Tools for extracting, modding and re-packaging firmwares of DJI multirotor drones.
The project started as an alternative implementation of the parser from phantom-licensecheck. Over time it has grown to support many generations of DJI products. It consists of tools which allow not only extraction, but also re-packing of the previously extracted modules back into single file. There are also tools which are supposed to be used on specific modules to extract and allow modification of their content.
Such instruction will not be provided. These tools are for engineers with vast hardware and software knowledge. You need to know what you're doing to achieve anything with these tools.
This is to make sure the tools won't be used by script kiddies to disable security mechanisms and to allow breaking the law.
If you can't understand how the tools work, you should not use them. If any warnings are shown, you must investigate the cause to make sure final firmware will not be damaged. You are using the tools on your own risk.
Since all the tools are available in source code form, it is easy to check details on the structure and protocols processed by these tools by looking at their source. The source code is intended to also act as a format documentation.
For higher level and more hardware related info, check the project Wiki.
Below the specific tools are described in short. Running them without parameters will give you details on supported commands in each of them.
To get specifics about command line arguments of each tool, run them with --help
option. Some tools also have additional remarks in their headers - try viewing them.
DJI Firmware xV4 Container tool; allows extracting modules from package file which
starts with xV4, or creating container by merging firmware modules. Use this tool
first, to extract the BIN file downloaded from DJI, as long as the file starts with
xV4.
Example: ./dji_xv4_fwcon.py -vv -x -p P3X_FW_V01.08.0080.bin
DJI Firmware IMaH Un-signer and Decryptor tool; allows to decrypt and un-sign module
from .sig file which starts with IM*H. Use this tool after untarring single
modules from a firmware package, to decrypt its content. The tool can also sign
an un-signed module, as long as private part of the chosen key is available.
Example: ./dji_imah_fwsig.py -vv -u -i wm335_0306_v03.03.04.10_20180429.pro.fw.sig
DJI Mavic Flight Controller Firmware Decryptor tool; removes second layer encryption
in Flight Controller firmware modules from several DJI products released around the
same period: Mavic Pro, Spark, Inspire 2 and Phantom 4. Does not accept IM*H
format - requires input files with first level encryption already removed.
Example: ./dji_mvfc_fwpak.py dec -i wm220_0306_v03.02.40.11_20170918.pro.fw
Ambarella A7/A9 firmware pack tool; allows extracting partitions from the firmware, or merging them back. Use this to extract Ambarella firmware from files created after DJI Container is extracted. You can recognize the Ambarella firmware by a lot of "Amba" strings within, or by a 32-char zero-padded string at the beginning of the file.
Example: ./amba_fwpak.py -vv -x -m P3X_FW_V01.08.0080_m0100.bin
Ambarella A7/A9 firmware ROMFS filesystem tool; allows extracting single files from ROMFS filesystem file, or rebuilding filesystem from the single files. Use this after the Ambarella firmware is extracted. You can recognize ROMFS partitions by file names near beginning of the file, surrounded by blocks of 0xff filled bytes.
Example: ./amba_romfs.py -vv -x -p P3X_FW_V01.08.0080_m0100_part_rom_fw.a9s
Linux script for mounting UBIFS partition from the Ambarella firmware. After
mounting, the files can be copied or modified. Use this after the Ambarella
firmware is extracted. The file containing UBIFS can be easily recognized
by UBI# at the beginning of the file.
Example: sudo ./amba_ubifs.sh P3X_FW_V01.08.0080_m0100_part_rfs.a9s
Tool which wrapps binary executable ARM images with ELF header. If a firmware contains binary image of executable file, this tool can rebuild ELF header for it. The ELF format can be then easily disassembled, as most debuggers can read ELF files. Note that using this tool on encrypted firmwares will not result in useable ELF.
Example: ./arm_bin2elf.py -vv -e -b 0x8020000 -l 0x6000000 -p P3X_FW_V01.07.0060_m0306.bin
The command above will cause the tool to try and detect where the border between
code (.text) and data (.data) sections should be. This detection is not perfect,
especially for binaries with no .ARM.exidx section between them. If .ARM.exidx
exists in the binary, the tool can easily find it and divide binary data properly,
treating .ARM.exidx as a separator between .text and .data.
In other words, position of the .ARM.exidx influences length of the .text section,
and starting offset of the .data section. If there is no .ARM.exidx section in
the file, it will still be used as separator, just with zero size.
After first look at the disassembly, it is good to check where the correct border
between .text and .data sections is located. File offset of this location can
be used to generate better ELF file.
Additional updates to the ELF after first look can include defining .bss sections.
These sections represent uninitialized RAM used by the binary. It is tempting to just
define one big section which covers whole RAM address range according to programming
guide of the chip, but that results in huge memory usage and related slowdowns while
disassembling the file.
Note that all section offsets are defined using start of the BIN file as reference, or in other words - they assume base address of 0x0. If you have found proper location of a section, remember to remove base address from the memory location before inserting to the command line of this tool.
Base address can be often found in programming guide of the specific chip; sometimes it may be shifted from that location, if the binary is loaded by an additional bootloader. In such cases the bootloader takes the location from documentation, and the real firmware binary is loaded at a bit higher base address.
Optimized examples for specific firmwares:
./arm_bin2elf.py -vv -e -b 0x8020000 --section .ARM.exidx@0x085d34:0 --section .bss@0x07fe0000:0xA000 --section .bss2@0x17fe0000:0x30000 --section .bss3@0x37fe0000:0x30000 -p P3X_FW_V01.07.0060_m0306.bin
./arm_bin2elf.py -vv -e -b 0x000a000 --section .ARM.exidx@0x01ce50:0 --section .bss@0xfff6000:0x8000 --section .bss2@0x3fff6000:0x50000 --section .bss3@0xdfff6000:0x10000 -p C1_FW_V01.06.0000_m1400.bin
./arm_bin2elf.py -vv -e -b 0x000a000 --section .ARM.exidx@0x0193E0:0 --section .bss@0x1ff6000:0x4000 --section .bss2@0x1ffe000:0x1000 --section .bss3@0x1bff6000:0x2400 --section .bss4@0x1c01a000:0x2400 --section .bss5@0x40022000:0x50000 --section .bss6@0x400ee000:0x200 --section .bss7@0xe0004000:0x1200 -p C1_FW_V01.06.0000_m1401.bin
./arm_bin2elf.py -vv -e -b 0x8008000 --section .ARM.exidx@0x0D510:0 --section .bss@0x17FF7700:0x5A00 --section .bss2@0x37ff8000:0x6700 --section .bss3@0x38008000:0x5500 --section .bss4@0x38018000:0x2200 --section .bss5@0x3a1f8000:0x100 --section .bss6@0x3a418000:0x500 -p P3X_FW_V01.08.0080_m0900.bin
./arm_bin2elf.py -vv -e -b 0x8008000 --section .ARM.exidx@0x0136D0:0 --section .bss@0x17FF7700:0xC900 --section .bss2@0x37ff8000:0x6700 --section .bss3@0x38008000:0x5500 --section .bss4@0x38018000:0x7000 --section .bss5@0x48058800:0x100 -p P3X_FW_V01.11.0030_m0400.bin
./arm_bin2elf.py -vv -e -b 0x0420000 --section .ARM.exidx@0x00d0e00:0 --section .bss@0x1ffe0000:0x60100 --section .bss2@0x3fcc0000:0x2000 -p wm330_0306_v03.01.10.93_20160707.fw_0306.decrypted.bin
./arm_bin2elf.py -vv -e -b 0x0420000 --section .ARM.exidx@0x01077d0:0 --section .bss@0x1ffe0000:0x60000 --section .bss2@0x3fcc0000:0x1000 --section .bss3@0xdfbe0000:0x10000 -p wm100_0306_v03.02.43.20_20170920.pro.fw_0306.decrypted.bin
./arm_bin2elf.py -vvv -e -b 0x420000 --section .ARM.exidx@0x01265d8:0 --section .bss@0x1ffe0000:0x60100 --section .bss2@0x3fcc0000:0x2000 -p wm220_0306_v03.02.35.05_20170525.pro.fw_0306.decrypted.bin
This tool supports only conversion in direction of bin-to-elf. To convert an ELF
file back to BIN (ie. after modifications), use objcopy utility for the
specific architecture. The objcopy tool is a part of GNU Binary Utilities
(binutils) and not a part of this repository.
Examples:
arm-none-eabi-objcopy -O binary P3X_FW_V01.07.0060_m0100_part_sys.elf P3X_FW_V01.07.0060_m0100_part_sys.bin
arm-none-eabi-objcopy -O binary P3X_FW_V01.07.0060_m0900.elf P3X_FW_V01.07.0060_m0900.bin
Ambarella A7/A9 firmware "System Software" partition converter. The partition
contains a binary image of executable file, and this tool wraps it with ELF
header. The ELF format can be then easily disassembled, as most debuggers can
read ELF files. This tool is very similar to arm_bin2elf.py, it is just
pre-configured to specific firmware.
Example: ./amba_sys2elf.py -vv -e -l 0x6000000 -p P3X_FW_V01.08.0080_m0100_part_sys.a9s
All border adjusting rules explained for arm_bin2elf.py apply for this tool as well.
Optimized examples for specific firmwares:
./amba_sys2elf.py -vv -e -l 0x6000000 --section .ARM.exidx@0x483E4C:0 -p P3X_FW_V01.08.0080_m0100_part_sys.a9s
./amba_sys2elf.py -vv -e -l 0x6000000 --section .ARM.exidx@0x482EC0:0 -p P3X_FW_V01.07.0060_m0100_part_sys.a9s
./amba_sys2elf.py -vv -e -l 0x6000000 --section .ARM.exidx@0x464774:0 -p P3X_FW_V01.01.0008_m0100_part_sys.a9s
Ambarella A7/A9 firmware "System Software" partition hard-coded values editor.
The tool can parse Ambarella firmware SYS partition converted to ELF.
It finds certain hard-coded values in the binary data, and allows
exporting or importing them. Only setValue element in the exported JSON file
is really changeable, all the other data is just informational.
Example of exporting hard-coded values to JSON file:
./amba_sys_hardcoder.py -vv -x --elffile P3X_FW_V01.08.0080_m0100_part_sys.elf
Example of importing values from JSON file back to ELF:
./amba_sys_hardcoder.py -vv -u --elffile P3X_FW_V01.08.0080_m0100_part_sys.elf
Dji DM3xx DaVinci encode_usb binary hard-coded values editor.
The tool can parse encode_usb ELF file from Dji Firmware module for TI DM3xx DaVinci Media Processor. It finds certain hard-coded values in the binary data, and allows exporting or importing them.
Example of exporting hard-coded values to JSON file:
./dm3xx_encode_usb_hardcoder.py -vv -x --elffile P3X_FW_V01.07.0060_m0800-encode_usb.elf
Example of importing values from JSON file back to ELF:
./dm3xx_encode_usb_hardcoder.py -vv -u --elffile P3X_FW_V01.07.0060_m0800-encode_usb.elf
Dji Lightbridge STM32 micro-controller binary hard-coded values editor.
The tool can parse Lightbridge MCU firmware converted to ELF. It finds certain hard-coded values in the binary data, and allows exporting or importing them.
Example of exporting hard-coded values to JSON file:
./lightbridge_stm32_hardcoder.py -vv -x --elffile P3X_FW_V01.07.0060_m0900.elf
Example of importing values from JSON file back to ELF:
./lightbridge_stm32_hardcoder.py -vv -u --elffile P3X_FW_V01.07.0060_m0900.elf
Flight Controller Firmware Parameters Array Editor finds an array of flight parameters within formware binary, and allows to extract the parameters to a JSON format text file. This file can then easily be modified, and used to update binary firmware, changing attributes and limits of each parameter.
In order to find the Parameters Array, the tool needs base address used for loading the binary file into RAM of the micro-controller. If you don't know the base address to use, programming guide of the specific chip used may give you clues.
Example of extracting and then updating the flight controller parameters:
./dji_flyc_param_ed.py -vv -x -m P3X_FW_V01.07.0060_m0306.bin
./dji_flyc_param_ed.py -vv -u -m P3X_FW_V01.07.0060_m0306.bin
More examples, for other products:
./dji_flyc_param_ed.py -vv -x -b 0x420000 -m A3_FW_V01.02.00.00_m0306.bin
./dji_flyc_param_ed.py -vv -x -b 0x420000 -m MATRICE600PRO_FW_V01.00.00.80_m0306.bin
./dji_flyc_param_ed.py -vv -x -b 0x420000 -m wm220_0306_v03.02.35.05_20170525.pro.bin
./dji_flyc_param_ed.py -vv -x -b 0x0000 -m wm230_0306_v01.00.02.255_20170213.bin
DJI Universal Packet Container stream pareser with pcap output format.
The script parses Raw DUPC stream (ie. flight log files FLY???.DAT) and wraps
single packets with PCap headers. Packets CRC is checked before the data is passed.
Any tool with PCap format support can then be used to analyse the data (ie. Wireshark).
Example of converting flight log file:
./comm_dat2pcap.py -vv -d FLY002.DAT
DJI serial bus sniffer with DUPC packetizer and PCap output format.
The script captures data from two UARTs and wraps single DUPC packets with PCap headers. Packets CRC is checked before the data is passed to the PCap file or FIFO pipe. Any tool with pcap format support can then be used to analyse the data (ie. Wireshark).
The utility requires two serial interfaces with RX lines connected to RX and TX lines within the drone.
Example of starting the capture from two UART-to-TTL (aka FTDI) converters:
./comm_serial2pcap.py -b 115200 -F /tmp/wsf /dev/ttyUSB0 /dev/ttyUSB1
DUPC Packet Builder with hex string output.
This tool can build a proper DUPC packet containing given header fields and payload. The packet will be outputed in hexadecimal form. List of known commands and the look of expected payloads can be found in Wireshark dissectors described below.
Example of generating a packet to ask Spark camera module for its Sensor ID:
./comm_mkdupc.py --receiver_type=Camera --seq_num=65280 --ack_type=ACK_After_Exec --cmd_set=Camera --cmd_id=181
DUPC Builder which sends packet to DJI product and receives a response.
This tool builds a proper DUPC packet containing given header fields and payload. Then it sends it via given serial port and waits for response. It shows the returning packet upon receiving it.
Example of asking Flight Controller for hardware and firmware version data (tested on Ph3):
./comm_serialtalk.py /dev/ttyUSB0 -vv --timeout=5000 --receiver_type=FlyController --seq_num=65280 --ack_type=No_ACK_Needed --cmd_set=General --cmd_id=1
OGs Service Tool for Dji products.
The script allows to trigger a few service functions of Dji drones. It talks to the drone
like comm_serialtalk.py, but provides easier interface for some important functions.
Example of listing Flight Controller Parameters 200-300 on Ph3 Pro to CSV format:
./comm_og_service_tool.py /dev/ttyUSB0 P3X FlycParam list --start=200 --count=100 --fmt=csv
Example of getting value of Flight Controller Parameters on Spark:
./comm_og_service_tool.py /dev/ttyUSB0 -vv SPARK FlycParam get g_config.flying_limit.max_height_0 --fmt=2line
Example of setting value of Flight Controller Parameters on Spark:
./comm_og_service_tool.py /dev/ttyUSB0 -vv SPARK FlycParam set g_config.flying_limit.max_height_0 500
Example of performing service "joint coarse" calibration of Spark gimbal:
./comm_og_service_tool.py /dev/ttyUSB0 -vv SPARK GimbalCalib JointCoarse
Example of performing service "linear hall" calibration of Spark gimbal, using Windows host:
python3 comm_og_service_tool.py COM23 -vv SPARK GimbalCalib LinearHall
The folder contains Wireshark dissector for for analyzing communication in DJI drone interfaces.
Documentation of the tool is included in its folder.
For some specific firmware modules in specific versions, there are partial symbols available in 'symbols' directory. The symbols are in two formats:
- MAP files - Can be loaded into most disassemblers with minimal effort. For IDA Pro, there is a plugin which can read MAP files and rename functions and variables accordingly. Only functions and global variables which were given a meaningful names are included in these files.
- IDC script - Format specific to IDA Pro. Stores not only functions and globals, but also type information - enums and structs. Allows storing function parameters and local variables with their names and types, too. Can be easily applied to an opened ELF file via IDA Pro, no other tool will understand it.
Symbols are matched with ELF files generated with the tools described above, not directly with the BINs. Use example commands provided in previous section to generate ELF files with content matching to the symbols.
When working on a firmware version for which no symbols are available, you may want to use a version with symbols for reference in naming.
If you are looking for a best FW version for reference symbols, or you do not care for FW versions at all and just want the most complete symbols - check size of MAP file. MAP file mostly contains manually-named symbols, so the largest one will be for firmware version on which more reversing work was done.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent