cnsuhao / mpvhq-old

Video player based on MPlayer/mplayer2/mpv

mpvhq (unmaintained)

---

• Overview
• Downloads
• Compilation
• FFmpeg vs. Libav
• Release cycle
• Bug reports
• Contributing
• Relation to MPlayer and mplayer2
• Wiki
• Man pages
• Contact
• License

Overview

mpvhq is a media player based on MPlayer, mplayer2 and mpv. It supports a wide variety of video file formats, audio and video codecs, and subtitle types.

Releases can be found on the release list.

System requirements

• A not too ancient Linux, or Windows Vista or later, or OSX 10.8 or later.
• A somewhat capable CPU. Hardware decoding might sometimes help if the CPU is too slow to decode video realtime, but must be explicitly enabled with the --hwdec option. On Windows, a CPU with SSE4 instruction set is required to get decent hardware decoding performance.
• A not too crappy GPU. mpv is not intended to be used with bad GPUs. There are many caveats with drivers or system compositors causing tearing, stutter, etc. On Windows, you might want to make sure the graphics drivers are current, especially OpenGL. In some cases, ancient fallback video output methods can help (such as --vo=xv on Linux), but this use is not recommended or supported.

Downloads

For semi-official builds and third-party packages of the official mpv please see mpv.io.

Packages for this particular fork are available for the following distributions:

• CRUX (6c37/mpvhq)

• Gentoo (haasn/gentoo-overlay)

Compilation

Compiling with full features requires development files for several external libraries. Below is a list of some important requirements.

The mpv build system uses waf but we don't store it in your source tree. The script './bootstrap.py' will download the latest version of waf that was tested with the build system.

For a list of the available build options use ./waf configure --help. If you think you have support for some feature installed but configure fails to detect it, the file build/config.log may contain information about the reasons for the failure.

NOTE: To avoid cluttering the output with unreadable spam, --help only shows one of the two switches for each option. If the option is autodetected by default, the --disable-*** switch is printed; if the option is disabled by default, the --enable-*** switch is printed. Either way, you can use --enable-*** or --disable-** regardless of what is printed by --help.

To build the software you can use ./waf build: the result of the compilation will be located in build/mpv. You can use ./waf install to install mpv to the prefix after it is compiled.

Essential dependencies (incomplete list):

• gcc or clang
• X development headers (xlib, X extensions, libvdpau, libGL, libXv, ...)
• Audio output development headers (libasound/ALSA, pulseaudio)
• FFmpeg libraries (libavutil libavcodec libavformat libswscale libavfilter and either libswresample or libavresample) At least FFmpeg 2.4.0 or Libav 11 is required.
• zlib
• iconv (normally provided by the system libc)
• libass (OSD, OSC, text subtitles)
• Lua (optional, required for the OSC pseudo-GUI and youtube-dl integration)
• libjpeg (optional, used for screenshots only)
• uchardet (optional, for subtitle charset detection)
• vdpau and vaapi libraries for hardware decoding on Linux (optional)

Libass dependencies:

• gcc or clang, yasm on x86 and x86_64
• fribidi, freetype, fontconfig development headers (for libass)
• harfbuzz (optional, required for correct rendering of combining characters, particularly for correct rendering of non-English text on OSX, and Arabic/Indic scripts on any platform)

FFmpeg dependencies:

• gcc or clang, yasm on x86 and x86_64
• OpenSSL (has to be explicitly enabled when compiling ffmpeg)
• libx264/libmp3lame/libfdk-aac if you want to use encoding (has to be explicitly enabled when compiling ffmpeg)
• Libav also works, but some features will not work. (See section below.)

Most of the above libraries are available in suitable versions on normal Linux distributions. However FFmpeg is an exception (distro versions may be too old to work at all or work well). For that reason you may want to use the separately available build wrapper (mpv-build) that first compiles FFmpeg libraries and libass, and then compiles the player statically linked against those.

If you want to build a Windows binary, you either have to use MSYS2 and MinGW, or cross-compile from Linux with MinGW. See Windows compilation.

FFmpeg vs. Libav

Generally, mpvhq should work with the latest release as well as the git version of both FFmpeg and Libav. But FFmpeg is preferred, and some mpv features work with FFmpeg only (subtitle formats in particular).

Release cycle

Every few months, a new release is cut off of the master branch and is assigned a 0.X.0 version number.

As part of the maintenance process, minor releases are made, which are assigned 0.X.Y version numbers. Minor releases contain bug fixes only. They never merge the master branch, and no features are added to it. Only the latest release is maintained.

The goal of releases is to provide stability and an unchanged base for the sake of Linux distributions. If you want the newest features, just use the master branch, which is stable most of the time, except sometimes, when it's not.

Releases other than the latest release are unsupported and unmaintained.

See the release policy document for more information.

Bug reports

Please use the issue tracker provided by GitHub to send us bug reports or feature requests.

Contributing

For small changes you can just send us pull requests through GitHub. For bigger changes come and talk to us on IRC before you start working on them. It will make code review easier for both parties later on.

Relation to MPlayer, mplayer2 and mpv

mpv is based on mplayer2, which in turn is based on the original MPlayer (also called mplayer, mplayer-svn, mplayer1). Many changes have been made, a large part of which is incompatible or completely changes how the player behaves. Although there are still many similarities to its ancestors, mpv should generally be treated as a completely different program.

mpv was forked because we wanted to modernize MPlayer. This includes removing cruft (including features which stopped making sense 10 years ago), and of course adding modern features. Such huge and intrusive changes made it infeasible to work directly with MPlayer, which is mostly focused on preservation, so a fork had to be made. (Actually, mpv is based on mplayer2, which already started this process of removing cruft.)

In general, mpv should be considered a completely new program, rather than a MPlayer drop-in replacement.

mpvhq is based on mpv and focuses on videophile quality features and was originally created because of disagreements with the mpv developers, but currently exists more as a testbed for my own personal improvements, that will hopefully all make their way back into mpv.

If you are wondering what's different from mplayer2 and MPlayer, an incomplete list of changes is located here.

Contact

Most activity happens on the IRC channel and the github issue tracker. The mailing lists are mostly unused.

• GitHub issue tracker: issue tracker (report bugs here)
• User IRC Channel: #mpv on irc.freenode.net
• Developer IRC Channel: #mpv-devel on irc.freenode.net

To contact the mpv team in private write to [email protected]. Use only if discretion is required.

License

Mostly GPLv2 or later. See details.