dioannidis / libusbuartterminal

An Object Pascal UART Terminal for USBasp UART firmwares.

libUSBUARTTerminal

The libUSBUARTTerminal is a gui hid uart client for the USBasp improved firmware's HID UART v1.11 and up, written in Free Pascal and Lazarus.

libusbuartterminal's Issues

access violation

i have this error

my setup as it below

• burn the firmware (firmware\main.hex) to my usbasp
• remove jumper of self programming
• use MCU ATMEGA32A
• make my MCU Initialize UART as Baud Rate 9600 and make it send Text every 1 second to UART just for testing Purpose
• connect MCU to USBASP
• connect the RX of USBASP > TX of MCU
• connect the TX of USBASP > RX of MCU
• open (USBasp UART Terminal) and Connect successfully
• when try open then display this error message and nothing received
• i expected to receive the text sent fro, mcu over UART inside Terminal but nothing happen
• i didn't make any Hardware modification of my USBasp stick , just burn firmware

any help please . thanks

HID Support

Add HID support for devices which implement UART via HID. See https://github.com/dioannidis/usbasp .

Operate on COM port

Hi.

I would like to thank you for the work and ask if it is possible to make the program work with COM port or USB-Serial adapters with FTDI and Prolific?

I know you have several programs for this, but it would be very convenient to have everything in one program.

Thank you.