epit3d / spycer Goto Github PK

Hi Dear
I am really interested to this slicer software, but it is not fully functioning, and I am not sure what it is missing.
I am using Windows 10, I built all “goosli” binaries, and put them as recommended with 'data' directory to spycer as it is shown in the below picture. "main.py" runs fine, but when I upload the STL file and try to slice it, it generates the error showns below
Can you please help?

Thanks

I make 'lib' directory to ' C:\Users\USER\spycer-master\spycer-master' . and in it, placed 'planes_file.txt' and goosli bin file and data directory of goosli folder....

and then clicked '5D generator button' but i get error....

start slicing
Error: (<class 'subprocess.CalledProcessError'>, CalledProcessError(1, ['./lib/goosli', '--cmd=slice', '--settings=settings.yaml']), <traceback object at 0x0000016D33C28680>)
Error2: b"2023/05/04 23:22:55 yamlFile.Get err: open data/config.yaml: The system cannot find the path specified. \ngoosli: error: unknown long flag '--cmd', try --help\n"

what is this.... what can i do ...... help me ser............please.........plese....

can run for Mac ?

Good morning,

First of all, thank you for the code you provided.
I have a little problem with spycer and I wanted to know if you could help me.
I took the code provided, I changed the paths to fit my files and when I compile all goes well and the Spycer window opens. I load an.stl file, in this case 3D benchy to do tests but when I select cutting, I get the following message that appears :

`File "C:\Users\micad\AnacondaProjects\lib\subprocess.py", line 997, in _execute_child
startupinfo)

PermissionError: [WinError 5] Accès refusé`

So I wanted to know if you have any idea about this problem,
thank you in advance.

in the pictures 'spycer' was shown in English but when I built, it was in Ukrainian I think, How can I change it in English? I couldn't figure that out.

Hello Everyone,

I am currently researching possibilities on printing non-planar using a 6-axis robotic printing station. I wanted to try the spycer in order to see the possibilities it provides, but i think the installation is outdated. In the install section a params.py file is mentioned but I am unable to find it.
Can you give me a quick explanation on how to install the version without the param.py?

Thanks in advance.

As you said, I ran spycer with the 2020-10-24 version. It works. However, looking at the generated out-goosli.gcode, the values ​​of the x, y, and z axes appear, but the contents of the a-axis and b-axis value are not visible.

Which part of the source code should I trace and examine to solve the problem?

For reference, when I run spycer in Python, this message pops up in the debug window.

Even after looking at it for days and days, I can't really figure it out.

I would appreciate it if you could let me know.

============my build message============
C:\Users\USER\Go\src\github.com\l1va\goosli\slicers\test_models\odnzak.stl
['./goosli', '--stl=C:/Users/USER/Go/src/github.com/l1va/goosli/slicers/test_models/odnzak.stl', '--gcode=goosli_out.gcode', '--layer_height=0.2', '--originx=-32.50090503692627', '--originy=0.03284502029418945', '--originz=-0.0', '--rotcx=0', '--rotcy=0', '--rotcz=50', '--wall_thickness=0.8', '--fill_density=20', '--bed_temperature=60', '--extruder_temperature=200', '--print_speed=50', '--line_width=0.4', '--slicing_type=vip', '--planes_file=planes_file.txt', '--print_speed_layer1=50', '--print_speed_wall=50', '--filling_type=Lines', '--angle=30', '--retraction_speed=0', '--retraction_distance=0', '--support_offset=1.0', '--skirt_line_count=3']
cut mesh, init and joined 72 2
A OR B ZERO 0.000 0.000 0.272 4.871 5.142
A OR B ZERO 0.000 0.000 1.350 3.935 5.285
.......
A OR B ZERO 0.000 0.000 1.090 4.341 5.431
A OR B ZERO 0.000 0.000 1.163 4.441 5.604
not closed 0.000
A OR B ZERO 0.000 0.000 0.567 2.908 3.475
A OR B ZERO 0.000 0.000 0.534 4.614 5.148
not closed 2.679
.....
not closed 14.586
not closed 14.586
A OR B ZERO 0.000 0.000 1.394 3.479 4.873
not closed 15.029
not closed 15.029
.....
not closed 20.012
not closed 20.012
A OR B ZERO 0.000 0.000 1.009 4.432 5.441
not closed 20.170
........
not closed 20.644
not closed 20.644
A OR B ZERO 0.000 0.000 1.331 3.835 5.166
not closed 20.802
not closed 20.802
not closed 20.872
not closed 20.872
not closed 20.925
not closed 20.925
A OR B ZERO 0.000 0.000 1.059 4.103 5.161
A OR B ZERO 0.000 0.000 0.731 4.262 4.994
not closed 20.977
.......
not closed 20.441
not closed 20.441
A OR B ZERO 0.000 0.000 1.328 1.295 2.623
not closed 20.390
.......
not closed 8.516
not closed 8.516
A OR B ZERO 0.000 0.000 0.303 1.490 1.792
not closed 7.181
not closed 7.181
not closed 4.794
not closed 4.794
A OR B ZERO 0.000 0.000 0.088 5.109 5.197
not closed 2.408
not closed 2.408
not closed 0.021
not closed 0.021
A OR B ZERO 0.000 0.000 0.109 2.378 2.487
MORE 5 2.150 2.150
.......
MORE 5 6.566 6.566
A OR B ZERO 0.000 0.374 0.999 1.450 0.000
........
A OR B ZERO 0.000 0.000 0.001 5.425 5.424
MORE 5 41.790 41.790
A OR B ZERO 0.000 0.000 0.006 0.053 0.048
A OR B ZERO 0.000 0.000 0.015 0.005 0.016
MORE 5 2.002 1.115
.......
MORE 5 8.194 8.194
MORE 5 2.352 2.352

Hi, I'm Vrajesh. I am working on a project where this software would be very helpful. I did as you directed for the software to run in Ubuntu 18.04 but got some issues. I have mechanical engineering background so doesn't know much about the advanced stuff.
Image of the problem are attached below.

The Folder

Hoping for your help