classicvalues / vscode-eslint

VSCode extension to integrate eslint into VSCode

VS Code ESLint extension

Integrates ESLint into VS Code. If you are new to ESLint check the documentation.

The extension uses the ESLint library installed in the opened workspace folder. If the folder doesn't provide one the extension looks for a global install version. If you haven't installed ESLint either locally or globally do so by running npm install eslint in the workspace folder for a local install or npm install -g eslint for a global install.

On new folders you might also need to create a .eslintrc configuration file. You can do this by either using the VS Code command Create ESLint configuration or by running the eslint command in a terminal. If you have installed ESLint globally (see above) then run eslint --init in a terminal. If you have installed ESLint locally then run .\node_modules\.bin\eslint --init under Windows and ./node_modules/.bin/eslint --init under Linux and Mac.

Release Notes

This section describes major releases and their improvements. For a detailed list of changes please refer to the change log.

Version 2.2.0

Added support for ESLint V8.0 Beta. To stay backwards compatible with eslint settings the version still uses the CLIEngine if available. However users can force the use of the new ESLint API using the setting eslint.useESLintClass.

Version 2.1.22

Adapt VS Code's workspace trust model. As a consequence the custom dialog ESLint introduced in version 2.1.7 got removed. In addition the off value got added to the eslint rule customization support.

Version 2.1.20

Added support to customize the severity of eslint rules. See the new setting eslint.rules.customizations.

Version 2.1.18

Asking for confirmation of the eslint.nodePath value revealed a setup where that value is defined separately on a workspace folder level although a multi workspace folder setup is open (e.g. a code-workspace file). These setups need to define the eslint.nodePath value in the corresponding code-workspace file and the extension now warns the user about it. Below an example of such a code-workspace file

{
        "folders": [
                {
                        "path": "project-a"
                },
                {
                        "path": "project-b"
                }
        ],
        "settings": {
                "eslint.nodePath": "myCustomNodePath"
        }
}

Version 2.1.17

To follow VS Code's model to confirm workspace local settings that impact code execution the two settings eslint.runtime and eslint.nodePath now need user confirmation if defined locally in a workspace folder or a workspace file. Users using these settings in those local scopes will see a notification reminding them of the confirmation need.

The version also adds a command to restart the ESLint server.

Version 2.1.10

The approval flow to allow the execution of a ESLint library got reworked. Its initial experience is now as follows:

• no modal dialog is shown when the ESLint extension tries to load an ESLint library for the first time and an approval is necessary. Instead the ESLint status bar item changes to indicating that the execution is currently block.
• if the active text editor content would be validated using ESLint, a problem at the top of the file is shown in addition.

The execution of the ESLint library can be denied or approved using the following gestures:

• clicking on the status bar icon
• using the quick fix for the corresponding ESLint problem
• executing the command ESLint: Manage Library Execution from the command palette

All gestures will open the following dialog:

The chosen action is then reflected in the ESLint status bar item in the following way:

• Allow will prefix the status bar item with a check mark.
• Allow Everywhere will prefix the status bar item with a double check mark.
• Deny and Disable will prefix the status bar item with a blocked sign.

You can manage our decisions using the following commands:

• ESLint: Manage Library Execution will reopen aboves dialog
• ESLint: Reset Library Decisions lets you reset previous decisions who have made.

This release also addresses the vulnerability described in CVE-2021-27081.

Version 2.0.4

The 2.0.4 version of the extension contains the following major improvements:

• Improved TypeScript detection - As soon as TypeScript is correctly configured inside ESLint, you no longer need additional configuration through VS Code's eslint.validate setting. The same is true for HTML and Vue.js files.
• Glob working directory support - Projects that have a complex folder structure and need to customize the working directories via eslint.workingDirectories can now use glob patterns instead of listing every project folder. For example, { "pattern": "code-*" } will match all project folders starting with code-. In addition, the extension now changes the working directory by default. You can disable this feature with the new !cwd property.
• Formatter support: ESLint can now be used as a formatter. To enable this feature use the eslint.format.enable setting.
• Improved Auto Fix on Save - Auto Fix on Save is now part of VS Code's Code Action on Save infrastructure and computes all possible fixes in one round. It is customized via the editor.codeActionsOnSave setting. The setting supports the ESLint specific property source.fixAll.eslint. The extension also respects the generic property source.fixAll.

The setting below turns on Auto Fix for all providers including ESLint:

    "editor.codeActionsOnSave": {
        "source.fixAll": true
    }

In contrast, this configuration only turns it on for ESLint:

    "editor.codeActionsOnSave": {
        "source.fixAll.eslint": true
    }

You can also selectively disable ESLint via:

    "editor.codeActionsOnSave": {
        "source.fixAll": true,
        "source.fixAll.eslint": false
    }

Also note that there is a time budget of 750ms to run code actions on save which might not be enough for large JavaScript / TypeScript file. You can increase the time budget using the editor.codeActionsOnSaveTimeout setting.

The old eslint.autoFixOnSave setting is now deprecated and can safely be removed.

Settings Options

If you are using an ESLint extension version < 2.x then please refer to the settings options here.

This extension contributes the following variables to the settings:

• eslint.enable: enable/disable ESLint for the workspace folder. Is enabled by default.

• eslint.debug: enables ESLint's debug mode (same as --debug command line option). Please see the ESLint output channel for the debug output. This options is very helpful to track down configuration and installation problems with ESLint since it provides verbose information about how ESLint is validating a file.

• eslint.lintTask.enable: whether the extension contributes a lint task to lint a whole workspace folder.

• eslint.lintTask.options: Command line options applied when running the task for linting the whole workspace (https://eslint.org/docs/user-guide/command-line-interface). An example to point to a custom .eslintrc.json file and a custom .eslintignore is:

  {
    "eslint.lintTask.options": "-c C:/mydirectory/.eslintrc.json --ignore-path C:/mydirectory/.eslintignore ."
  }

• eslint.packageManager: controls the package manager to be used to resolve the ESLint library. This has only an influence if the ESLint library is resolved globally. Valid values are "npm" or "yarn" or "pnpm".

• eslint.options: options to configure how ESLint is started using either the ESLint class API or the CLIEngine API. The extension uses the ESLint class API if ESLint version 8 or higher is used or if ESLint version 7 is used and the setting eslint.useESLintCLass is set to true. I all other cases the CLIEngine API is used. An example to point to a custom .eslintrc.json file using the new ESLint API is:

  {
    "eslint.options": { "overrideConfigFile": "C:/mydirectory/.eslintrc.json" }
  }

  An example to point to a custom .eslintrc.json file using the old CLIEngine API is:

  {
    "eslint.options": { "configFile": "C:/mydirectory/.eslintrc.json" }
  }

• eslint.useESLintClass (@since 2.2.0) - whether to use the ESLint class API even if the CLIEngine API is present. The setting is only honor when using using ESLint version 7.x.

• eslint.run - run the linter onSave or onType, default is onType.

• eslint.quiet - ignore warnings.

• eslint.runtime - use this setting to set the path of the node runtime to run ESLint under. Use "node" if you want to use your default system version of node.

• eslint.runtime.execArgv - use this setting to pass additional arguments to the node runtime like --max_old_space_size=4096

• eslint.nodeEnv - use this setting if an ESLint plugin or configuration needs process.env.NODE_ENV to be defined.

• eslint.nodePath - use this setting if an installed ESLint package can't be detected, for example /myGlobalNodePackages/node_modules.

• eslint.probe = an array for language identifiers for which the ESLint extension should be activated and should try to validate the file. If validation fails for probed languages the extension says silent. Defaults to ["javascript", "javascriptreact", "typescript", "typescriptreact", "html", "vue", "markdown"].

• eslint.validate - an array of language identifiers specifying the files for which validation is to be enforced. This is an old legacy setting and should in normal cases not be necessary anymore. Defaults to ["javascript", "javascriptreact"].

• eslint.format.enable: enables ESLint as a formatter for validated files. Although you can also use the formatter on save using the setting editor.formatOnSave it is recommended to use the editor.codeActionsOnSave feature since it allows for better configurability.

• eslint.workingDirectories - specifies how the working directories ESLint is using are computed. ESLint resolves configuration files (e.g. eslintrc, .eslintignore) relative to a working directory so it is important to configure this correctly. If executing ESLint in the terminal requires you to change the working directory in the terminal into a sub folder then it is usually necessary to tweak this setting. (see also ESLint class options#cwd). Please also keep in mind that the .eslintrc* file is resolved considering the parent directories whereas the .eslintignore file is only honored in the current working directory. The following values can be used:

  • [{ "mode": "location" }] (@since 2.0.0): instructs ESLint to uses the workspace folder location or the file location (if no workspace folder is open) as the working directory. This is the default and is the same strategy as used in older versions of the ESLint extension (1.9.x versions).
  • [{ "mode": "auto" }] (@since 2.0.0): instructs ESLint to infer a working directory based on the location of package.json, .eslintignore and .eslintrc* files. This might work in many cases but can lead to unexpected results as well.
  • string[]: an array of working directories to use. Consider the following directory layout:

    root/
      client/
        .eslintrc.json
        client.js
      server/
        .eslintignore
        .eslintrc.json
        server.js
    

    Then using the setting:

      "eslint.workingDirectories": [ "./client", "./server" ]

    will validate files inside the server directory with the server directory as the current eslint working directory. Same for files in the client directory. The ESLint extension will also change the process's working directory to the provided directories. If this is not wanted a literal with the !cwd property can be used (e.g. { "directory": "./client", "!cwd": true }). This will use the client directory as the ESLint working directory but will not change the process`s working directory.
  • [{ "pattern": glob pattern }] (@since 2.0.0): Allows to specify a pattern to detect the working directory. This is basically a short cut for listing every directory. If you have a mono repository with all your projects being below a packages folder you can use { "pattern": "./packages/*/" } to make all these folders working directories.

• eslint.codeAction.disableRuleComment - object with properties:

  • enable - show disable lint rule in the quick fix menu. true by default.
  • location - choose to either add the eslint-disable comment on the separateLine or sameLine. separateLine is the default. Example:

    { "enable": true, "location": "sameLine" }

• eslint.codeAction.showDocumentation - object with properties:

  • enable - show open lint rule documentation web page in the quick fix menu. true by default.

• eslint.codeActionsOnSave.mode (@since 2.0.12) - controls which problems are fix when running code actions on save

  • all: fixes all possible problems by revalidating the file's content. This executes the same code path as running eslint with the --fix option in the terminal and therefore can take some time. This is the default value.
  • problems: fixes only the currently known fixable problems as long as their textual edits are non overlapping. This mode is a lot faster but very likely only fixes parts of the problems.

• eslint.codeActionsOnSave.rules (@since 2.2.0) - controls the rules which are taken into consideration during code action on save execution. If not specified all rules specified via the normal ESLint configuration mechanism are consider. An empty array results in no rules being considered. If the array contains more than one entry the order matters and the first match determines the rule's on / off state. This setting is only honored if either ESLint version 8 or greater is used or ESLint version 7 is used and the setting eslint.useESLintClass is set to true.

  In this example only semicolon related rules are considered:

  "eslint.codeActionsOnSave.rules": [
    "*semi*"
  ]

  This example removes all TypeScript ESLint specific rules from the code action on save pass but keeps all other rules:

  "eslint.codeActionsOnSave.rules": [
    "!@typescript-eslint/*",
    "*"
  ]

  This example keeps the indent and semi rule from TypeScript ESLint, disables all other TypeScript ESLint rules and keeps the rest:

  "eslint.codeActionsOnSave.rules": [
      "@typescript-eslint/semi",
      "@typescript-eslint/indent",
      "!@typescript-eslint/*",
      "*"
  ]

• eslint.rules.customizations (@since 2.1.20) - force rules to report a different severity within VS Code compared to the project's true ESLint configuration. Contains two properties:

  • "rule": Select on rules with names that match, factoring in asterisks as wildcards: { "rule": "no-*", "severity": "warn" }
    • Prefix the name with a "!" to target all rules that don't match the name: { "rule": "!no-*", "severity": "info" }
  • "severity": Sets a new severity for matched rule(s), "downgrade"s them to a lower severity, "upgrade"s them to a higher severity, or "default"s them to their original severity

  In this example, all rules are overridden to warnings:

  "eslint.rules.customizations": [
    { "rule": "*", "severity": "warn" }
  ]

  In this example, no- rules are informative, other rules are downgraded, and "radix" is reset to default:

  "eslint.rules.customizations": [
    { "rule": "no-*", "severity": "info" },
    { "rule": "!no-*", "severity": "downgrade" },
    { "rule": "radix", "severity": "default" }
  ]

• eslint.format.enable (@since 2.0.0) - uses ESlint as a formatter for files that are validated by ESLint. If enabled please ensure to disable other formatters if you want to make this the default. A good way to do so is to add the following setting "[javascript]": { "editor.defaultFormatter": "dbaeumer.vscode-eslint" } for JavaScript. For TypeScript you need to add "[typescript]": { "editor.defaultFormatter": "dbaeumer.vscode-eslint" }.

• eslint.onIgnoredFiles (@since 2.0.10): used to control whether warnings should be generated when trying to lint ignored files. Default is off. Can be set to warn.

• editor.codeActionsOnSave (@since 2.0.0): this setting now supports an entry source.fixAll.eslint. If set to true all auto-fixable ESLint errors from all plugins will be fixed on save. You can also selectively enable and disabled specific languages using VS Code's language scoped settings. To disable codeActionsOnSave for HTML files use the following setting:

  "[html]": {
    "editor.codeActionsOnSave": {
      "source.fixAll.eslint": false
    }
  }

The old eslint.autoFixOnSave setting is now deprecated and can safely be removed. Please also note that if you use ESLint as your default formatter you should turn off editor.formatOnSave when you have turned on editor.codeActionsOnSave. Otherwise you file gets fixed twice which in unnecessary.

Settings Migration

If the old eslint.autoFixOnSave option is set to true ESLint will prompt to convert it to the new editor.codeActionsOnSave format. If you want to avoid the migration you can respond in the dialog in the following ways:

• Not now: the setting will not be migrated by ESLint prompts again the next time you open the workspace
• Never migrate Settings: the settings migration will be disabled by changing the user setting eslint.migration.2_x to off

The migration can always be triggered manually using the command ESLint: Migrate Settings

Commands:

This extension contributes the following commands to the Command palette.

• Create '.eslintrc.json' file: creates a new .eslintrc.json file.
• Fix all auto-fixable problems: applies ESLint auto-fix resolutions to all fixable problems.
• Reset Library Decisions: Resets the ESLint library validation confirmations.
• Manage Library Execution: Opens the library execution confirmation dialog.

Using the extension with VS Code's task running

The extension is linting an individual file only on typing. If you want to lint the whole workspace set eslint.lintTask.enable to true and the extension will also contribute the eslint: lint whole folder task. There is no need anymore to define a custom task in tasks.json.

Using ESLint to validate TypeScript files

A great introduction on how to lint TypeScript using ESlint can be found in the TypeScript - ESLint. Please make yourself familiar with the introduction before using the VS Code ESLint extension in a TypeScript setup. Especially make sure that you can validate TypeScript files successfully in a terminal using the eslint command.

This project itself uses ESLint to validate its TypeScript files. So it can be used as a blueprint to get started.

To avoid validation from any TSLint installation disable TSLint using "tslint.enable": false.

Mono repository setup

As with JavaScript validating TypeScript in a mono repository requires that you tell the VS Code ESLint extension what the current working directories are. Use the eslint.workingDirectories setting to do so. For this repository the working directory setup looks as follows:

	"eslint.workingDirectories": [ "./client", "./server" ]

ESLint 6.x

Migrating from ESLint 5.x to ESLint 6.x might need some adaption (see the ESLint Migration Guide for details). Before filing an issue against the VS Code ESLint extension please ensure that you can successfully validate your files in a terminal using the eslint command.