emilot / recipe

installation scripts and files needed for Archphile

recipe - installation scripts and files needed for Archphile

This repository contains some very basic scripts that I use in order to create archphile images. In order to use these scripts you must first install ArchlinuxARM.

• for Raspberry Pi 2 and 3:

https://archlinuxarm.org/platforms/armv8/broadcom/raspberry-pi-3

• for Odroid C2:

https://archlinuxarm.org/platforms/armv8/amlogic/odroid-c2

After that, login to your fresh ArchlinuxARM installation as root (you will need PermitRootLogin yes" >> /etc/ssh/sshd_config):

pacman -Sy wget

The last step is to download and run the script. The direct links of the scripts are:

• https://raw.githubusercontent.com/emilot/recipe/master/scripts/archphile-create-script-rpi.sh
• https://raw.githubusercontent.com/emilot/recipe/master/scripts/archphile-create-script-odroidc2.sh

For example, if you have a Raspberry Pi 2 or 3 you have to do the following:

wget https://raw.githubusercontent.com/emilot/recipe/master/scripts/archphile-create-script-rpi.sh

chmod +x archphile-create-script-rpi.sh

./archphile-create-script-rpi

The scrips are dependent on ArchlinuxARM builds for the supported devices, which means that they might not work or need modifications when a new ArchlinuxARM image is released.

All scripts are licensed under the GNU GPL V2.