PulledPork for Snort and Suricata rule management (from Google code)
Find us on Freenode (IRC) #ppork
Copyright (C) 2009-2017 JJ Cummings, Michael Shirk and the PulledPork Team!
Thank you for choosing to use PulledPork! This file provides some basic guidance on the usage of PulledPork. Please be sure to read this file thoroughly so that you don't overlook something!
- Automated downloading, parsing, state modification and rule modification for all of your snort rulesets.
- Checksum verification for all major rule downloads
- Automatic generation of updated sid-msg.map file
- Capability to include your local.rules in sid-msg.map file
- Capability to pull rules tarballs from custom urls
- Complete Shared Object support
- Complete IP Reputation List support
- Capability to download multiple disparate rulesets at once
- Maintains accurate changelog
- Capability to HUP processes after rules download and process
- Aids in tuning of rulesets
- Verbose output so that you know EXACTLY what is happening
- Minimal Perl Module dependencies
- Support for Suricata, and ETOpen/ETPro rulesets
- A sweet smokey flavor throughout the pork!
Usage: ./pulledpork.pl [-dEgHklnRTPVvv? -help] -c <config filename> -o <rule output path>
-O <oinkcode> -s <so_rule output directory> -D <Distro> -S <SnortVer>
-p <path to your snort binary> -C <path to your snort.conf> -t <sostub output path>
-h <changelog path> -H <signal_name> -I (security|connectivity|balanced) -i <path to disablesid.conf>
-b <path to dropsid.conf> -e <path to enablesid.conf> -M <path to modifysid.conf>
-r <path to docs folder> -K <directory for separate rules files>
Options:
-help/? Print this help info.
-b Where the dropsid config file lives.
-C Path to your snort.conf
-c Where the pulledpork config file lives.
-d Do not verify signature of rules tarball, i.e. downloading fron non VRT or ET locations.
-D What Distro are you running on, for the so_rules
Valid Distro Types:
Debian-6-0, Ubuntu-10-4, Ubuntu-12-04, Centos-5-4
FC-12, FC-14, RHEL-5-5, RHEL-6-0
FreeBSD-8-1, FreeBSD-9-0, FreeBSD-10-0, OpenBSD-5-2, OpenBSD-5-3
OpenSUSE-11-4, OpenSUSE-12-1, Slackware-13-1
-e Where the enablesid config file lives.
-E Write ONLY the enabled rules to the output files.
-g grabonly (download tarball rule file(s) and do NOT process)
-h path to the sid_changelog if you want to keep one?
-H Send signal_name to the pids listed in the config file (SIGHUP or SIGUSR2)
-I Specify a base ruleset( -I security,connectivity,or balanced, see README.RULESET)
-i Where the disablesid config file lives.
-k Keep the rules in separate files (using same file names as found when reading)
-K Where (what directory) do you want me to put the separate rules files?
-l Log Important Info to Syslog (Errors, Successful run etc, all items logged as WARN or higher)
-L Where do you want me to read your local.rules for inclusion in sid-msg.map
-m where do you want me to put the sid-msg.map file?
-M where the modifysid config file lives.
-n Do everything other than download of new files (disablesid, etc)
-o Where do you want me to put generic rules file?
-p Path to your Snort binary
-P Process rules even if no new rules were downloaded
-R When processing enablesid, return the rules to their ORIGINAL state
-r Where do you want me to put the reference docs (xxxx.txt)
-S What version of snort are you using
-s Where do you want me to put the so_rules?
-T Process text based rules files only, i.e. DO NOT process so_rules
-u Where do you want me to pull the rules tarball from
** E.g., ET, Snort.org. See pulledpork config rule_url option for value ideas
-V Print Version and exit
-v Verbose mode, you know.. for troubleshooting and such nonsense.
-vv EXTRA Verbose mode, you know.. for in-depth troubleshooting and other such nonsense.
-w Skip the SSL verification (if there are issues pulling down rule files)
-W Where you want to work around the issue where some implementations of LWP do not work with pulledpork's proxy configuration.
A simple example of how to use PulledPork would be to specify all of your configuration directives inside of the
PulledPork.conf
file. Specifically for minimal function, i.e. NO Shared Object rule processing you must define
at a minimum the rule_file
, oinkcode
, temp_path
, tar_path
, and rule_path
values. Below are some examples of this.
./pulledpork.pl -o /usr/local/etc/snort/rules/ -O 12345667778523452344234234 \
-u http://www.snort.org/reg-rules/snortrules-snapshot-2973.tar.gz -i disablesid.conf -T -H
The above will fetch the snortrules-snapshot-2973.tar.gz
tarball from snort.org using the specified oinkcode
of
12345667778523452344234234
and put the rules files from that tarball into the output path of
/usr/local/etc/snort/rules/
while the -i
option tells pulledpork where the
disablesid.conf
lives, and the -T
option tells pulledpork to not process for any shared object rules and the final
-H
option tells pulledpork to send a Hangup
signal to the snort pid that you defined in the pulledpork.conf
.
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -T -H
Similar to the first example but all options specified in the pulledpork.conf
file (other than disablesid
and -H
)...
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -m /usr/local/etc/snort/sid-msg.map -Hn
The above will simply read the disablesid and disable as defined, then send a Hangup
signal after generating the sid-msg.map
at the specified location without downloading anything.
Highly useful when tuning / making changes etc..
Next example, snort inline with rules that we want to drop and disable, then HUP
our daemons after creating a sid-msg.map
and writing change info to sid_changes.log
!
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -m /usr/local/etc/snort/sid-msg.map \
-h /var/log/sid_changes.log -H
Next example, same as the previous but specifying that we want to run the default "security" based ruleset
and that we want to enable rules specified in enablesid.conf
.
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -e enablesid.conf -m /usr/local/etc/snort/sid-msg.map \
-h /var/log/sid_changes.log -I security -H
Next example, same as the previous but specifying that we want to -K
(Keep) the originationg tarball names.
and write them to /usr/local/etc/snort/rules/
./pulledpork.pl -c pulledpork.conf -i disablesid.conf -b dropsid.conf -e enablesid.conf -m /usr/local/etc/snort/sid-msg.map \
-h /var/log/sid_changes.log -I security -H -K /usr/local/etc/snort/rules/
For users of Suricata, the same steps are necessary for where your installation files reside, but all that pulledpork needs to process
rule files is the -S
flag being set to suricata-3.1.3
or whatever version of suricata you are using
./pulledpork.pl -c pulledpork.conf -S suricata-3.1.3
Please note that pulledpork runs rule modification (enable, drop, disable, modify) in that order by default..
1: enable
2: drop
3: disable
This means that disable rules will always take precedence.. thusly if you specify the same gid:sid
in enable and disable configuration files, then that sid will be disabled.. keep this in mind
for ranges also! However, you can specify a different order using the state_order keyword in the
master config file.
I'll probably add more info later, the --help
or --?
will display all runtime options and the pulledpork.conf
is
pretty well annotated... so if you can't figure it out... try harder! And once you figure it out, please feel
free to contribute with additional readme / help foo.. thx!
As a side note, I would like to give a shout-out to my buddy Bruce for aiding in the naming of PulledPork! "hopefully that will shut him up ;-)"
J