deeibycoper / grbl-xx_with_arduino

To build Grbl-xxx in Arduino-xxx (actually xxx=1.0.5 or 1.0.5r2)

=======================================================================

Grbl_with_Arduino

This directory contains the last versions August 19, 2014 see B-

================================================================================

These are adaptations to build Grbl-xxx in Arduino-xxx (actually xxx=1.0.5 or 1.0.5r2)

================================================================================

A-  OFFICIAL VERSIONS 3 AXES    : updated from the site Grbl

1- Grbl8cUno : grbl-0.8c for Uno328p 115200 bauds 3 axes

2- Grbl8cMega2560 : grbl-0.8c for Mega2560 115200 bauds 3 axes

3- Grbl9dMega2560 : grbl-0.9d for Mega2560 115200 bauds 3 axes

4- Grbl9dUno : grbl-0.9d for Uno328p 115200 bauds 3 axss

5- Grbl9eMega2560 : grbl-0.9e for Mega2560 115200 bauds 3 axes

6- Grbl9eUno : grbl-0.9e for UNo328p 115200 bauds 3 axes

NEW july 12, 2014

7- Grbl9fUno : grbl-0.9f for UNo328p 115200 bauds 3 axes * upload

8- Grbl9fMega2560 : grbl-0.9f for Mega2560 115200 bauds 3 axes * upload

================================================================================

B-  UNOFFICIAL VERSIONS 4 AXES     : from the official version 0.8c

===> August 19, 2014 : bug fixed for using V,W or B,C

1- Grbl8c1Mega2560 : grbl-0.8c1 for Mega2560 57600 bauds 4 axes X, Y, Z, T

                  with axis T in [A, B, C, U, V, W]

                  mapping Grbl845Mega2560
	       
                  use GrblController-3.6.1-T1 :
                  https://github.com/LETARTARE/GrblHoming/tree/Letartare

===> August 19, 2014 : bug fixed for using V,W or B,C

2- Grbl8c2Mega2560 : grbl-0.8c2 for Mega2560 57600 bauds 4 axes X, Y, Z, T * new

                  with axis T in [A, B, C, U, V, W]

                  mapping Grbl8cMega2560 + fourth axis

                  use GrblController-3.6.1-Tx :
                  https://github.com/LETARTARE/GrblHoming/tree/Letartare

================================================================================

C- UNOFFICIAL VERSION 4 AXES   : from the old version 0.81

1- Grbl845Mega2560 : grbl-0.845 for Mega2560 57600 bauds 4 axes X, Y, Z, T

                  with axis T in [A, B, C, U, V, W]

                  use GrblController-3.6 :
                  https://github.com/zapmaker/GrblHoming

================================================================================

You simply copy the "GrblxxBoard" directory in "Arduino-xxx/libraries"

Example for Grbl-0.9f for Uno :

1- copy "Grbl9fUno" in "Arduino-105/libraries",

2- load in "Arduino-105" "Examples/Grbl9fUno/Grbl9fUno.ino",

3- compile and upload the Uno card

************************** VERY IMPORTANT***************************

put ONE VERSION GrblxxBoard in the "libraries" directory

---

================================================================================

For any problem use "issues"

================================================================================