Readline implementation in Rust that is based on Antirez' Linenoise
Supported Platforms
- Unix (tested on FreeBSD, Linux and macOS)
- Windows
- cmd.exe
- Powershell
Note:
- Powershell ISE is not supported, check issue #56
- Mintty (Cygwin/MinGW) is not supported
- Highlighting / Colors are not supported on Windows < Windows 10 except with ConEmu and
ColorMode::Forced
.
use rustyline::error::ReadlineError;
use rustyline::Editor;
fn main() {
// `()` can be used when no completer is required
let mut rl = Editor::<()>::new();
if rl.load_history("history.txt").is_err() {
println!("No previous history.");
}
loop {
let readline = rl.readline(">> ");
match readline {
Ok(line) => {
rl.add_history_entry(line.as_str());
println!("Line: {}", line);
},
Err(ReadlineError::Interrupted) => {
println!("CTRL-C");
break
},
Err(ReadlineError::Eof) => {
println!("CTRL-D");
break
},
Err(err) => {
println!("Error: {:?}", err);
break
}
}
}
rl.save_history("history.txt").unwrap();
}
You can use this package in your project by adding the following
to your Cargo.toml
:
[dependencies]
rustyline = "8.2.0"
- Unicode (UTF-8) (linenoise supports only ASCII)
- Word completion (linenoise supports only line completion)
- Filename completion
- History search (Searching for Commands in the History)
- Kill ring (Killing Commands)
- Multi line support (line wrapping)
- Word commands
- Hints
For all modes:
Keystroke | Action |
---|---|
Home | Move cursor to the beginning of line |
End | Move cursor to end of line |
Left | Move cursor one character left |
Right | Move cursor one character right |
Ctrl-C | Interrupt/Cancel edition |
Ctrl-D, Del | (if line is not empty) Delete character under cursor |
Ctrl-D | (if line is empty) End of File |
Ctrl-J, Ctrl-M, Enter | Finish the line entry |
Ctrl-R | Reverse Search history (Ctrl-S forward, Ctrl-G cancel) |
Ctrl-T | Transpose previous character with current character |
Ctrl-U | Delete from start of line to cursor |
Ctrl-V | Insert any special character without performing its associated action (#65) |
Ctrl-W | Delete word leading up to cursor (using white space as a word boundary) |
Ctrl-Y | Paste from Yank buffer |
Ctrl-Z | Suspend (Unix only) |
Ctrl-_ | Undo |
Keystroke | Action |
---|---|
Ctrl-A, Home | Move cursor to the beginning of line |
Ctrl-B, Left | Move cursor one character left |
Ctrl-E, End | Move cursor to end of line |
Ctrl-F, Right | Move cursor one character right |
Ctrl-H, Backspace | Delete character before cursor |
Ctrl-I, Tab | Next completion |
Ctrl-K | Delete from cursor to end of line |
Ctrl-L | Clear screen |
Ctrl-N, Down | Next match from history |
Ctrl-P, Up | Previous match from history |
Ctrl-X Ctrl-U | Undo |
Ctrl-Y | Paste from Yank buffer (Meta-Y to paste next yank instead) |
Meta-< | Move to first entry in history |
Meta-> | Move to last entry in history |
Meta-B, Alt-Left | Move cursor to previous word |
Meta-C | Capitalize the current word |
Meta-D | Delete forwards one word |
Meta-F, Alt-Right | Move cursor to next word |
Meta-L | Lower-case the next word |
Meta-T | Transpose words |
Meta-U | Upper-case the next word |
Meta-Y | See Ctrl-Y |
Meta-Backspace | Kill from the start of the current word, or, if between words, to the start of the previous word |
Meta-0, 1, ..., - | Specify the digit to the argument. โ starts a negative argument. |
Readline Emacs Editing Mode Cheat Sheet
Keystroke | Action |
---|---|
$, End | Move cursor to end of line |
. | Redo the last text modification |
; | Redo the last character finding command |
, | Redo the last character finding command in opposite direction |
0, Home | Move cursor to the beginning of line |
^ | Move to the first non-blank character of line |
a | Insert after cursor |
A | Insert at the end of line |
b | Move one word or token left |
B | Move one non-blank word left |
c | Change text of a movement command |
C | Change text to the end of line (equivalent to c$) |
d | Delete text of a movement command |
D, Ctrl-K | Delete to the end of the line |
e | Move to the end of the current word |
E | Move to the end of the current non-blank word |
f | Move right to the next occurrence of char |
F | Move left to the previous occurrence of char |
h, Ctrl-H, Backspace | Move one character left |
l, Space | Move one character right |
Ctrl-L | Clear screen |
i | Insert before cursor |
I | Insert at the beginning of line |
+, j, Ctrl-N | Move forward one command in history |
-, k, Ctrl-P | Move backward one command in history |
p | Insert the yanked text at the cursor (paste) |
P | Insert the yanked text before the cursor |
r | Replaces a single character under the cursor (without leaving command mode) |
s | Delete a single character under the cursor and enter input mode |
S | Change current line (equivalent to 0c$) |
t | Move right to the next occurrence of char , then one char backward |
T | Move left to the previous occurrence of char , then one char forward |
u | Undo |
w | Move one word or token right |
W | Move one non-blank word right |
x | Delete a single character under the cursor |
X | Delete a character before the cursor |
y | Yank a movement into buffer (copy) |
Keystroke | Action |
---|---|
Ctrl-H, Backspace | Delete character before cursor |
Ctrl-I, Tab | Next completion |
Esc | Switch to command mode |
Readline vi Editing Mode Cheat Sheet
$ cargo run --example example --target 'x86_64-pc-windows-gnu'
...
Error: Io(Error { repr: Os { code: 6, message: "Invalid handle." } })
$ wineconsole --backend=curses target/x86_64-pc-windows-gnu/debug/examples/example.exe
...
$ # current settings of all terminal attributes:
$ stty -a
$ # key bindings:
$ bind -p
$ # print out a terminfo description:
$ infocmp
Library | Lang | OS | Term | Unicode | History | Completion | Keymap | Kill Ring | Undo | Colors | Hint/Auto suggest |
---|---|---|---|---|---|---|---|---|---|---|---|
go-prompt | Go | Ux/win | ANSI | Yes | Yes | any | Emacs/prog | No | No | Yes | Yes |
Haskeline | Haskell | Ux/Win | Any | Yes | Yes | any | Emacs/vi/conf | Yes | Yes | ? | ? |
linefeed | Rust | Ux/Win | Any | Yes | any | Emacs/conf | Yes | No | ? | No | |
linenoise | C | Ux | ANSI | No | Yes | only line | Emacs | No | No | Ux | Yes |
linenoise-ng | C | Ux/Win | ANSI | Yes | Yes | only line | Emacs | Yes | No | ? | ? |
Liner | Rust | Ux | ANSI | No inc search | only word | Emacs/vi/prog | No | Yes | Ux | History based | |
prompt_toolkit | Python | Ux/Win | ANSI | Yes | Yes | any | Emacs/vi/conf | Yes | Yes | Ux/Win | Yes |
rb-readline | Ruby | Ux/Win | ANSI | Yes | Yes | only word | Emacs/vi/conf | Yes | Yes | ? | No |
replxx | C/C++ | Ux/Win | ANSI | Yes | Yes | only line | Emacs | Yes | No | Ux/Win | Yes |
Rustyline | Rust | Ux/Win | ANSI | Yes | Yes | any | Emacs/vi/bind | Yes | Yes | Ux/Win 10+ | Yes |
termwiz | Rust | Ux/Win | Any | ? | Yes | any | Emacs | No | No | Ux/Win | No |
This is a very simple feature that simply causes lines that are longer than the current terminal width to be displayed on the next visual line instead of horizontally scrolling as more characters are typed. Currently this feature is always enabled and there is no configuration option to disable it.
This feature does not allow the end user to hit a special key sequence and enter a mode where hitting the return key will cause a literal newline to be added to the input buffer.
The way to achieve multi-line editing is to implement the Validator
trait.