cboittin / twitch-baduk

Automatically send your go games to sabaki, or create an overlay image for your goban while you play, and allow the twitch chat to interact with it.

twitch-Sabaki-bot

Description

This program takes screenshots of the games you play on any application, and either sends them to the Sabaki application, and allows the twitch chat to interact with Sabaki by proposing variations, or generates an overlay image to put over the board on your streaming application, or both.

Currently only works on Windows, tested with python 2.7 and 3.6 in windows 7.

Sabaki github page : https://github.com/SabakiHQ/Sabaki

Usage

Simply run twitch_baduk.py to launch the program. Press escape from anywhere to end it (you have to close Sabaki manually as well). You can interrupt sending moves to Sabaki by pressing ctrl+K, and resume it by pressing ctrl+P again.

Twitch chat can send variations by writing their coordinates, for example : k10 d16 c4 q16 r4. It is possible to force the first move being a specific color by beginning the sequence with b or w : b q16 r14 p17 s16 r17 r11. Variations show in Sabaki and/or on the overlay for a few seconds, depending on the number of moves in the variation, then the game reverts to its current state. You can press ctrl+K to prevent Sabaki from reverting to the game state or receiving new variations.

If double clicking the launcher doesn't work, open a command prompt, navigate to the program's folder and run python twitch_baduk.py. If this doesn't work either, check your PATH environment variable, and verify that it contains python's installation folder, and the Scripts subfolder inside it.

The variations overlay image is located in overlay/overlay.png.

Installation

In order to use the program, you'll need node.js (for Sabaki), python and the listed modules, and the source files from this repo. Then, you'll have to set up the window capture properties so that they fit your screen and resolution, for each application you want to use with this program. If you're not going to use Sabaki but only the goban overlay, then you only need python and its libraries, and you don't have to follow step 4 and 5 of the installation process. You'll have to disable Sabaki in the settings of the program.

The default settings work with IGS/Pandanet, Foxwq, Tygem and CrazyStone, running in fullscreen for a resolution of 1680x1050 on Windows 7.

1. Install python and its libraries

• Get python from : https://www.python.org/downloads/release/python-2714/ (Usually comes pre-installed on linux). If you already have any version of python installed, use that one.
• Install each of the following packages with pip install <package name>
  • keyboard
  • simplejson
  • win32gui
  • tornado
  • PIL
  • pyscreenshot

2. Install the program

• download as zip
• unzip anywhere on your computer
• Rename settings.json.example into settings.json
• Open settings.json in a notepad
  • find generate_overlay_image and set it to false if you don't want to use the overlay image
  • find use_sabaki and set it to false if you don't want to use Sabaki

3. Set up your twitch bot

• Open settings.json.
• Fill in the 3 first properties.
  • twitch_channel : your channel's name in lowercase.
  • twitch_bot_name : the name of your bot in the twitch chat.
  • twitch_bot_oauth : a generated password to identify your bot, that you can get from https://twitchapps.com/tmi.

4. Install Sabaki -- Optional --

• Install node.js from : https://nodejs.org/en/
• open a command line (See )
• go to Sabaki-master
• run command npm install
• run command npm run build
• run command npm start to check if everything works correctly
  • close Sabaki

5. Set up the window capture and/or add new applications to capture -- Optional --

• Open settings.json
• The applications are listed under the servers property. A server is composed of the following properties.
  • name : an identifier for the program.
  • pattern : a string to look for in the application's window title. This is how the program will find the window to capture.
  • crop_left, crop_right, crop_top, crop_bottom : the relative portion (%) of the window to crop out in each direction, in order to get the image of the goban only.
  • i_col : true if the application's coordinate system uses an "i" column.
  • reversed_rows : true if the top row corresponds to the row n°19.

You can add any application you want by copy-pasting the properties for an existing application and replacing their values.

Setting up the window capture

The program uses a simplistic image recognition technique to turn the window capture into a go board position. The cropping therefore needs to be as accurate as possible.

To help you finding the proper settings, you can set the setup_capture property to true. Each screenshot taken by the program will then be shown to you. You still need to restart the program to update the settings every time.

Other useful settings

Hotkeys

• The hotkeys are located under the keys property. Be aware that the hotkeys are active globally, pressing a hotkey in another application might trigger them.
  • endProgram : hotkey to end the program, defaults to escape.
  • toggleCommunication : Interrupts/Resume sending updates to Sabaki

Coordinates

• use_server_coordinates : If set to false, will use the same coordinate system for all applications. Useful if your overlay integrates the coordinates.
• coordinates_use_i_col : Same as "i_col" if you do not use server coordinates, useless otherwise.
• coordinates_reversed_rows : Same as "reversed_rows" if you do not use server coordinates, useless otherwise.

Twitch chat moves

• allowed_variations_per_user : You can limit the number of variations (move sequences) a user is allowed to post. Resets every few minutes.
• reset_variation_count_timer : Time in minutes before resetting the variation count for everyone.
• base_variation_displaying_time: Base time a variation stays on screen.
• variation_displaying_time_per_stone: Additional time a variation stays on screen, depending on the number of moves in it.

Overlay & Sabaki

• generate_overlay_image : generate the overlay image when tiwtch proposes a variation
• overlay_image_path: ./overlay/overlay.png,
• overlay_padding_left, overlay_padding_right, overlay_padding_top, overlay_padding_bottom : reduces the area of the overlay in which to display the moves
• use_sabaki : Launch sabaki with the program, and the window capture to generate go games
• time_between_captures: Time in seconds between 2 window captures. Decrease for more responsiveness, increase if it slows your computer down.

TODO

• Add hotkey to recreate sgf with all proposed variations
• Add hotkey to save sgf
• OBS plugin to switch scenes when a variation is proposed
• Find a way to detect snapbacks when 2 moves have been played before last update
• Allow chat to restore a previous game state, or expand on a previous variation
• Code cleaning
• Probably some bug fixing

How to navigate to a directory with the command prompt

To open a command prompt on windows, open the start menu and type cmd. On most linux installations, press ctrl+alt+T. Use the command cd, which stands for "change directory".

examples :   cd C:\Users\Me\Desktop\twitch-baduk
            cd Sabaki-master

On windows, if the program's folder is on the D: drive, you can change the drive by entering d:.

twitch-baduk's Issues

Problem downloading libraries

ERROR: Could not find a version that satisfies the requirement PIL (from versions: none) ERROR: No matching distribution found for PIL

Honestly, I'm new to terminal, python and I don't understand the need to download Sabaki via NodeJS, so I'm probably the one doing something wrong.

I would like to be able to run this code, it is just what I need.