dadamachines / usbh_midi_samd

USB Host MIDI for Arduino SAMD boards

usbh_midi_samd

USB Host MIDI for Arduino SAMD boards

usbh_midi_samd is the USBH_MIDI driver from the USB Host Shield 2.0 project to the ArduinoCore-samd project. Most of the time was spent fixing bulk in/out pipes. A USB OTG to host cable or adapter is required.

The driver has been tested minimally on an Arduino Zero but it should work on other boards based on the SAMD family. For example, the driver works on an Adafruit Trinket M0.

Changes are needed to the following ArduinoCore-samd files:

• cores/arduino/USB/samd21_host.c
• libraries/USBHost/src/address.h
• libraries/USBHost/src/Usb.cpp

NOTE: To successfully compile the project don't keep backup files of the original files in the same folder.

All of the USBH_MIDI files require trivial renaming changes.

By the way, the fix described in arduino/ArduinoCore-samd#271 is included.