Shellen

General

Shellen is an interactive shellcoding environment. If you want a handy tool to write shellcodes, then shellen may be your friend. Also, it can be used just as assembly/disassembly tool.

It uses keystone and capstone engines for all provided operations.

Shellen works only on python3. Maybe it will be changed in the future.

Installing

You can install the stable version of shellen using pip3:

$ sudo pip3 install shellen

Or if you already have all required packages (see Requirements):

$ python3 setup.py install

If you have any trouble with installing keystone-engine, then you should compile it by yourself (see the COMPILE.md file in the keystone repository)

How to run:

After installing shellen and all its required packages, you can run shellen just by typing the next in your terminal:

$ shellen

There is the help command inside the tool, that will explain almost everything.

Features

Shellen was created for assembling and disassembling instructions, so there are two modes of using the tool: asm and dsm respectively. Of course, there are some other possibilities like syscalls tables, common shellcodes and other.

Problems/New features

If you find a problem/bug or something, then just write an issue about this problem. Also, if you think, that some feature will be nice to use in shellen, then do the same -- write an issue and I will try to add this feature.

Prompt

It also has a usefull prompt, displaying current mode, OS (Operating System for syscalls) and chosen architecture exactly for this mode. It looks as follows:

L:asm:x86_32 >

You can edit your input like you're typing in a terminal. Also, it has a history of commands (just type up arrow to see them).

L is the shortened name of Linux in the prompt. Below listed all other OS names:

L is Linux
W is Windows
M is MacOS

If you want to change OS, then type setos [linux/windows/macos] as follows:

L:asm:x86_32 > setos windows

[+] OS changed to windows.

To change current mode, enter asm or dsm in the prompt.

L:dsm:arm32 > asm

[+] Changed to asm (assembly) mode

L:asm:x86_32 > dsm

[+] Changed to dsm (disassembly) mode

L:dsm:arm32 >

Assembling

To assembly instuctions, type them separated by colons as follows:

L:asm:x86_32 > mov edx, eax; xor eax, eax; inc edx; int 80;
   [+] Bytes count: 7
       Raw bytes:  "\x89\xc2\x31\xc0\x42\xcd\x50"
       Hex string: "89c231c042cd50"

If your assembled bytes contain a null byte, then shellen will tell you about this.

Disassembling

It works exactly as assembling. Type your bytes in the input prompt and see the result!

L:dsm:x86_32 > 89c231c042cd50
        0x00080000:     mov     edx, eax
        0x00080002:     xor     eax, eax
        0x00080004:     inc     edx
        0x00080005:     int     0x50

Architectures

asm and dsm modes work for different architectures. To see a list of available architectures for a current mode, type this:

L:dsm:x86_32 > archs
┌────────┬────────┬─────────┬─────────┬────────┐
│        │        │         │         │        │
│ arm32  │ mips32 │ sparc32 │ systemz │ x86_16 │
│ arm64  │ mips64 │ sparc64 │         │ x86_32 │
│ arm_tb │        │         │         │ x86_64 │
└────────┴────────┴─────────┴─────────┴────────┘

And if you want to change current architecture, enter follow:

L:dsm:x86_32 > setarch arm32

[+] Architecture of dsm changed to arm32

Syscalls

It's apparent that in process of crafting a shellcode you will be needed syscalls. So, shellen will help you with that. Just type sys with a name of desired syscall and shellen will show you a list of possible syscalls you were looking for.

L:asm:x86_32 > sys open

┌────────┬───────┬──────────────────────┬──────────────────────┬──────────────┬──────────────┐
│ name   │ eax   │ ebx                  │ ecx                  │ edx          │ esi          │
├────────┼───────┼──────────────────────┼──────────────────────┼──────────────┼──────────────┤
│ open   │ 0x05  │ const char *filename │ int flags            │ umode_t mode │ -            │
│ openat │ 0x127 │ int dfd              │ const char *filename │ int flags    │ umode_t mode │
└────────┴───────┴──────────────────────┴──────────────────────┴──────────────┴──────────────┘

This prints possible variants of syscall depending on entered pattern. Syscall table for searching depends on chosen architecture and OS (Operating System). In this case it's x86_32 and Linux.

Common shellcodes

Shellen can show you a list of common shellcodes depending on your keyword. The example of using placed in Pictures section. It uses API of shell-storm.org site (thanks to the author!). You can use it like this:

L:asm:x86_32 > shell <keyword> <count>

Actually, count parameter isn't required.

Operating Systems

It was assumed that there will be several OSs (Linux, Windows and MacOS), but right now supported only Linux. If you want to add functionality for Windows or MacOS, then write an issue and I will add it.

Base commands

Command	Description
`clear`	Clear the terminal screen. As usual `cls` on Windows or `clear` on *nix systems.
`help`	Show the help message.
`quit,q,exit`	Finish the current session and quit

Requirements

TODO

Assembling
Disassembling
Syscalls lists
Database of common shellcodes

Pictures

Just a little bunch of pictures. (They are outdated because of adding different features)

gavz / shellen Goto Github PK

shellen's Introduction