dzlonline / magloop Goto Github PK

Hello guys
I'm trying to implement your project in two arduino nano (atmel 328p).
My intention is to tone a buzzer when the receiver is insider de loop.

I know that there are some time you don't update this project, but as I'm far from beeing a expert in this I could use some help.

By compiling the code you posted here the arduino IDE is telling that I have to update an library (signal.h) to interrupt.h

I've already assembled as you mention on the website but i had no sucess in making it work.

Could you help me?
Best regards

Hi, I've try this with Arduino.. works great :-) But I wanted to make it work on 3.3V on Moteino and there it fails, Is it possible that the maths are done based on 5V. Can we adapt ?

Hi,
I would like to be able to detect the field from a larger distance from the wire, can you suggest a way this can be achieved? I note you say that an audio amplifier could be used, but do you have any experience on the best way to achieve this?
Thanks for your help!

Hi!
I'd like to implement the data receive sketch on an Atmega8 - unfortunately the interrupts dont work the same and theres no ADCSRB register on an Atmega8- is there any way to make this work without? Ive tried to understand the .h file and adjusted the code to match the available register names but its a bit beyond my skill to work out how it works.
You'll be rewarded with lots of good karma if you can help me!

Hi,
i am new to robotics and having been trying to implement this. My circuit works but i can't figure out how i can detect negative and positive values, so i actually now if i am inside the loop or just near.
Also if you have a couple of free minutes, if you could try explaining how the circuit works a little more in Detail.
Thanks already for contributing this interesting project.
F.Wittmann