egzumer / uv-k5-firmware-custom Goto Github PK
View Code? Open in Web Editor NEWA merge between https://github.com/OneOfEleven/uv-k5-firmware-custom and https://github.com/fagci/uv-k5-firmware-fagci-mod
License: Apache License 2.0
A merge between https://github.com/OneOfEleven/uv-k5-firmware-custom and https://github.com/fagci/uv-k5-firmware-fagci-mod
License: Apache License 2.0
When you stop the scan with the PTT the Walkie stays in permanent TX in v0.9
My radio is not receiving weak signals
Its may be because of broken AGC.
Fagci spectrum analyzer sometime hangs and makes QS not responsive until power reboot. Just to play with analyzer to reproduce.
There is a ready-made font from mbg, maybe it can be used in the firmware. I attach screenshots and the font itself. Of course, everything is at your discretion.
font.c.txt
Cannot put eg. 470 MHz into VFO. Tried on the latest egzumer release.
The result is VF07 000.60252
With release v0.4 2397e39 I can not download or upload settings with chirp (using chirp v20230928)
Trying to download from radio, it starts and after a second
Error communicating with radio. Bad response header
Also trying to upload to radio
Error communicating with radio. Bad response header
Hi, is it possible to insert this change on the latest version of the 1off11 firmware?
#45 S-metro stile piotr022
Two k5s, A is the original firmware, B is v0.14.1 firmware.
both same freq eg438.500, both with DTMF (D Decd) turned on. After this setting, B calls A ,A only light and no sound,
but both with DTMF (D Decod) turned off become normal
You deserve a lot of congratulations. Your tireless and selfless work has made me see something I have been wanting to do for a long time. Uv-k5 V0.9 best one till now. You turned a trivial thing into a precious thing.
Thankyou very much.
Hello
In the version v0.12 you changed this - Fixed restoring channel number/frequency on scan exit
is it possible to return in the new software so that after exit of scaning, it does not return to the last channel before scanning, but stays on the channel where the scan stopped, this was a good solution when the radio found a active station, then after pressing the exit it stayed on this frequency and now returns to channel that was set before the scanning has started.
If it won't be changed, can I change it myself? Where can i find this ?
Best Regards
Pawel
V11 release
I noticed that when an external mic is connected the radio will not tx using mic PTT on a busy channel/active repeater.
BCL set to OFF.
The PTT on the radio will tx the radio on a busy channel with external mic connected.
The PTT on external mic will tx radio on inactive channels.
I have tried multiple external mics, all with the same result.
Thank you very much for all your hard work
James MM6WER
After entering item 51(BATVOL) of the menu, the automatic lock screen cannot be unlocked
Hello, thanks so much for adding the Band A/B shortcut key. What a time saver. Is there any way to also add a shortcut item for switching between VFO / Memory?
Makefile doesn't have ENABLE_SPECTRUM
No compile option of f-calibration. Yesterday it was available
Is it possible to set the RX backlight for channel A or B separately to prompt the user which channel channel is receiving.
Dear Developer:
I found a bug when i input a offset config,it can be reviewed by these steps: (version: v0.13)
1. go to menu 'TxOffs', and then into edit,
2. (example ,the target offset is 8MHz, then i should input '008.000') then, input 008.000
3. it will display wrong~ then tried input '800.000',it display '008.000'.
i think this is not a feature ,may be it is a bug~: )
by the way, this project is very nice, i really love it, it gives a normal radio more way to play~~ thanks! ; )
So far I am very satisfied with the latest adjustments of the v.10 release, but when I looked around the menu I came across unknown functions:
Menu 48: LIVE
Menu 43: RSP
Menu 33: COMPND
Menu 14: BUSYCL
Maybe someone among you can giving me the latest function explanation
Thank you very much for all the effort, 73 and all the best
Best regards, Frie Van Peer
Among many firmware versions, I really like your firmware version and it has become perfect. Thank you very much for your selfless efforts!
Can you add the function of 2nd PTT to the F1shrt or F2shrt options to transmit the second frequency, so that those in need can freely choose from multiple functions,that you can choose monitor,others can choose the functions they need.
If this leads to excessive firmware volume, options can be added to the makefile to allow users to decide whether to add 2ndPTT
The SQL threshold is too high even by 1.
Spectrum is not properly working onUhf band.
When entering a frequency - button [5] in the spectrum the numbers entered are wrong. Eg press 1, 2 comes up, press 0, 1 comes up on screen and so on.
Not sure if its the Spectrum or a small bug??
Frequency capture is turned off when the subtone is defined. There is no such problem in firmware 1-11
I like new Smeter looks, but I noticed that when the squelch is set to 0 or pressing the side monitor button, the smeter shows a high S level instead do two or three lines more consistent with background noise
I understand from some of your comments it may not be possible to add any new Spectrum versions.... So this is just a curiosity question more than anything. SO please do not see this as and issue, or request.
Is therer a possiblily to add the options seen in the screen shot
They have been in the now removed refactor spectrum version for some time and curious as to the possibility of having them in Your FW as they would be useful.
Again d not take this as a request just curious if possible..
thank you for building the FW,
Problem in Strong signal reception .
Cutting in Rx in v.14.
(Signal -47 +20, cutting started when receiving audio)
How can I make the SQL more soft for weak signals?
In the V0.8 version, after pressing the * key to input 3 number, PTT transmission did not respond, and DTMF code cannot be sent
A serious isue has been noticed in latest Version (V0.8) plz. Battery voltages drops immediately during Tx and resumes after. My Talkie's display vanished two times. After that I installed stock firmware, there was no such issue.
-custom-2/ -I D:/TWatch/uv-k5-firmware-custom-2//external/CMSIS_5/CMSIS/Core/Include/ -I D:/TWatch/uv-k5-firmware-custom-2//external/CMSIS_5/Device/ARM/ARMCM0/Include -c app/main.c -o app/main.o
In file included from app/main.c:28:
D:/TWatch/uv-k5-firmware-custom-2/app/spectrum.h:127:12: error: padding struct to align 'frequencyChangeStep' [-Werror=padded]
127 | uint32_t frequencyChangeStep;
| ^~~~~~~~~~~~~~~~~~~
D:/TWatch/uv-k5-firmware-custom-2/app/spectrum.h:151:1: error: padding struct size to alignment boundary [-Werror=padded]
151 | } ScanInfo;
| ^
D:/TWatch/uv-k5-firmware-custom-2/app/spectrum.h:159:1: error: padding struct size to alignment boundary [-Werror=padded]
159 | } RegisterSpec;
| ^
D:/TWatch/uv-k5-firmware-custom-2/app/spectrum.h:165:12: error: padding struct to align 'f' [-Werror=padded]
165 | uint32_t f;
| ^
cc1.exe: all warnings being treated as errors
make: *** [Makefile:326: app/main.o] Error 1
This might be a problem lol
Hi, great work first of all.
A little issue, the Smeter indication is inconsistent. When, for example, the numerical indication shows 9+10 the graphic bar is approximately halfway and should correspond at most to a signal of 6/7
Dear Egzumer;
As a feature request, would it possible to implement a menu option to adjust the LCD screen backlighting brightness..?
Thanks in advance!
P.s.: great job, IMO your firmware is the best so far!
After entering the automatic lock keyboard of the radio, pressing and holding the F key cannot unlock it.
Hi my firend, I found a problem in this version, tone 1750Hz not working in long press side key 1.
Hello EGZUMER! Congratulations on your work, I really appreciate your firmwares. In v0.12 I noticed a loss of sensitivity in AM airband reception. I live near an airport and after this update reception decreased a lot. I hope I'm helping with my feedback! TKS
PS.: The functions added to the menu were very good, especially the reorganization and programming of the side keys!
Hi egzumer,
Someone's pointed out that the full charge lithium battery voltage is 8.4V (which is correct). But your little percent function is saying 8.15V is 100% full.
I've done a battery cal using a DMM, so the voltage the radio is saying is now correct (it was actually quite a bit out), that's assuming the battery on the back doesn't have any series diodes to the two gold terminals at the bottom of the battery (where I measure the battery voltage from).
How can I save the changes in makefile .I want to make my custom bin file for myself.
Would you please add F+7 to change AM\FM\SSB like fagci mod? And display AM\FM\SSB in VFO or MR.
The squelch tail elimination is not working.
I'm very sorry for not expressing myself clearly.
When you were integrating the OneOfEleven firmware, the addition of the scan list function in the OneOfEleven firmware “keypad-5/NOAA button now toggles scanlist-1 on/off for current channel when held down - IF NOAA not used” was covered by fagci spectrum analyzer (F+5 to turn on), so I was wondering if you could use F+keypad-7 to complete toggles scanlist-1 on/off for current channel when held down, as the VOX function is not commonly used.
In addition, keypad-8 or 9 are not very commonly used and can be used to arrange other functions
Also, I think your firmware is currently the best, thank you very much!
Hello,
I inform you that Spectrum keep freezing while switching to AM.
For example: VFO 135.450mhz - F5 - 0
Hi,
First I have to thank you for the best all-around firmware for these radios. Keep doing the great job!
And about the problem:
Findings from the current version of your software (egzumer-UV-K5 1of11+fagci_ 25.10.23v1.packed.bin). I noticed a change in AM reception regarding aviation frequencies. The sound is quieter, and there are noises that have not appeared in previous software versions. Kind of windy, swirly(?) sound during reception, that I have no heard before. And also I have to adjust the volume all the way up so that I can hear anything properly at all. On the other hand, now I can hear weaker signals more clearly (e.g. -90dbi - -100dbi), which I haven't heard properly before. I switched back to the previous software version (egzumer-UV-K5 1of11+fagci_ 22.10.23v1.packed), and the AM reception went back to "normal".
Video link for the new firmware reception: https://www.dropbox.com/scl/fi/f3o5ls5kcfuurzmyzlb9n/VID_20231025160119.mp4?rlkey=tkftphkzss5b9clnu8wsheh9g&dl=0
Video link for the "normal" reception: https://www.dropbox.com/scl/fi/vl9hcdvklz1v3uhyimixn/VID_20231003165949.mp4?rlkey=5tk6sytc2xqdzjz5othsld20w&dl=0
The one with the "normal" reception, was with quite an old firmware (with the AM fix on), However It compares qualitatively with other older software when it comes to AM reception.
Firmware bins that I have been using are downloaded from the tha Quansheng UV-K5 Firmwares -Telegram channel.
VOX is not commonly used, can we use f+7 for toggles scanlist-1 on/off for current channel when held down
long press 7 is activating VOX
this happend to me bij accident
although for others keys it is very handy, why for this key ?
how can this be deactivated ?
the actual setting is 100x smaller than input.
if i set 700Mhz, the actual offset will be 7Mhz
I am missing the 1750 hz, which I had programmed under long-press Second Function key.
Idea is to add an 1750 ON/OFF in (hidden) menu.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.