This code accompanies the research paper "Masked Software Occlusion Culling", and implements an efficient alternative to the hierarchical depth buffer algorithm. Our algorithm decouples depth values and coverage, and operates directly on the hierarchical depth buffer. It lets us efficiently parallelize both coverage computations and hierarchical depth buffer updates.
Added the ability to merge 2 depth buffers, this allows both an alterative method for parallelizing buffer creation and a way to reduce silhouette bleed when input data cannot be roughly sorted from front to back, for example rendering large terrain patches with foreground occluders in an open world game engine.
This code is mainly optimized for AVX capable CPUs. However, we also provide SSE 4.1 and SSE 2 implementations for backwards compatibility. The appropriate implementation will be chosen during run-time based on the CPU's capabilities.
The code is optimized for runtime performance and may require a long time to compile due to heavy code inlining. This can be worked around by compiling
a library file. An alternative solution is to disable whole program optimizations for the MaskedOcclusionCulling.cpp,
MaskedOcclusionCullingAVX2.cpp and MaskedOcclusionCullingAVX512.cpp files. It does not impact runtime performance, but greatly reduces the time of program linking.
Most inputs are given as clip space (x,y,w) coordinates assuming the same right handed coordinate system as used by DirectX and OpenGL (x positive right, y positive up and w positive in the view direction). Note that we use the clip space w coordinate for depth and disregard the z coordinate. Internally our masked hierarchical depth buffer stores depth = 1 / w.
The TestRect() function is an exception and instead accepts normalized device coordinates (NDC), (x' = x/w, y' = y/w), where the visible screen region
maps to the range [-1,1] for x' and y' (x positive right and y positive up). Again, this is consistent with both DirectX and OpenGL behavior.
By default, the screen space coordinate system used internally to access our hierarchical depth buffer follows DirectX conventions (y positive down), which is
not consistent with OpenGL (y positive up). This can be configured by changing the USE_D3D define. The screen space coordinate system affects the layout
of the buffer returned by the ComputePixelDepthBuffer() function, scissor rectangles (which are specified in screen space coordinates), and rasterization
tie-breaker rules if PRECISE_COVERAGE is enabled.
We have made an effort to keep the API as simple and minimal as possible. The rendering functions are quite similar to submitting DirectX or OpenGL drawcalls and we hope they will feel natural to anyone with graphics programming experience. In the following we will use the example project as a tutorial to showcase the API. Please refer to the documentation in the header file for further details.
We begin by creating a new instance of the occlusion culling object. The object is created using the static Create() function rather than a standard
constructor, and can be destroyed using the Destroy() function. The reason for using the factory Create()/Destroy() design pattern is that we want to
support custom (aligned) memory allocators, and that the library choses either the AVX-512, AVX or SSE implementation based on the CPU's capabilities.
MaskedOcclusionCulling *moc = MaskedOcclusionCulling::Create();
...
MaskedOcclusionCulling::Destroy(moc);The created object is empty and has no hierarchical depth buffer attached, so we must first allocate a buffer using the SetResolution() function. This function can
also be used later to resize the hierarchical depth buffer, causing it to be re-allocated. Note that the resolution width must be a multiple of 8, and the height
a multiple of 4. This is a limitation of the occlusion culling algorithm.
int width = 1920;
int height = 1080;
moc.SetResolution(width, height); // Set full HD resolutionAfter setting the resolution we can start rendering occluders and performing occlusion queries. We must first clear the hierarchical depth buffer
// Clear hierarchical depth buffer to far depth
moc.ClearDepthBuffer();Optional The SetNearClipPlane() function can be used to configure the distance to the near clipping plane to make the occlusion culling renderer match your DX/GL
renderer. The default value for the near plane is 0 which should work as expected unless your application relies on having onscreen geometry clipped by
the near plane.
float nearClipDist = 1.0f;
moc.SetNearClipPlane(nearClipDist); // Set near clipping dist (optional)The RenderTriangles() function renders triangle meshes to the hierarchical depth buffer. Similar to DirectX/OpenGL, meshes are constructed from a vertex array
and an triangle index array. By default, the vertices are given as (x,y,z,w) floating point clip space coordinates, but the z-coordinate is ignored and
instead we use depth = 1 / w. We expose a TransformVertices() utility function to transform vertices from (x,y,z,1) model/world space to (x,y,z,w) clip
space, but you can use your own transform code as well. For more information on the TransformVertices() function, please refer to the documentaiton in the
header file.
The triangle index array is identical to a DirectX or OpenGL triangle list and connects vertices to form triangles. Every three indices in the array form a new triangle, so the size of the array must be a multiple of 3. Note that we only support triangle lists, and we currently have no plans on supporting other primitives such as strips or fans.
struct ClipSpaceVertex { float x, y, z, w; };
// Create an example triangle. The z component of each vertex is not used by the
// occlusion culling system.
ClipspaceVertex triVerts[] = { { 5, 0, 0, 10 }, { 30, 0, 0, 20 }, { 10, 50, 0, 40 } };
unsigned int triIndices[] = { 0, 1, 2 };
unsigned int nTris = 1;
// Render an example triangle
moc.RenderTriangles(triVerts, triIndices, nTris);Transform It is possible to include a transform when calling RenderTriangles(), by passing the modelToClipSpace parameter. This is equivalent to calling TransformVertices(), followed
by RenderTriangles(), but performing the transform as shown in the example below typically
leads to better performance.
// Example matrix swapping the x and y coordinates
float swapxyMatrix[4][4] = {
{0,1,0,0},
{1,0,0,0},
{0,0,1,0},
{0,0,0,1}};
// Render triangle with transform.
moc.RenderTriangles(triVerts, triIndices, nTris, swapxyMatrix);Backface Culling By default, clockwise winded triangles are considered backfacing and are culled when rasterizing occluders. However, you can
configure the RenderTriangles() function to backface cull either clockwise or counter-clockwise winded triangles, or to disable backface culling
for two-sided rendering.
// A clockwise winded (normally backfacing) triangle
ClipspaceVertex cwTriVerts[] = { { 7, -7, 0, 20 },{ 7.5, -7, 0, 20 },{ 7, -7.5, 0, 20 } };
unsigned int cwTriIndices[] = { 0, 1, 2 };
// Render with counter-clockwise backface culling, the triangle is drawn
moc->RenderTriangles((float*)cwTriVerts, cwTriIndices, 1, nullptr, BACKFACE_CCW);The rasterization code only handles counter-clockwise winded triangles, so configurable backface culling is implemented by re-winding clockwise winded triangles
on the fly. Therefore, other culling modes than BACKFACE_CW may decrease performance slightly.
Clip Flags RenderTriangles() accepts an additional parameter to optimize polygon clipping. The calling application may disable any clipping plane if it can
guarantee that the mesh does not intersect said clipping plane. In the example below we have a quad which is entirely on screen, and we can disable
all clipping planes. Warning it is unsafe to incorrectly disable clipping planes and this may cause the program to crash or perform out of bounds
memory accesses. Consider this a power user feature (use CLIP_PLANE_ALL to clip against the full frustum when in doubt).
// Create a quad completely within the view frustum
ClipspaceVertex quadVerts[]
= { { -150, -150, 0, 200 },{ -10, -65, 0, 75 },{ 0, 0, 0, 20 },{ -40, 10, 0, 50 } };
unsigned int quadIndices[] = { 0, 1, 2, 0, 2, 3 };
unsigned int nTris = 2;
// Render the quad. As an optimization, indicate that clipping is not required
moc.RenderTriangles((float*)quadVerts, quadIndices, nTris, nullptr, BACKFACE_CW, CLIP_PLANE_NONE);Vertex Storage Layout Finally, the RenderTriangles() supports configurable vertex storage layout. The code so far has used an array of structs (AoS) layout based
on the ClipSpaceVertex struct, and this is the default behaviour. You may use the VertexLayout struct to configure the memory layout of the vertex data. Note that
the vertex pointer passed to the RenderTriangles() should point at the x coordinate of the first vertex, so there is no x coordinate offset specified in the struct.
struct VertexLayout
{
int mStride; // Stride between vertices
int mOffsetY; // Offset to vertex y coordinate
int mOffsetW; // Offset to vertex w coordinate
};For example, you can configure a struct of arrays (SoA) layout as follows
// A triangle specified on struct of arrays (SoA) form
float SoAVerts[] = {
10, 10, 7, // x-coordinates
-10, -7, -10, // y-coordinates
10, 10, 10 // w-coordinates
};
// Set vertex layout (stride, y offset, w offset)
VertexLayout SoAVertexLayout(sizeof(float), 3 * sizeof(float), 6 * sizeof(float));
// Render triangle with SoA layout
moc.RenderTriangles((float*)SoAVerts, triIndices, 1, nullptr, BACKFACE_CW, CLIP_PLANE_ALL, SoAVertexLayout);Vertex layout may affect performance. We have seen no large performance impact when using either SoA or AoS layout, but generally speaking the vertex position data should be packed as compactly into memory as possible to minimize number of cache misses. It is, for example, not advicable to bundle vertex position data together with normals, texture coordinates, etc. and using a large stride.
After rendering a few occluder meshes you can begin to perform occlusion queries. There are two functions for occlusion queries, called TestTriangles() and
TestRect(). The TestTriangles() function is identical to RenderTriangles() with the exception being that it performs an occlusion query and does not
update the hierarchical depth buffer. The result of the occlusion query is returned as an enum, which indicates if the triangles are VISIBLE, OCCLUDED, or were
VIEW_CULLED. Here, VIEW_CULLED means that all triangles were either frustum or back face culling, so no occlusion culling test had to be performed.
// A triangle that is partly, but not completely, overlapped by the quad rendered before
ClipspaceVertex oqTriVerts[] = { { 0, 50, 0, 200 },{ -60, -60, 0, 200 },{ 20, -40, 0, 200 } };
unsigned int oqTriIndices[] = { 0, 1, 2 };
unsigned int nTris = 1;
// Perform an occlusion query. The triangle is visible and the query should return VISIBLE
CullingResult result = moc.TestTriangles((float*)oqTriVerts, oqTriIndices, nTris);The TestRect() function performs an occlusion query for a rectangular screen space region with a given depth. It can be used to, for example, quickly test
the projected bounding box of an object to determine if the entire object is visible or not. The function is considerably faster than TestTriangles() becuase
it does not require input assembly, clipping, or triangle rasterization. The queries are typically less accurate as screen space bounding rectangles tend to
grow quite large, but we've personally seen best overall performance using this type of culling.
// Perform an occlusion query testing if a rectangle is visible. The rectangle is completely
// behind the previously drawn quad, so the query should indicate that it's occluded
result = moc.TestRect(-0.6f, -0.6f, -0.4f, -0.4f, 100);Unlike the other functions the input to TestRect() is normalized device coordinates (NDC). Normalized device coordinates are projected clip space coordinates
(x' = x/w, y' = y/w) and the visible screen maps to the range [-1,1] for both the x' and y' coordinate. The w coordinate is still given in clip space,
however. It is up to the application to compute projected bounding rectangles from the object's bounding shapes.
We expose a utility function, ComputePixelDepthBuffer() that can be used to visualize the hierarchical depth buffer used internally by the occlusion culling
system. The function fills in a complete per-pixel depth buffer, but the internal representation is hierarchical with just two depth values and a mask stored per
tile. It is not reasonable to expect the image to completely match the exact depth buffer, and you may notice some areas where backrgound objects leak through
the foreground. Leakage is part of the algorithm (and one reason for the high performance), and we have
not found it to be problematic. However, if you experience issues due to leakage you may want to disable the QUICK_MASK define, described in more detail in the
section on hierarchical depth buffer updates.
// Compute a per pixel depth buffer from the hierarchical depth buffer, used for visualization.
float *perPixelZBuffer = new float[width * height];
moc.ComputePixelDepthBuffer(perPixelZBuffer);We also support basic instrumentation to help with profiling and debugging. By defining ENABLE_STATS in the header file, the occlusion culling code will
gather statistics about the number of occluders rendered and occlusion queries performed. For more details about the statistics, see the
OcclusionCullingStatistics struct. The statistics can be queried using the GetStatistics() function, which will simply return a zeroed struct if ENABLE_STATS
is not defined. Note that instrumentation reduces performance somewhat and should generally be disabled in release builds.
OcclusionCullingStatistics stats = moc.GetStatistics();As shown in the example below, you may optionally provide callback functions for allocating and freeing memory when creating a
MaskedOcclusionCulling object. The functions must support aligned allocations.
void *alignedAllocCallback(size_t alignment, size_t size)
{
...
}
void alignedFreeCallback(void *ptr)
{
...
}
MaskedOcclusionCulling *moc = MaskedOcclusionCulling::Create(alignedAllocCallback, alignedFreeCallback);The library contains two update algorithms / heuristics for the hierarchical depth buffer, one focused on speed and one focused on accuracy. The
active algorithm can be configured using the QUICK_MASK define. Setting the define (default) enables algorithm is described in the research paper
"Masked Software Occlusion Culling", which has a good balance between low
leakage and good performance. Not defining QUICK_MASK enables the mergine heuristic used in the paper
"Masked Depth Culling for Graphics Hardware". It is more accurate, with less leakage, but also has lower performance.
If you experience problems due to leakage you may want to use the more accurate update algorithm. However, rendering order can also affect the quality of the hierarchical depth buffer, with the best order being rendering objects front-to-back. We perform early depth culling tests during occluder
rendering, so rendering in front-to-back order will not only improve quality, but also greatly improve performance of occluder rendering. If your scene is stored in a hierarchical data structure, it is often possible to modify the traversal algorithm to traverse nodes in approximate front-to-back order, see the research paper "Masked Software Occlusion Culling" for an example.
The library supports light weight switching between occluder rendering and occlusion queries. While it is still possible to do occlusion culling as a standard two pass algorithm (first render all occluders, then perform all queries) it is typically beneficial to interleave occluder rendering with queries.
This is especially powerful when rendering objects in front-to-back order. After drawing the first few occluder triangles, you can start performing occlusion queries, and if the occlusion query indicate that an object is occluded there is no need to draw the occluder mesh for that object. This can greatly improve the performance of the occlusion culling pass in itself. As described in further detail in the research paper "Masked Software Occlusion Culling", this may be used to perform early exits in BVH traversal code.
The library supports high precision rasterization through Bresenham interpolation, and this may be enabled by changing the PRECISE_COVERAGE define in
the header file. The high precision rasterizer is somewhat slower (5-15%) than using the default rasterizer, but is compliant with DirectX 11 and OpenGL
rasterization rules. We have empirically verified it on a large set of randomly generated on-screen triangles. While there still may be differences to GPU
rasterization due to clipping or vertex transform precision differences, we have not noticed any differences in rasterized coverage in our test scenes. Note
that tie breaker rules and vertex rounding behaves differently between DirectX and OpenGL due to the direction of the screen space Y axis. The USE_D3D define
(enabled by default) can be used to toggle between DirectX or OpenGL behaviour.
Multi-threading is supported through a binning rasterizer. The MaskedOcclusionCulling class exposes two functions, BinTriangles() and RenderTrilist()
that may be used to perform binning, and render all triangles assigned to a bin. Using binned rasterization makes it simple to guarantee that no two threads are
accessing the same part of the framebuffer, as rendering is limited to a particular bin, or region of the screen.
Binned rendering starts by performing geometry processing (primitive assembly, vertex transform, clipping, and projection) followed by a binning step, where
triangles are written to all bins they overlap. This is performed using the BinTriangles() function, which is very similar to the RenderTriangles()
function, but provides some additional parameters for specifying the number of bins the screen is split into. The calling application also needs to pass a
pointer to an array of TriList object, with one instance per bin. Each TriList object points to a "scratchpad" memory buffer, and all triangles overlapping
that bin will be written to the buffer.
const int binsW = 4;
const int binsH = 4;
float *dataBuffer = new float[binsW*BinsH*1024*3*3]; // Allocate storage for 1k triangles in each trilist
TriList *triLists = new TriList[binsW*binsH]; // Allocate trilists for 4x4 = 16 bins
for (int i = 0; i < binsW*BinsH; ++i)
{
triLists[i].mNumTriangles = 1024; // triangle list capacity
triLists[i].mTriIdx = 0; // Set triangle write pointer to first element
triLists[i].mData = dataBuffer + i*1024*1024;
}
// Perform geometry processing and write triangles to the triLists of all bins they overlap.
moc.BinTriangles(triVerts, triIndices, nTris, triLists, binsW, binsW);After generating the triangle lists for each bin, the triangles may be rendered using the RenderTrilist() function and the rendering region should be
limited using a scissor rectangle. It should be noted that the BinTriangles() function makes assumptions on the size of the bins, and the calling
application must therefore always compute the scissor region of each bin, relying on the ComputeBinWidthHeight() utility function as shown in the
example below. Note that the scissor rectangle is specified in screen space coordinates which depends on the USE_D3D define.
unsigned int binWidth, binHeight;
moc.ComputeBinWidthHeight(mBinsW, mBinsH, binWidth, binHeight);
for (int by = 0; by < binsH; ++by)
{
for (int bx = 0; bx < binsW ; ++bx)
{
// Compute scissor rectangle that matches the one assumed by BinTriangles()
// note that the ScissorRect is specified in pixel coordinates, with (0,0)
// being the bottom left corner
ScissorRect binRect;
binRect.minX = bx*binWidth;
binRect.maxX = bx + 1 == binsW ? screenWidth : (bx + 1) * binWidth;
binRect.minY = by*binHeight;
binRect.maxY = by + 1 == binsH ? screenHeight : (by + 1) * binHeight;
// Render all triangles overlapping the current bin.
moc.RenderTrilist(triLists[bx + by*4], &binRect);
}
}This library includes a multi-threading example in the CullingThreadpool class. The class interface is similar to that of MaskedOcclusionCulling, but occluder
rendering is performed asynchronously. Calling the CullingThreadpool::RenderTriangles() function adds a render job to a command queue and immediately return
to the calling thread, rather than immediately performing the rendering work. Internally, the class uses the BinTriangles() and RenderTrilist() functions to
bin all triangles of the CullingThreadpool::RenderTriangles() call, and distribute the tiles. At any time, there may be a number of binning jobs, and tile
rendering jobs unprocessed, and the scheduler picks the most urgent job and process it first. If a thread runs out of available jobs, task stealing is used as a
means of improving load-balancing.
The occlusion query functions CullingThreadpool::TestTriangles() and CullingThreadpool::TestRect() immediately return the result of the query. However, the
query depends on the contents of the hierarchical depth buffer you may need to wait for the worker threads to finish to make sure the query is performed on the
most up to date version of the buffer, this can be accomplished by calling CullingThreadpool::Flush(). It is not always necessary to work with the most up to
date version of the hierarchical depth buffer for a query. While the result may be incorrect, it is still always conservative in that occluded objects may be
classified as visible, but not the other way around. Since the CullingThreadpool::Flush() causes a wait it may be beneficial to work against a slightly out of
date version of the hierarchical depth buffer if your application will cause a lot of flushes. We found this particularly true when implementing threading in
our interleaved BVH traversal algorithm (see the "Masked Software Occlusion Culling"
paper) where each BVH traversal step is based on the outcome of an occlusion query interleaved with occluder rendering for the BVH-leaves.
The CullingThreadpool class was written as an example and not the de-facto threading approach. In some cases we believe it is possible to improve performance
further by threading occlusion queries, or thread the entire occlusion culling system, including scene graph traversal. However, it does provide a simple means
of enabling multi-threading in a traditional single threaded application as the APIs is very similar to the MaskedOcclusionCulling class, and may be called from
a single threaded application. As previously mentioned we integrated this implementation in our interleaved BVH traversal algorithm (see the "Masked Software Occlusion Culling"
paper) and noted speedup of roughly 3x, running on four threads, compared to our previous single threaded implementation.
The code has been reworked to support more platforms and compilers, such as Intel C++ Compiler, G++
and LLVM/Clang. The original Visual Studio 2015 projects remain and works with both ICC and Microsoft's compilers. Other compilers
are supported through CMake. See the CMakeLists.txt files in the Example and FillrateTest folders. You can use CMake to generate a
Visual Studio project for Clang on Windows:
md <path to library>\Example\Clang
cd <path to library>\Example\Clang
cmake -G"Visual Studio 14 2015 Win64" -T"LLVM-vs2014" ..
or build the library with G++/Clang on linux systems (the D3DValidate sample only works on Windows as it relies on Direct 3D)
mkdir <path to library>/Example/Release
cd <path to library>/Example/Release
cmake -DCMAKE_BUILD_TYPE=Release ..
make
Note that AVX-512 support is only experimental at the moment, and has only been verified through Intel SDE.
If using the original visual studio project, you need to "opt in" for AVX-512 support by setting #define USE_AVX512 1. When building with CMake you can
enable AVX support using the -DUSE_AVX512=ON option:
cmake -DUSE_AVX512=ON -G"Visual Studio 14 2015 Win64" -T"LLVM-vs2014" ..
- Version 1.4:
- Added support for merging 2 depth buffers as detailed in GDC 2018 presenation.
- Fixed Profiling counters to be thread safe removing a race condition when runing the CullingThreadpool class.
- Version 1.3:
- Experimental: Added support for AVX-512 capable CPUs. Currently only verified through emulator.
- Added multiplatform support. Code now compiles on Visual C++ Compiler, Intel C++ Compiler, GCC, and Clang.
- Added configurable backface culling, to support two-sided occluder rendering.
- Version 1.2:
- Added support for threading, through a binning rasterizer. The
CullingThreadpoolclass implements an example multi-threaded task system with a very similar API to theMaskedOcclusionCullingclass. - Added support for higher precision rasterization, with DirectX and OpenGL compliant rasterization rules.
- Note: The default screen space coordinate system has been changed from OpenGL to DirectX conventions. If you upgrade from an older version of the library
this will flip the y coordinate of scissor boxes and the images returned by
ComputePixelDepthBuffer(). Disabling theUSE_D3Ddefine changes back to OpenGL conventions.
- Added support for threading, through a binning rasterizer. The
- Version 1.1:
- Added support for SSE4.1 and SSE2 capable CPUs for backwards compatibility. The SSE versions must emulate some operations using simpler instructions, and are therefore less efficient, with the SSE2 version having the lowest performance.
- Version 1.0:
- Initial revision, only support for AVX2 capable CPUs
This code does not exactly match implementation used in "Masked Software Occlusion Culling", and performance may vary slightly from what is presented in the research paper. We aimed for making the API as simple as possible and have removed many limitations, in particular requirements on input data being aligned to SIMD boundaries. This affects performance slightly in both directions. Unaligned loads and gathers are more costly, but unaligned data may be packed more efficiently in memory leading to fewer cache misses.
See the Apache 2.0 license.txt for full license agreement details.
Disclaimer:
This software is subject to the U.S. Export Administration Regulations and other U.S. law, and may not be exported or re-exported to certain countries (Cuba, Iran, North Korea, Sudan, and Syria) or to persons or entities prohibited from receiving U.S. exports (including Denied Parties, Specially Designated Nationals, and entities on the Bureau of Export Administration Entity List or involved with missile technology or nuclear, chemical or biological weapons).
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent