cstroie Goto Github PK

ka-radio32

esp32 version of Ka-Radio (https://github.com/karawin/Ka-Radio) by jp Cocatrix

m590

A TCP client library for the M590 GPRS modem

matrixchronograph

A deck clock using 3 8x8 led matrix modules

micromill

Arduino nano or similar cnc firmware for 28BYJ-48-5 unipolar steppers driven by ULN2003

micromodemgp

General purpose firmware for MicroModem with forward error correction and larger packet sizes

microwspr

Arduino Micro GPS-discplined WSPR beacon

monitorix

Monitorix is a free, open source, lightweight system monitoring tool.

mqtt-433

This program enables to: - receive MQTT data from a topic and send RF 433Mhz signal corresponding to the received MQTT data - publish MQTT data to a different topic related to received 433Mhz signal

nanoio

Amateur Radio FSK/CW interface Arduino sketch for nano board

nematoduino

Arduino UNO-compatible robotic simulation of the C. elegans nematode

netchronograph

NTP-synchronized 7-segment LED clock

nsa310-kernel

Linux kernel for ZyXEL NSA310

openmqttgateway

MQTT gateway for ESP8266 or Arduino with bidirectional 433mhz/315mhz & Infrared communications & beacons detection . Previously 433toMQTTto433

pip

Pip is a NodeMCU based ambient and weather reporter

planespotter

rdz_ttgo_sonde

readthedocs.org

source code to readthedocs.org

robomitzy

RoboMitzy is a small, but high performance, line following robot.

rrdcollect-remote

Collect rrdcollect output from several hosts to update local RRD files

rshot

Rotating Snapshot

runcpm

RunCPM is a multi-platform, portable, Z80 CP/M 2.2 emulator.

scott

Scientific RPN Calculator with OLED display and ATTINY85

simpledht

Simple, Stable and Fast Arduino Temp & Humidity Sensors for DHT11 and DHT22. http://learn.adafruit.com/dht

tasmota

Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at

tinymultimediacontroller

Multimedia controller using an Digispark Attiny85 and a rotary encoder

unigrbl

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino. Suport for unipolar stepper motors.

usdx

Simple and experimental (class-E driven) SSB transceiver.

weather-forecast

A CLI weather-forecast using unicode weather chars as output. Usefull for i3 status bar.

wips

An APRS tracker using MLS based on WiFi.

wxmonitor

Weather Monitor