danielsnider / mapviz-tile-map-google-maps-satellite Goto Github PK
View Code? Open in Web Editor NEWROS Offline Google Maps for MapViz
ROS Offline Google Maps for MapViz
Hi, I am really new in Mapviz and Mapproxy, I am doing a project related with self-driving car that requires GPS. I plan on using Google Maps to based my project on. I look unto your documentation and it says it works on ROS Foxy right now. I was wondering where I did wrong since I can't show my Mapproxy data on Mapviz. Here attached is the output in both Mapproxy and Mapviz. Fyi, the Mapviz launch file was not able to be succesfully launched as well, and i was wondering might that be the cause of the problem? Thanks!!
Hi, I'm really delighted to know that there is a tool to download map files while using mapviz. But when I run the commands: docker run -p 8080:8080 -v ~/mapproxy:/mapproxy -d -t danielsnider/mapproxy
I got the error:
docker: Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?.
See 'docker run --help'.
I never use docker before, and I have tried to run this comman as root and I have also tried to run:
eval "$(docker-machine env default)"
but it still doesn't work, can you help me to fix this problem? Thx a lot
Hello everyone, this repo is such a fantastic job.
I successfully showed the tile map of Google Maps, and the navsat track, as in the image attached:
But the view does not move as the gps track goes. As in this: MapViz clip
How to do it?
Thank you all.
Great work! I was able to show the google map on my mapviz and it worked even when offline if I cached the images. However, I have problem showing the GPS data (/gps/fix, /gps/filtered, etc....) on the map. It only shows the first location, and then refuses to update when I move my robot. It shows correctly when I use other maps. Do you have an idea what might be the problem?
While clicking http://localhost:8080/wmts/gm_layer/gm_grid/0/0/0.png link as mentioned in the link I am getting an wired error
<ows:ExceptionReport xmlns:ows="http://www.opengis.net/ows/1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/ows/1.1 http://schemas.opengis.net/ows/1.1.0/owsExceptionReport.xsd" version="1.0.0" xml:lang="en">
<ows:Exception exceptionCode="NoApplicableCode">
ows:ExceptionText
No response from URL "http://mt0.google.com/vt/lyrs=s@0&hl=en&x=0&y=0&z=0": Name or service not known
</ows:ExceptionText>
</ows:Exception>
</ows:ExceptionReport>
any idea what could be the possible reason
Hi danielsnider, I encountered a problem similar to rocklinsuv:, ,but I cannot use the same steps to solve the problem.
When I tried to run "sudo docker run -p 8080:8080 -d -t -v ~/mapproxy:/mapproxy danielsnider/mapproxy", it initially downloaded the docker image, and then returned a series of numbers and characters for the second time. For example, "5d23e78...". Then I checked the MapProxy demo http://127.0.0.1:8080/demo, but I could not get the picture of the map when I opened the webpage normally. I also currently live in a country without Google.. (><) Is there a solution to use topographic maps instead of Google Maps instead of WTMS?
Hi danielsnider,
I've been trying to get MapViz running along with MapProxy according to your tutorial. When I tried to run "sudo docker run -p 8080:8080 -d -t -v ~/mapproxy:/mapproxy danielsnider/mapproxy", it initially downloaded the docker image, then the second time returned a chain of numbers and characters like "5d23e78.......". I then check the MapProxy demo http://127.0.0.1:8080/demo but nothing happened. So I would like to know if we need to install MapProxy individually before using the docker image? I would also like to know what is the code used for from this url: https://github.com/danielsnider/docker-mapproxy-googlemaps. Do I need to download it and use it along with docker?
Another issue will be I'm currently living in a country without Google (sucks). Is there an alternative WTMS with terrain maps rather than Google Maps? Any thoughts will be very much appreciated!
Best Regards,
rocklinsuv
Hi, @danielsnider
Thank you for your tool. I'm using your tool and find an issue. I'm very appreciate if you could give me some advice.
After followed your instructions, I had set up the docker. I could see the map on both http://localhost:8080/wmts/gm_layer/gm_grid/0/0/0.png
and
http://127.0.0.1:8080/demo/ .
But, when I added the tile map in the mapviz and click the "save" button, the status change to OK but I could not see the map loaded in mapviz. I tried to re-launch the mapviz. There was still nothing but some ERROR in the terminator like below.
[7f2541e72880] [/mapviz_pj_18058_202514917221692565/ImageCache::NetworkError:251]: NETWORK ERROR
[7f2541e72880] [/mapviz_pj_18058_202514917221692565/ImageCache::NetworkError:251]: NETWORK ERROR
[7f2541e72880] [/mapviz_pj_18058_202514917221692565/ImageCache::NetworkError:251]: NETWORK ERROR
[7f2541e72880] [/mapviz_pj_18058_202514917221692565/ImageCache::NetworkError:251]: NETWORK ERROR
Have you ever met this issue before? I'm struggled with it for a long time. That is very nice if you could give me a hand. Thank you very much.
Best, wishes
Hi @danielsnider ,
Thank you for your work. I try to use you docker to load map to mapviz but can't get it to work.
I followed your instruction. I was able to add a map_tile component and save. But the status always shows "no tranform from /wgs84". I run a rosbag and it said that "Got NavSat message. Setting origin and unsubscribing from NavSat." However, nothing is shown. If I tried to add a gps (using the add button), mapviz crashes.
I am really confused about how to run mapviz (I did read through every recommended issues but still got stuck) so if you could help me with a walkthrough from the very beginning, I greatly appreciate!
Thank you for your help!
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.