g4klx / p25clients Goto Github PK
View Code? Open in Web Editor NEWSimple clients for P25. A gateway and a parrot.
License: GNU General Public License v2.0
Simple clients for P25. A gateway and a parrot.
License: GNU General Public License v2.0
Johnathon could you please add TG31188 to the p25 hosts list for the same reasons as I mentioned in the NXDN client issues..Thank you
31188 w9windigital.org. were using port. 41000 if that is also needed
Rick Nicholson N9UMJ
Hello Jonathan,
Please revise the description for TG 51575 from:
"PH-Dumaguete Link to YSF and DMR (BM 51575)" to
"PH-Dumaguete Link (Multimode)"
There is interest in bridging it to another DMR talkgtoup on a scheduled basis.
Thank you.
73
Dan, 4F7DAD
Can you add the 2 following P25 Reflectors to the list
2700 2700p25.ddns.net 41000
3300 3300p25.from-pr.com 41000
Please add:
P25 TG 31426 3.215.215.169:41001 PA Cross Mode (alt)
Thanks again, for all that you do.
Jeff
Good afternoon,
I have found some errors on network ports for P25 reflectors in Romania.
Please make sure they are as follows:
226 on port 41000
2263 on port 41003
2265 on port 41005
Thank you very much,
Catalin
I know I can set a Startup reflector in P25Gateway.ini. Is there a way to make this a default reflector.
I would like to have the gateway reconnect to the Startup reflector after a period of inactivity on a different reflector.
For example, let's say Startup is set to 10200. Someone keys up on 10300 and has a conversation. After a period of inactivity (10 minutes), the gateway would reconnect to 10200.
I found InactivityTimeout in the P25Fateway.ini file, but I can't figure out what it does. The only reference I see for it is in Conf.cpp. And, there are no comments about it's intended use.
Thanks in advance,
Michael AF6FB
Hi Jonathan
Could you please add the follow new P25 Reflector to the "global" P25Hosts file:
3026 3026.hamshack.info 41000
Many thanks and Kind Regards
Andrew VE6EN/M0GRU
I’ve created a new P25 talkgroup and was wondering if you would be able to add it to the MMDVM P25 hosts file please?
Details:
TG10444 vk64.chiffers.com 41000
New Router and Modem was replaced and Public IP was changed for the following talk group:
Virginia
Talk Group 31161
New IP address is:
24.49.24.3
In the latest build - the P25 Parrot appears to receive the audio fine, BUT the TX audio from the parrot is chopped into a small transmissions, the audio is there but garbled too.
how can we go about getting our P25 TG added to Pi-Star Host
If there is a connected reflector and the user keys up on a talkgroup not in P25hosts.txt, the repeater will retransmit the signal on the selected talkgroup and to the connected reflector.
I feel the behavior should be to retransmit the signal, but not send it to the reflector.
For this scenario, I will use the term "repeater", but it could be a hotspot. I'm also using talkgroup 31077 because this is where our reflector is attached. But, any talkgroup with a reflector should work. I'm using talkgroup 2, because it isn't in P25hosts.txt so it does not connect to a different reflector when I key it up.
Duplication Scenario:
Result:
Radio 1 will hear the traffic and see it on talkgroup 31077
Radio 3 will hear the traffic and see it on talkgroup 2
Expected result:
Radio 3 will hear the traffic and see it on talkgroup 2
I guess you could also test this by simply looking at the reflector dashboard. But, this scenario gives a good example of what we want to do. We would like to hold conversations local to a repeater and not go over the network.
I know we can send a disconnect, but that just adds to the training for our users.
I don't see any obvious setting in the P25Gateway file that looks like what I want to do.
I would be fine the gateway disconnects from the reflector when someone keys up on a talkgroup that isn't associated with a reflector. Or, it could leave the reflector connected and simply not send traffic to the reflector.
THoughts, suggestions?
Thanks in advance,
Michael AF6FB
We are setting up a couple of Pi-Star based repeaters for P25. What happens if the internet connection is lost?
Does the repeater continue to operate in stand-alone mode? For example, retransmitting received signals on the same talkgroup? Or, does it stop repeating?
Is there a "local" talkgroup that is similar to Local/2 on DMR? Specifically, a talkgroup that will re-transmit on the local repeater only. And, does it work without a network connection?
The "InactivityTimeout" setting is not in the P25Gateway.ini file included with the Pi-Star 3.4.17 release. Do you know if the code on that version supports this setting. We would like our repeaters to return to our own reflector when people are done with their conversations.
As a note, we are using the KS-DMR STM32 boards in an MTR2000 repeater, they are equipped with a NanoPi and Pi-Star 3.4.17 is the most recent build for this board. We have run updates, but I don't know what version we need.
We are going to do some testing in this area on Monday, but I was hoping to have a little more info going into the test.
Is there a way to remotely monitor P25Gateway? We will have four repeaters up soon. I would like to create a dashboard for our admins that will show the connected reflector and some last heard data for each repeater.
Thanks in advance,
Michael AF6FB
The PAPA System
Hi, can you please add the following talkgroup to the hosts file.
50535 p25tg50535.vkradio.com 41000
Dear Sir
Could you please add p25 reflector of Taiwan in the list for pistar user update ? Info as below
10404 p25tw338.ddns.net 41000
I had update this info to P25Hosts.txt and it already merged
Thanks
Can you please add TG 7272 216.240.173.55 41000
This is a reflector that is tied to the PAPA analog system
Thank you
73
W6SAT
Hope I'm posting this in the right place. If not, please direct appropriately.
I would like to add the following new reflector:
31679 xlx.borris.me 41000
73:
KE4DYI
Hi John
Can you please add
South Jersey 31341 p25.kc2idb.net 41000 http://p25.kc2idb.net
Thanks Mike N2ICV
Can you please add talkgroup 31171 to the host file. This is linked to to Wires x, dmr, nxdn, Ysf reflector, and 3 dstar reflectors. There is plenty of activity of here we run a net on here and also severe weather net the ip address for it is 74.208.235.115 41000
Please add P25 new Reflector!
RI DIGITAL LINK TG#31444
149.28.54.153 port 41000
We also have nxdn,dstar,dmr,ysf listed in mmdvm host files
thanks
Hi,
Can you add my P25Reflector to the master file please?
11069 173.26.181.228 41000
It's technically a DHCP address, but it hasn't changed in 5 years, plus I intend to move it to the cloud eventually, at which time I'll advise the changes. Thanks.
-Bob
KK6RQ
ps. I hope this is the right place to post this and I apologize if it isn't...
Could you please add TG53099 to the P25Hosts.txt file, This will link to XLX750 YSF reflector 53099 NXDN Reflector and DMR TG53099. It will mainly be used for New Zealand operators
53099 203.86.206.49 41000
Can you please add the NorCal P25 as below?
30639 wiresxdigi.dyndns.org 41000
I searched tickets, but I couldn't find anything about this. Many of the modern P25 radios support sending location information (APX and NX radios specifically).
This seems to work correctly on Motorola P25 repeaters (for both Motorola and Kenwood radios), but not on MMDVM repeaters/hotspots.
Is there a setting that would enable this? Or, am I not setting my radio up correctly? Suggestion?
Thanks in advance,
Michael
Good afternoon.
Please add the following 2 reflectors to the P25 reflector list
226 p25.dstar-yo.ro 41000 (Romania YO P25 Network)
2263 p25.dstar-yo.ro 41000 (Bucharest YO3 P25 Network)
Thank you very much
Catalin - YO3CAT
Hi Jonathan,
Could you please add this to the list?
# 9846 P25 Portal to WW8GM YSF network www.gmarc.org
9846 p25.dudetronics.com 41001
Thanks,
Doug AD8DP
Dear Sir,
Could you please add p25 reflector of the German Pegasus Project in the list for pistar user update ? Info as below. Many Thanks & 73s
10328 5.9.59.26 41000
We have four repeaters running on MMDVM devices. We have been asked by a number of people about support for the Soft ID feature that allows a radio to send both it's ID and a text identifier (call sign).
Is this supported by P25 Reflector (and other components)? Is there anything I need to do to enable it?
Related, do you know if this feature is supported on the Kenwood NX-5000 radios, if so, do they call it something else?
Thanks in advance,
Michael AF6FB
It is a integral part of a YSF2P25 VW bridge allowing YSF pistar users to experience to true great audio of P25 on YSF, if they could only select this TG 4 for P25, which is missing in the list. It does not interfere with
the P25NX naming scheme, and is in more demand than other already on the list. It is just another entry on the list, why so difficult to add ?
We decided to change our reflector ID so it matches our DMR TG. Also to add a reflector that is not bridged to our analog system.
Please update as follows:
31077 216.240.173.55 41000
31078 216.240.173.55 41000
Thank you,
Michael
There are two new reflectors for P25 on XLX045 it would be helpful if they could be added to the P25Hosts.txt file. I have checked them both out and they are operational.
6 70.44.20.24 41000
31425 70.44.20.24 41001
Thanks
Jeff, WA3PNY - Sysop XLX045
I am seeing a issue with the field delimiters in the host file. Below is the host file with TAB delimiters
My P25Gateway.ini is set to startup 10400 for this test.
10100 85.119.82.151 41000
10200 45.62.252.188 41000
10300 176.9.1.168 41000
10400 125.63.57.138 41000
root@mmdvm:/opt/P25Gateway# ./P25Gateway P25Gateway.ini
I: 2016-10-17 18:35:43.625 Opening P25 network connection
I: 2016-10-17 18:35:43.627 Opening P25 network connection
I: 2016-10-17 18:35:43.630 Loaded 5 P25 reflectors
I: 2016-10-17 18:35:44.151 Loaded 44607 Ids to the callsign lookup table
M: 2016-10-17 18:35:44.153 Starting P25Gateway-20161011
M: 2016-10-17 18:35:44.156 Linked at startup to reflector 10400
I: 2016-10-17 18:35:44.158 Started the DMR Id lookup reload thread
Notice P25Gateway is reporting 5 reflectors. There are 4 in the file and it linked to startup 10400.
I replaced the TABs between the fields for 10400 with spaces
root@mmdvm:/opt/P25Gateway# ./P25Gateway P25Gateway.ini
I: 2016-10-17 18:36:49.323 Opening P25 network connection
I: 2016-10-17 18:36:49.325 Opening P25 network connection
I: 2016-10-17 18:36:49.328 Loaded 4 P25 reflectors
I: 2016-10-17 18:36:49.891 Loaded 44607 Ids to the callsign lookup table
M: 2016-10-17 18:36:49.894 Starting P25Gateway-20161011
I: 2016-10-17 18:36:49.896 Started the DMR Id lookup reload thread
Now reporting 4 reflectors and not connecting at startup to 10400
P25Gateway seems to stop processing if it does not like the delimiter.
73, Steve N4IRS
Hi,
Can you change the IP associated with 11069 to 173.21.251.157 please?
I'll be switching my setup over to dynamic DNS shortly, so I don't see this becoming a habit.
Thanks.
-Bob
KK6RQ
Could you please add this new p25 reflector to your host list ?
Technology First TG 204
204 203.129.17.27 41000
Many thanks
Ronald Campbell
Admin KN4UVP
Greatings from the Philippines.
Can you please add our P25 Reflector to the list?
address: 140.82.14.24
port: 41000
talkgroup: 51575
description: PH-Dumaguete Link
This reflector is currently link to YSF and DMR (BM 51575).
Thank you and 73.
Dan, 4F7DAD
Hi, I have established a new reflector for Pennsylvania use
Pennsylvania
3142 3.215.215.169:41002
Thanks for all that you do.
Jeff
Hi, I would like to have the following added:
XLX625 The BROniverse www.wa8bro.com
31264 p25.dudetronics.com:41000
If 31264 is not avail, next avail is fine, thanks!
-Doug AD8DP
Could you please add TG 50525 to the P25Hosts.txt file, 50525 will bridge to YSF, NXDN 50525 Reflectors & DMR TG50525
50525 50525.p25dvm.com 41000
Is there a means to set a repeater hang time? Specifically, I would like the repeater to keep transmitting for a few seconds after the user unkeys so the user knows if they keyed up the repeater.
Thanks in advance,
Michael AF6FB
Good morning
Please help me with a question:
How can a HBLink server (HB_YO_Romania for example) can be added to the permanent list?
Thank you
Catalin
YO3CAT
Hello,
This is my first time on Github and I am sorry if I asked in the wrong place.
Could you please add the following talk group to the P25Host list. My talk group is
52072 xlx727phuketdstar.ddns.net 41000
Thank you very much and 73
Phudit ngarmsaard, HS 2 ZY
ISP provider Changed My Static IP once again due to a conflict on their end.
Disregard the last IP address I sent.
New changes: 2/03/2020
Virginia
Talk Group 31161
24.49.15.69
Thank you and Sorry for the trouble!
Please add
22220 dagobah.hblink.it 41000
Is it possible to add a new Talk Group to the official list when it gets downloaded?
I have created a P25 reflector in which a group of us has been very active on in Virginia.
31161 24.53.67.238 41000
This talk group can be named Virginia
Thank You!
The Technology First p25 reflector TG 204 has been up dated.
Can you please change the p25 host file to:
w8ufo.ham shack.info port 41000
Many thanks
Hell, could you please add the following talk group to the P25Host file?
858 nz6d.dx40.com 41000
It has been up for several years now and I am just getting around to asking.
Than you,
David Griffith NZ6D
10216 Northeast Ohio:
10216 xlx216.km8v.com:41000
73
Have a question, How to add an audio connect message when someone connects to my P25 reflector?
Good evening
Please change the network port to 41003 for reflector P25 TG226
Thank you,
Catalin
YO3CAT
Good morning.
Please help me to add two reflectors:
P25:
2265 p25.dstar-yo.ro 41005 (Baia Mare YO5 P25 Network)
Thank you,
Catalin
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.