fonic / scan2pdf Goto Github PK

scanimage -h -d "net:192.168.1.186:epsonscan2:XP-7100 Series:001:008:esci2:usb:ES0174:4423"
Usage: scanimage [OPTION]...

Start image acquisition on a scanner device and write image data to
standard output.

Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE   use a given scanner device (e.g. hp:/dev/scanner)
    --format=pnm|tiff|png|jpeg  file format of output file
-i, --icc-profile=PROFILE  include this ICC profile into TIFF file
-L, --list-devices         show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
                           can be specified: %d (device name), %v (vendor),
                           %m (model), %t (type), %i (index number), and
                           %n (newline)
-b, --batch[=FORMAT]       working in batch mode, FORMAT is `out%d.pnm' `out%d.tif'
                           `out%d.png' or `out%d.jpg' by default depending on --format
                           This option is incompatible with --output-file.    --batch-start=#        page number to start naming files with
    --batch-count=#        how many pages to scan in batch mode
    --batch-increment=#    increase page number in filename by #
    --batch-double         increment page number by two, same as
                           --batch-increment=2
    --batch-print          print image filenames to stdout
    --batch-prompt         ask for pressing a key before scanning a page
    --accept-md5-only      only accept authorization requests using md5
-p, --progress             print progress messages
-o, --output-file=PATH     save output to the given file instead of stdout.
                           This option is incompatible with --batch.
-n, --dont-scan            only set options, don't actually scan
-T, --test                 test backend thoroughly
-A, --all-options          list all available backend options
-h, --help                 display this help message and exit
-v, --verbose              give even more status messages
-B, --buffer-size=#        change input buffer size (in kB, default 32)
-V, --version              print version information
Output format is not set, using pnm as a default.

Options specific to device `net:192.168.1.186:epsonscan2:XP-7100 Series:001:008:esci2:usb:ES0174:4423':
  General:
    --mode Color|Grayscale|Monochrome [Color]
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --source ADF|Flatbed [ADF]
        Selects the scan source (such as a document-feeder).
    --duplex[=(yes|no)] [no]
        Selects the ADF mode (yes:duplex/no:simplex)
    --resolution 50..1200dpi (in steps of 1) [200]
        Sets the resolution of the scanned image.
    --x-resolution 50..1200dpi (in steps of 1) [inactive]
        Sets the horizontal resolution of the scanned image.
    --y-resolution 50..1200dpi (in steps of 1) [inactive]
        Sets the vertical resolution of the scanned image.
    --scan-area Letter|Legal|A4|A5|A5 (Landscape)|A6|A6 (Landscape)|A8|A8 (Landscape)|B5 [JIS]|Postcard|Postcard (Landscape)|PlasticCard|Maximum|Manual [Manual]
        Select an area to scan based on well-known media sizes.
  Geometry:
    -l 0..215.9mm [0]
        Top-left x position of scan area.
    -t 0..355.6mm [0]
        Top-left y position of scan area.
    -x 0..215.9mm [215.9]
        Width of scan-area.
    -y 0..355.6mm [355.6]
        Height of scan-area.
  Enhancement:
    --deskew[=(yes|no)] [inactive]
        Rotate image so it appears upright.
    --dropout None|Red|Blue|Green [None]
        Selects the dropout.
    --text-enhance None|Normal|High [inactive]
        Text Enhance
    --rotate 0 degrees|90 degrees|180 degrees|270 degrees|Auto [0 degrees]
        Rotate
    --skip-blankpages 0..100 (in steps of 1) [0]
        Skip Blank Pages Settings.
    --brightness -100..100 (in steps of 1) [0]
        Controls the brightness of the acquired image.
    --contrast -100..100 (in steps of 1) [0]
        Controls the contrast of the acquired image.
    --threshold 0..255 [128]
        Select minimum-brightness to get a white point
  Other:
    --double-feed-detection None [inactive]
        Detection Double Feed
    --gamma-correction 0.5..3 (in steps of 0.0999908) [2.2]
        Selects the gamma correction value from a list of pre-defined devices
        or the user defined table, which can be downloaded to the scanner
    --image-count 1..999 (in steps of 1) [0]
        Image Count
    --long-paper-mode[=(yes|no)] [no]
        Select this mode if you want to scan documents longer than what the
        ADF would normally support. Please note that it only supports automatic
        detection of the document height.
    --transfer-format[=(yes|no)] [yes]
        Selecting a compressed format such as JPEG(=yes) normally results in
        faster device side processing.
    --remove-background None|Standard|High [None]
        Remove Background
    --background-color Black|White [inactive]
        Background Color