For details about how to upgrade the Firmware, see: Neptune3-Firmware Update Notes.docx
Check the current screen version in 【Settings】 → 【About Machine】. If the UI version is not displayed, you need to update the screen firmware as well as the motherboard firmware. If the UI version (V1) is displayed, only the motherboard firmware needs to be updated.
屏幕固件与主板固件兼容关系
Compatibility between screen firmware and mainboard firmware
屏幕固件版本
主板固件版本
Screen Firmware Version
Mainboard Firmware Version
V0
V1.0.2/停止下载/stop download
V1
V1_1.0.3 / V1_1.0.4
升级日志/The upgrade log
屏幕固件/Screen firmware
V0
旧版本固件不提供下载
Older firmware versions are not available for download
V1
在【设置】→【关于】中可以查看屏幕固件版本以及主板固件版本
在【设置】中增加【调平温度设置】。默认调平温度:热端140℃ / 热床:60℃
In 【Settings】→【About】, you can view the screen firmware version and the motherboard firmware version
Added 【Leveling Temperature Settings】 to 【Settings】. Default leveling temperature: Hotend 140 ° C / Hotbed 60 ° C
V2 (Stay tuned for)
@@@
@@@
主板固件/Board firmware
V1.0.2
增加【调平温度设置】
修复了一些已发现bug。改善了调平方式。
Added 【Leveling Temperature Settings】
Fixed some discovered bugs. Improved leveling method.
Fixed some discovered bugs. Improved leveling method.
Optimize return to origin speed and leveling speed.
To solve the problem that the Z-offset adjusted during printing will not be saved:During printing, click 【stop】→【confirm】 or click 【confirm】 after printing is completed, the Z-offset value will be saved automatically.
G28 return to the origin speed and G29 leveling speed were optimized again.
Change the default leveling temperature. Hot end: 0℃ / hot bed: 60℃.You can still change the 【leveling temperature】 in 【Settings】.
The default value is 【z-offset =0.1】. In general, you do not need to set the z-offset after leveling.
Fixed a bug in the power-off continuation function where the nozzle distance from the model was too high when recovering print.(Note: If the Z-axis drops or the model falls off after power-off, the power-off refill function cannot be used normally).
Optimize print operations. In the printing process, after clicking 【Pause】, the extrusion machine will draw back 10mm to prevent material leakage.
Optimize print operations. After pausing printing, click 【Resume】 to extrude 9mm→ pull back 9mm→ move to the printing position → continue normal printing. Avoid the empty print problem.
Optimize print operations. After clicking 【Stop】 to print, the extrusion machine will draw back 10mm to prevent material leakage.
V1_1.0.5-Beta
新增Z轴自动补偿倾斜校正功能(实验性)。使用M853 L M控制校正范围( -1 > L > 1 ; -1 > M > 1 ) 。调试方法:NARUTOfzr#37
Added Z-axis automatic compensation tilt correction function (experimental). Use M853 L M to control the correction range (-1 > L > 1; -1 > M > 1). Debugging method: NARUTOfzr#37
Added - You can use the M0 code in gcode to pause printing to realize the pause function of the specified layer. How to use: NARUTOfzr#38
Optimized the loading/unloading filament operation button in printing. Operation method: Click "Unload/Load Filament", click "Quick Unload/Load Filament", and then click "Stop Loading Filament". Realize quick refueling. Operating instructions: Instructions for loading/unloading filaments (during printing)
The power failure recovery function is disabled by default. You can add M413 S1 to the gcode start program to turn on power-off recovery (S0 is to turn off power-off recovery).
Enable Host Action Commands. Enrich the online interactive experience between printer and octoprint.