lsi.sh's Introduction

lsi.sh

Fork of lsi.sh from https://calomel.org/megacli_lsi_commands.html This code is distributed under the CC BY-SA 4.0 License

What is this?

A bash wrapper for the megacli tool from LSI to manage MegaRaid clusters. The megacli-tool is notorious for being cryptic/hard to use 1.

There is also a new tool called storcli 2 which is much nicer to use, but still not as intuitive as it could be.

Usage

Open the lsi.sh file and edit your settings (path and enclosure) for more info visit the post at the beginning of the readme.

[root@cluster ~]# ./lsi 

            OBPG  .:.  lsi.sh  
-----------------------------------------------------
status        = Status of Virtual drives (volumes)
drives        = Status of hard drives
ident $slot   = Blink light on drive (need slot number)
good $slot    = Simply makes the slot "Unconfigured(good)" (need slot number)
replace $slot = Replace "Unconfigured(bad)" drive (need slot number)
progress      = Status of drive rebuild
errors        = Show drive errors which are non-zero
bat           = Battery health and capacity
batrelearn    = Force BBU re-learn cycle
logs          = Print card logs
checkNemail   = Check volume(s) and send email on raid errors
allinfo       = Print out all settings and information about the card
settime       = Set the raid card's time to the current system time
setdefaults   = Set preferred default settings for new raid setup
alarm         = Enable (1) or disable (0) the alarm sound

Recommend Projects