Values see here: AppleKeyboardLayouts.txt

Overclocking Experiences:

The highest Voltage I feel comfortable with for 24/7 is 1.35V.

I unlocked the Power Limit and tried 5.2 and 5.3 Ghz All-Core.

5.3 Ghz crashed in Benchmarks. 5.2Ghz worked. So far everything is working and no further crashing with 5.2Ghz.

5.2 Ghz All-Core is working with 1.31V and is stable so far.

Temps on idle: 35°C.

Temps while running Cinebench e.g. : 75-80°C.

Cooling solution: I have Thermalgrizzly Conductonaut applied, so fluid metal. And I have a custom watercooling loop with 2x 360mm and 1x 480mm radiator. Fans are spinning on minimum RPM until the temps reach 60°C. They reach 100% at 80°C.

Credits

Thanks for your support :) Your help was crucial for my build.

the german hackintosh-community at hackintosh-forum.de: Especially dsm2, CMMChris, brumbaer, JimSalabim
https://github.com/daliansky/XiaoXinPro-13-hackintosh: This repository inspired my first config and gave me the CPU-FakeID. Thank you for that :)
Dortania for this great OpenCore Desktop Guide
headkaze for Hackintool and our productive conversations :)
Acidanthera for too many things to mention each
RehabMan for too many things to mention each
OpenCore project for this great bootloader

Best, Chris aka SchmockLord

bubski / hackintosh-intel-i9-10900k-gigabyte-z490-vision-d Goto Github PK