CAD files for the HTSTEM keyboard.
Test board for the project. 12 keys, 12 addressible LEDs, and rotary encoder. First time I've actually gone through with ordering a PCB to be made.
Source code for firmware is at another repo.
BOM for macro12:
Quantity | Description | Link | Note |
---|---|---|---|
1 | Teensy 2.0 | https://www.pjrc.com/store/teensy.html | Or any compatible microcontroller. I used an Elite-C from Keebio |
1 | PEC11 12mm Rotary Encoder | https://www.digikey.com/en/products/detail/bourns-inc/PEC11L-4220F-S0015/2440942 | |
1 | Knob | https://www.digikey.com/en/products/detail/sparkfun-electronics/COM-10001/7229870 | Any knob really |
12 | Addressible LED SK6812MINI-E Reverse Mount | https://www.adafruit.com/product/4960 | 10 pack so buy qty 2 |
12 | Diode 1N4148FS-ND | https://www.digikey.com/en/products/detail/onsemi/1N4148/458603?s=N4IgTCBcDaIIwDkAsckA4BiBlAtAgIiALoC%2BQA | Or similiar |
12 | Key Switch | - | Your choice |
12 | Key Cap | - | Your choice |
1 | 3D Printed Case | - | Source files here |
1 | PCB | - | Source files here |
4 | Rubber Feet | https://www.adafruit.com/product/550 | Optional |
- | Some tape | - | To hold the case halves together. |