codeaudit / wide-residual-networks

3.8% and 18.3% on CIFAR-10 and CIFAR-100

Wide Residual Networks

This code was used for experiments with Wide Residual Networks (BMVC 2016) http://arxiv.org/abs/1605.07146 by Sergey Zagoruyko and Nikos Komodakis.

Deep residual networks were shown to be able to scale up to thousands of layers and still have improving performance. However, each fraction of a percent of improved accuracy costs nearly doubling the number of layers, and so training very deep residual networks has a problem of diminishing feature reuse, which makes these networks very slow to train.

To tackle these problems, in this work we conduct a detailed experimental study on the architecture of ResNet blocks, based on which we propose a novel architecture where we decrease depth and increase width of residual networks. We call the resulting network structures wide residual networks (WRNs) and show that these are far superior over their commonly used thin and very deep counterparts.

For example, we demonstrate that even a simple 16-layer-deep wide residual network outperforms in accuracy and efficiency all previous deep residual networks, including thousand-layer-deep networks. We further show that WRNs achieve incredibly good results (e.g., achieving new state-of-the-art results on CIFAR-10, CIFAR-100, SVHN, COCO and substantial improvements on ImageNet) and train several times faster than pre-activation ResNets.

Update: We updated the paper with ImageNet, COCO and meanstd preprocessing CIFAR results. If you're comparing your method against WRN, please report correct preprocessing numbers because they give substantially different results.

tldr; ImageNet WRN-50-2-bottleneck (ResNet-50 with wider inner bottleneck 3x3 convolution) is significantly faster than ResNet-152 and has better accuracy; on CIFAR meanstd preprocessing (as in fb.resnet.torch) gives better results than ZCA whitening; on COCO wide ResNet with 34 layers outperforms even Inception-v4-based Fast-RCNN model in single model performance.

Test error (%, flip/translation augmentation, meanstd normalization, median of 5 runs) on CIFAR:

Network	CIFAR-10	CIFAR-100
pre-ResNet-164	5.46	24.33
pre-ResNet-1001	4.92	22.71
WRN-28-10	4.00	19.25
WRN-28-10-dropout	3.89	18.85

Single-time runs (meanstd normalization):

Dataset	network	test perf.
CIFAR-10	WRN-40-10-dropout	3.8%
CIFAR-100	WRN-40-10-dropout	18.3%
SVHN	WRN-16-8-dropout	1.54%
ImageNet (single crop)	WRN-50-2-bottleneck	21.9% top-1, 5.79% top-5
COCO-val5k (single model)	WRN-34-2	36 mAP

See http://arxiv.org/abs/1605.07146 for details.

bibtex:

@INPROCEEDINGS{Zagoruyko2016WRN,
    author = {Sergey Zagoruyko and Nikos Komodakis},
    title = {Wide Residual Networks},
    booktitle = {BMVC},
    year = {2016}}

Pretrained models

ImageNet

WRN-50-2-bottleneck (wider bottleneck), see pretrained for details
Download (263MB): https://yadi.sk/d/-8AWymOPyVZns

COCO

Coming

Installation

The code depends on Torch http://torch.ch. Follow instructions here and run:

luarocks install torchnet
luarocks install optnet
luarocks install iterm

For visualizing training curves we used ipython notebook with pandas and bokeh.

Usage

Dataset support

The code supports loading simple datasets in torch format. We provide the following:

• MNIST data preparation script
• CIFAR-10 [recommended] data preparation script, preprocessed data (176MB)
• CIFAR-10 whitened (using pylearn2) preprocessed dataset
• CIFAR-100 [recommended] data preparation script, preprocessed data (176MB)
• CIFAR-100 whitened (using pylearn2) preprocessed dataset
• SVHN data preparation script

To whiten CIFAR-10 and CIFAR-100 we used the following scripts https://github.com/lisa-lab/pylearn2/blob/master/pylearn2/scripts/datasets/make_cifar10_gcn_whitened.py and then converted to torch using https://gist.github.com/szagoruyko/ad2977e4b8dceb64c68ea07f6abf397b and npy to torch converter https://github.com/htwaijry/npy4th.

We are running ImageNet experiments and will update the paper and this repo soon.

Training

We provide several scripts for reproducing results in the paper. Below are several examples.

model=wide-resnet widen_factor=4 depth=40 ./scripts/train_cifar.sh

This will train WRN-40-4 on CIFAR-10 whitened (supposed to be in datasets folder). This network achieves about the same accuracy as ResNet-1001 and trains in 6 hours on a single Titan X. Log is saved to logs/wide-resnet_$RANDOM$RANDOM folder with json entries for each epoch and can be visualized with itorch/ipython later.

For reference we provide logs for this experiment and ipython notebook to visualize the results. After running it you should see these training curves:

Another example:

model=wide-resnet widen_factor=10 depth=28 dropout=0.3 dataset=./datasets/cifar100_whitened.t7 ./scripts/train_cifar.sh

This network achieves 20.0% error on CIFAR-100 in about a day on a single Titan X.

Multi-GPU is supported with nGPU=n parameter.

Other models

Additional models in this repo:

• NIN (7.4% on CIFAR-10 whitened)
• VGG (modified from cifar.torch, 6.3% on CIFAR-10 whitened)
• pre-activation ResNet (from https://github.com/KaimingHe/resnet-1k-layers)

Implementation details

The code evolved from https://github.com/szagoruyko/cifar.torch. To reduce memory usage we use @fmassa's optimize-net, which automatically shares output and gradient tensors between modules. This keeps memory usage below 4 Gb even for our best networks. Also, it can generate network graph plots as the one for WRN-16-2 in the end of this page.

Acknowledgements

We thank startup company VisionLabs and Eugenio Culurciello for giving us access to their clusters, without them ImageNet experiments wouldn't be possible. We also thank Adam Lerer and Sam Gross for helpful discussions. Work supported by EC project FP7-ICT-611145 ROBOSPECT.