cynixx3 / third-party-miner-installer-for-ethos

Single command Instructions to fully integrate unsupported miners into ethOS ethosdistro, and examples for miner developers to add their own integrations. Over 30 new or updated miners.

Miner Manager for ethOS

This OFFICIAL miner manager will install, update, or revert these miners to ethOS version 1.3.3

These instructions were written for the average NON linux PC user (thats you!)

These instructions were written for the average NON linux PC user (thats you!)

Estimated read time: 10 minutes (Jump to TL:DR)

List of currently supported miners

key

• ✔️ = Fully integrated into ethOS for configuration and hash reporting.
• ❌ = Only miner program is included and may not be able to be configured or report hash with ethOS. You will need to run the miner manually in /opt/miners/MINERNAME and monitor it with your * own solution.
• 🚀 = Miner programs are downloaded directly from developers release source. You can update as soon as the developer releases the miner.
• 🔗 = We link to the miner program version directly, either from the developers source or this repo. You can update when we update the link to the new version.
• 🐌 = We had to compile these miners from code to work on ethOS using the miner-builder. You can update only after we compile and link the new version.

Fully Integrated into ethOS	Update Path	Supported Hardware	Miner Program (click name to get miner specific information)	Algorithm	DevFee
✔️	🔗 16.3.0	AMD NVIDIA	bminer	Equihash, EtHash, Blake, Bytom, Grin	0.65% - 2%
✔️	🔗 v1.7.1	AMD	cast-xmr	CryptoNight	1%
✔️	🐌 v2.3.1	NVIDIA	ccminer	Sia, NeoScrypt, x16, and more	0%
❌	🐌 1.3.1	NVIDIA	ccminer-Zcoin	Zcoin	0%
✔️	🔗 v15.0	AMD NVIDIA	claymore	EtHash	1% (0% for < 3gb GPU)
✔️	🚀	NVIDIA	cryptodredge	Chukwa, CryptoLightV7, Lyra2zz, MTP, X16RV2, and more	1% (2% for MTP)
✔️	🐌 v2.2.1	AMD NVIDIA	energiminer	Energi NRG	0%
✔️	🐌 v18.0	AMD NVIDIA	ethminer	EtHash	0%
✔️	🚀	AMD NVIDIA	gminer	AE, BFC, Grin, EtHash, KAWPOW, and more	0.65% - 5%
❌	🚀	AMD NVIDIA	gringoldminer	Grin (discontinued miner only, run manually in /opt/miners/gringoldminer/)	1%
✔️	🐌 v3.0.0	NVIDIA	grin-miner	Grin (AMD limited to a single GPU)	0%
✔️	🔗 v1.2	AMD NVIDIA	grinpro	Grin	2%
✔️	🚀	AMD NVIDIA	kbminer	Grin, AE, VDS	1% AE - 2% Grin
✔️	🚀	AMD NVIDIA	lolminer	Equihash, Beam & Grin	1%
✔️	🔗 v1.6v5	NVIDIA	miniz	Equihash	2%
✔️	🚀	AMD NVIDIA	nanominer	ETH, ETC, UBQ, RVN, CFX, ERG, XMR, VRSC	1% - 2.5%
✔️	🚀	AMD NVIDIA	nbminer	CKB, Grin, AE, Sero, SIPC, BFC, BTM, ETH, SWAP	0.65% - 3%
✔️	🚀	AMD CPU NVIDIA	ninjarig	Argon2 (Turtle Coin)	1% - 5% (configurable)
❌	🚀	NVIDIA	nodecore-pow-cuda-miner	VeriBlock (miner only, run manually in /opt/miners/nodecore-pow-cuda-miner/)	0%
❌	🐌 v2.0a	AMD NVIDIA	nodecore-pow-amd-cuda-miner	VeriBlock (miner only, run manually in /opt/miners/nodecore-pow-amd-cuda-miner/)	0%
✔️	🔗 v6.1b	AMD NVIDIA	phoenixminer	EtHash	0.65% - 0.9% (dual)
✔️	🚀	AMD CPU NVIDIA	soliditysha3miner	SHA3 EIP918 tokens	2% (1.5% min configurable)
✔️	🚀	AMD	teamredminer	EtHash, CryptoNight, x16rv2, MTP, Lyra2z and more	0.75% - 3%
✔️	🚀	NVIDIA	t-rex	x16rv2, MTP, Lyra2z, timetravel, and more	1% (3% for Tensority)
✔️	🚀	AMD NVIDIA	ubqminer	Ethereum based Ubiq	0%
✔️	🚀	AMD	wildrig-multi	x16rv2, Squa, MTP, MTP-TCR, timetravel, and more	2% (optional flag change)
✔️	🐌 v1	AMD CPU NVIDIA	xcash-all	XCash	0%
❌	🐌 v1	AMD	xcash-amd	Xcash (miner only, run manually in /opt/miners/xcash-amd/)	0%
✔️	🚀	AMD CPU NVIDIA	xmrig	CryptoNight, RandomX and Argon2	5%
✔️	🚀	AMD	xmrig-amd	cryptonight, cryptonight-light, cryptonight-heavy	5% (optional flag change 1% lowest)
✔️	🐌 v2.10.8	AMD CPU NVIDIA	xmr-stak	CryptoNight and 10+ varients	2%
❌	🚀	AMD CPU NVIDIA	xmr-stak-rx	RandomX	0%
❌	🚀	NVIDIA	zilminer	Ethereum based Zilliqa (miner only, run manually in /opt/miners/zilminer/)	0%

ONLY ONE ADDITIONAL MINER CAN BE INSTALLED AT A TIME

ethOS files are overwritten for the installation of each miner even though miners can be left in place with (update). Some miner dependencies will prevent other miners from starting you can completely uninstall a miner using the information here.

Getting Started

Following these instructions will install the chosen miner and its integration files on your ethOS machine. Each miner integration is stored in a branch of github for you to review.

You can get assistance through the support team here: http://ethosdistro.com/kb/#support

Prerequisites

You need to be running ethos 1.3.3 to install a miner with this script.

Installing the miners

This script was designed for ease of use. You can run a single command to install, update, or remove any miner on this repo and any dependencies with it.

Below are instructions to install the miner-manager script if you think you will use it often, or you can skip installing the manager and just run the script from the github repo in which case the command would look like NON WORKING EXAMPLE

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) miner action

NOTICE: YOU SET THE LAST TWO WORDS to what you want to do. Where the miner is the name of the miner branch in this repo and the actions are install, update, or revert IE for a full install of phoenixminer example or an update of all files run:

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) phoenixminer install

Updating

The miner can be easily updated when new releases are out by just changing the action argument to "update" IE to only update the energiminer example program to the latest release run:

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) energiminer update

UnInstalling

The miner can be easily uninstalled by changing the action argument to "revert" IE to uninstall wildrig-multi example run:

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) wildrig-multi revert

Downgrading / Version selection

The miner-manager can downgrade a miner by adding a third argument, this works for both the install and update arguments

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) phoenixminer update 4.5c

Or allow you to select a specific version

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) xmr-stak install amd

Where xmr-stak has a cpu version by default but you can select amd or nvidia.

xmr-stak-rx-linux-1.0.1-cpu.tar.xz
xmr-stak-rx-linux-1.0.1-cpu_cuda-nvidia.tar.xz
xmr-stak-rx-linux-1.0.1-cpu_opencl-amd.tar.xz

Or allow you to downgrade and select a specific version by being more specific.

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) xmr-stak update 1.0.0-cpu_opencl-amd

ethOS Config Sample

Here is an example of how to add phoenixminer to ethos. These instructions will apply to ANY miner simply by changing "phoenixminer" to the miner you want.

Set the miner

You can use the miner on your local config or globally on a remote config

globalminer phoenixminer

OR in a remote config to set just one rig

miner c94e13 phoenixminer

Where c94e13 is your EthOS rig hostname. You can get your miners hostname by running the terminal command hostname

Set your pool and wallet

for local configs or remote configs to apply globally use

proxywallet walletORusername
proxypool1 pool.com:port
proxypool2 pool.com:port
poolpass1 x
poolpass2 x

OR to make it specific to this miner program in a remote config

phoenixminer=proxywallet walletORusername
phoenixminer=proxypool1 pool.com:port
phoenixminer=proxypool2 pool.com:port
phoenixminer=poolpass1 x
phoenixminer=poolpass2 x

OR to make it specific to this rig

rigwallet c94e13 walletORusername
rigpool1 c94e13 pool.com:port
rigpool2 c94e13 pool.com:port
rigpoolpass1 c94e13 x
rigpoolpass2 c94e13 x

NOTES: Some miners allow you to use a single cpu thread, for these you can set

globalminer ubqminer-single

Some miners depend on a fallback pool, others do not use them. Best practice is to set both pools to avoid errors.

Manual config sample

ethOS requires several file changes in order to intergrate a miner into its config and hash reporting features, when this code has not been created you can manually run a miner. In this example we will use grinpro, but you can suppliment it with the miner of your choosing.

First stop ethOS from trying to manage a miner, run disallow && minestop, then go to the miner folder cd /opt/miners/grinpro and run the miner ./GrinProMiner to check that its working and to make any firt run configurations. This process will close when you disconnect from ssh and it will not start with ethOS. Exit the miner with the key combination ctrl+c

Once you get the miner to run and know the start command in order to mine add it to custom.sh nano guide

nano /home/ethos/custom.sh

Add the following line with the information you discovered, above "exit 0" (you can also start the miner with this command)

screen -dmS miner /opt/miners/grinpro/GrinProMiner ignore-config=true stratum-address=eu-west-stratum.grinmint.com stratum-port=4416 stratum-tls=true [email protected] nvidia=0 amd=0:0 2>&1 /var/run/ethos/miner.output

The 2>&1 /var/run/ethos/miner.output allows you to use show miner even in manual mode. Add any miner flags just as your pool or miner instructs. That's all you need to do.

About screen

Screen is a linux program that runs an interactive terminal session that you can run independently, connect, and disconnect from. To connect to the miner session and interact with it use

screen -x

To disconnect from a screen session without killing the miner use the key combination ctrl+a d where you press ctrl and a the same time, release, then press d. Using the ctrl+c key combination will kill the miner, not the screen session and create an interesting situation where rebooting is the easiest fix (alternative is ctrl+a k y, checking for live sessions with screen -ls and killing them if found, then restarting the miner with the screen -dmS ... command above.)

Installing the miner-manager (optional) (This does not install a miner, just the script)

If you plan to use this often you can download the miner-manager script and give it execute permissions. To install simply copy paste the command:

sudo wget https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager -O /usr/bin/miner-manager
sudo chmod +x /usr/bin/miner-manager

When installed you can use it with miner-manager miner action instead of the larger bash <(curl ... commands above. To update the manager script just repeat the first command.

Farms

You are limited to installing 30 miners an hour as this script makes 2 API querries per install. With authenticated requests you get enough to install on 2,500 miners per hour per user.

See GitHub API Documentation for more information.

To authenticate, either use a file (/home/ethos/.gituser) or use the variables after installing the miner-manager. These environmental variables are currently:

• GITHUB_USERNAME
• GITHUB_PASSWORD

An example file is in this repository but is not installed by default.

You must use a valid github.com user for this.

It is recommended to use your Personal Access Token as the GITHUB_PASSWORD for your privacy over https. You can get a PAT from GitHub by going to the User Icon in the upper right corner > Settings > Developer Options > Personal access token > "Generate new token" button > Note "miner-manager" > select Scope of "read:packages" > Generate token. You can now use this token as your GITHUB_PASSWORD in .gituser or the miner-manager file directly. If you loose the token just delete the current PAT and make a new one.

Development

If you are a developer please check the developers guide for information on how to add your miner to ethos and this repo.

Contributing

Any setting changes to the miner-manager (like an updated release) should be made to the miner.settings file in each miners branch of this repo.

If you got a new miner working using these tools or just improved an intergration please submit a pull request with a new branch for the miner you added.

Authors

• cYnIxX3 - Initial work - cYnIxX3 <== MVP

~ If you found this script useful please donate to encourage more development (every coin helps):
~ BTC bc1qk5mgs5tcm00287vapxupj5x4wqguhqr5qrmu8k
~ ETH 0x456ba7b1e9758c4c6fc56007107796f08ffba12b
~ XMR 44tLr5hm5g3LJnpy5HGK2hDADofwPXcPvCd1CF67q5NdavbiZuFKasWja1vCGpapDyfWXcqH49FWm6XkvJSfQ3Vh4TQ8oy3
~ LTC LP7iuax4k57EC8GYo1inNMeqAVJ63mMrAc
~ Zcash Zcash t1YzbApi36dftoP2tchEzpZpDkLTM1XkNSq

Contributors

• unsivil - added and integrated several miners - unsivilaudio
• Kahlid74 - added cryptodredge - Phaelon74
• virusHQ - ported ubqminer - virusHQ
• amnesium - ported grin-miner - amnesium
• asluchevskiy - ported t-rex - asluchevskiy
• Virosa - improved grin-miner, added bminer - Virosa
• HTCang - ported gminer - HTCang

License

This project is licensed under the MIT License - see the LICENSE.md file for details

TL;DR

Step 1: To just install Phoenixminer on your rig Run in the terminal:

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) phoenixminer install

Step 2: Edit your config to match the miner you installed above:

globalminer phoenixminer

You're Done

third-party-miner-installer-for-ethos's Issues

How to set gt value on ethos phenixminer?

Flags -gt not working

Thanks

Claymore Needs Update to v15.0

After ETH Dag #299 Claymore v14.9 and under will no longer work.

Currently we are sitting at #298 which is already causing issues on my miners allocating the DAG file on 8GB cards so I would guess others are having or will be having issues.

Adding randomx GPU miner

Can you add this miner?

https://github.com/SChernykh/RandomX_OpenCL/releases/tag/v1.0.4-2

LOLMINER 1.01 Can`t start after update

unrecognised option '--usercfg'
+---------------------------------------------------------+
| _ _ __ __ _ _ ___ _ |
| | | ___ | | / () __ ___ _ __ / | / _ / | |
| | |/ _ | | |/| | | '_ \ / _ \ '| | || | | | | |
| | | () | | | | | | | | | __/ | | || || | | |
| |_|_/||| |||| ||_|| |()/|_| |
| |
| This software is for mining |
| Equihash 144/5, 192/7, 210/9 |
| BeamHash I (EquihashR 150/5/0) |
| BeamHash II (EquihashR 150/5/3) |
| BeamHash III |
| ZelHash (EquihashR 125/4/0) |
| CuckarooD 29 |
| CuckarooM 29 |
| Cuckaroo 30 CTX |
| Cuckatoo 31/32 |
| |
| |
| Made by Lolliedieb, June 2020 |
+---------------------------------------------------------+
Error: Neither --coin nor --algo nor --benchmark specified.
lolMiner does not know what to do ;)
Use -h to get a list of valid parameters. Closing now.

how to dualminer Ethereum - blake2s on phoenixminer in ethos again.

i try

globalminer phoenixminer
maxgputemp 80
stratumproxy enabled
proxywallet 0xc85a21D50313d1753f75695dDe50BC355aEAD374
proxypool1 ssl://asia1.ethermine.org:5555
#proxypool2 us1.ethermine.org:4444
flags -proto 3
globalfan 85
dualminer enabled
dualminer-coin blake2s
dualminer-pool blake2s.usa.nicehash.com:3361
dualminer-wallet 1CvL6uBnAWLbTsg2PR1kMoNH5JKM1r6Tgz

but not work

Eth speed: 151.404 MH/s, shares: 3/0/0, time: 0:01
GPUs: 1: 24.506 MH/s (0) 2: 27.170 MH/s (0) 3: 22.635 MH/s (0) 4: 24.587 MH/s (0) 5: 24.492 MH/s (0) 6: 28.016 MH/s (3)
B2S speed: 0.000 MH/s, shares: 0/0/0
GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0) 6: 0.000 MH/s (0)

can you suggest?

T-rex miner Error download

Problem With Ethos:
10:46 AM ethos@2627f5 192.168.1.180 [409.0 hash] /home/ethos $ sudo miner-manager t-rex update
Wed Oct 6 10:53:05 CEST 2021
/usr/bin/miner-manager: line 42: [: : integer expression expected
Move to a temporary work space
Download failed. Please check your firewall or git access and try again.

Unable to update T-rex miner

Miniz 1.4o

When you will update miniZ to 1.4o, in hash-monitor, the correct field to get the individual gpu hash seems to be f8.

tail -50 /var/run/miner.output | grep "0>" | cut -d '' -f2 | sed 's/[)*(]/ /g' | cut -d' ' -f8 | tail -1

File on launchpad.net not found

--2020-09-23 03:10:23-- https://launchpad.net/~ubuntu-toolchain-r/+archive/ubuntu/test/+build/14981774/+files/gcc-8-base_8.1.0-5ubuntu1~14.04_amd64.deb
Resolving launchpad.net (launchpad.net)... 91.189.89.222, 91.189.89.223, 2001:67c:1560:8003::8004, ...
Connecting to launchpad.net (launchpad.net)|91.189.89.222|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-09-23 03:10:24 ERROR 404: Not Found.

(Nvidia) xmrig no libxmrig-cuda.so

Running bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) xmrig install nvidia
Starting xming.
Error: xmrig failed to load CUDA plugin
File libxmrig-cuda.so not in the system.

p.s. p. s. xmr-stak does not have this problem.

miner-manager missing t-rex install

t-rex i missing on this package?

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) t-rex install
Thu May  6 21:14:03 CEST 2021
/dev/fd/63: line 42: [: : integer expression expected
Move to a temporary work space
Getting latest release of miner
Download failed. Please check your firewall or git access and try again.

Problem

t-rex is missing on list of url get miners to install:
https://api.github.com/repos/cynixx3/third-party-miner-installer-for-ethos/releases?per_page=100

My solution

Download miner-manager

wget -O /home/ethos/miner-manager.sh https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager

Edit miner-manager.sh:

nano miner-manager.sh

Go to line 75 and add this line:

 DOWNLOAD_URL="https://trex-miner.com/download/t-rex-0.20.3-linux.tar.gz"
 COMPRESSION=$(echo "$DOWNLOAD_URL" | grep -oP 't[argxb.]{1,4}z2?$')

You can find lastest url binaries on https://bitcointalk.org/index.php?topic=4432704.msg39576609#msg39576609

Set permissions to this file:

chmod +x miner-manager.sh

Install t-rex

bash miner-manager.sh t-rex install

Linux TeamRedMiner update installs armhf version

When attempting to update TeamRedMiner on Linux, the linux-armhf version is installed instead of the regular linux version.

When I passed the download URL via DOWNLOAD_URL, the correct version was installed:

DOWNLOAD_URL=https://github.com/todxx/teamredminer/releases/download/v0.10.7/teamredminer-v0.10.7-linux.tgz ./miner-manager teamredminer update

It looks like armhf was added as of v0.10.1 and it appears before the regular linux release, so it gets parsed first.

Phoenix Miner Switching to epools.txt

Hello there, after testing the script and the Phoenix Miner for a bit, I realized that the Phoenix miner gets pool and wallet address data from both epools.txt and the local/remote configuration. Which actually causes problems if your main pool is down, and you don't have a secondary pool configured. Or even in some cases, if two pools are configured but they are both down, the miner switches to the default pool / wallet that was specified at the epools.txt located at /opt/miners/phoenixminer

It took me couple hours to realize that the miner was not mining the dev fee, but actually switched to some other pool. After restarting it, I saw the message "4 pools specified (2 from terminal)" I understood this was the problem.

Please either make the script delete the epool.txt after installing the Phoenix Miner, or, by some extra command, make sure that the two lines (which are defining those 2 extra wallet adresses) are dashed out.

bminer

How to Integrate Bminer ?
I am able to install it via the miner-manager but need to run in manually , not having stats seen by ethos.
Would need some help here if possbile

running bminer -uri .... 2>&1 /var/run/miner.output to have at least the show miner running.
so not fully integrated !

If setting local.conf (yes using local)
to:
globalminer gminer & Settings its falling back to ethminer

T-REX missing parameter

Team T-Rex deprecated -J

parse error: Argument: -J

20211105 11:32:11 T-Rex finished.
20211105 11:32:15 ERROR: Can't start T-Rex,

BUT Ethos not work without -J command

gminer with cokucoo29 error

when mine grin in sparkpool ,worker and wallet should link with '/' but you use '.'
for example : [email protected]/rig-123
Not --user [email protected]

miner-manager miner version installed/avaible

Hi,
on a simple miner-manager command can you show what version of miners do you install ?

miner-manager
Wrong number of arguments, must be 2 arguments miner and action, please refer to https://github.com/cynixx3/third-party-miner-installer-for-ethos
Usage /usr/bin/miner-manager [ Miner ] ( install | update | revert )

Miners Available:
bminer VERSION avaible for install
cast-xmr
cryptodredge
energiminer
grin-miner
gringoldminer
grinpro
lolminer
nbminer
nodecore-pow-amd-cuda-miner
nodecore-pow-cuda-miner
phoenixminer
soliditysha3miner
t-rex
teamredminer
ubqminer
wildrig-multi
xmr-stak
xmrig-amd
zilminer

I am getting an error "Permission denied"

Hi, I have 3 rx470 4gb in my rig, I have been using your miner on ethos for 1 month, there was no error on usb installation, but today I changed my installation to ssd and repeated all steps in same way, but now I am getting an error.
Cannot exec '/opt/miners/phoenixminer/PhoenixMiner': Permisiion denied
I tried to chmod things.. but it doesn't work. What should I do.?

Also I want to add something that the folder name was different than PhoenixMiner at the first place,(something like PhoenixMiner_5 tar gz...) at that time I got another error that "No such file" then I changed name to PhoenixMiner.

how to dualminer Ethereum - blake2s on phoenixminer in ethos

can you sample config?

miner-installer is failing to download release for ethminer

Hello,

There is no valid instance for 'ethminer' release in

https://api.github.com/repos/cynixx3/third-party-miner-installer-for-ethos/releases

As a result, miner-installer failing to find, download and install/update ethminer.

D.

bminer error

Updated to version 15.7.1, Bminer has hash but rejects it all.

Phoenixminer download error

Download failed. Please check your firewall or git access and try again.

--- I think the download url not working.

can't install ethminer

I am trying to install ethminer but get the next error:

root@29310b 192.168.88.109 [130.5 hash] /opt/miners/ethminer bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) ethminer install Fri Feb 5 09:13:32 CST 2021 /dev/fd/63: line 42: [: : integer expression expected Move to a temporary work space Getting latest release of miner Download failed. Please check your firewall or git access and try again.

rvn mine don't work after install t-rex

Typo in DEVELOPERS.md

third-party-miner-installer-for-ethos/DEVELOPERS.md

Line 65 in 200eda5

6. `git comit -am "initial comit"

comit
should be
commit

Miniz bad hashrate

in hash-monitor, it should be:
tail -50 /var/run/miner.output | grep "$i>" | tr '' ' ' | tail -1 | cut -d ' ' -f10
instead of
tail -50 /var/run/miner.output | grep "$i>" | tr '' ' ' | tail -1 | cut -d ' ' -f12

i think

Nanominer

Hello! Nanominer is not working and how to change the algo configuration in config? Thx for help

lolMiner --profile

Hi, it seems that the line for lolMiner is not correctly.

The parameter profile must use 2 -, --profile and now is passed with only 1- that makes a confusion take the -p parameter of the pool instead profile.

Could you please upgrade it?.

Many thanks

XPM Miner

Please integrate xpmminer.

http://xpmforall.org
http://coinsforall.io/distr/xpmclient-opencl-10.3-linux.tar.gz
http://coinsforall.io/distr/xpmclient-cuda-10.3-linux.tar.gz

[type] loc not working

Hi @cynixx3 when i install bminer the loc option not work

source <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) bminer install

[type] [worker] [value]

------------------------------------------------------

loc c94e13 MyMinerName

on pool site show c94e13 , is possible fix this issue ?

when i delete bminer

source <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) bminer revert

loc option work again....

Great Job !!!!
Really very thanks for "third-party-miner"

phoenix miner update

how to update phoenix miner 5.4b in ethOS ??

I can't update ethminer, get download failed

I can't update ethminer, get download failed, any idea?

10:09 AM root@aabcds 192.168.1.101 [322.4 hash] /opt/ethos/bin # bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) ethminer update Tue Feb 9 10:09:21 CST 2021 /dev/fd/63: line 42: [: : integer expression expected Move to a temporary work space Getting latest release of miner Download failed. Please check your firewall or git access and try again.

lolminer hash-monitor

there is a bug in the hash-monitor for lolminer. It connects to api on port 42000, but the correct port is 42043