This the term 1 - term 2 NXT robot assigment.
All motors on on ports A and B Light (refected) on port 1 and sonar on port 2
automated-movment is code that needs a light sensor on port 1 and follows a black line by going back and forth.
We started working on part 2 first becuase it was the easier task. Our first disgn had the basic code of stay on black and if it detects white it turns till it detects black. The problems with this is that it turns in one direction till it sees black; do it would wrap around and go backwards on the line it just traced. So, we changed the code so when it's on the black it turns left, and when on white it turns right. This code worked and it worked becuase it would always go up and down around the edge of the line, so even when the line turns it will still follow the edge.
#pragma config(Sensor, S1, light, sensorLightActive)
/*Light on porn 1*/
task main()
{
nMotorEncoder[motorA] = 0;
nMotorEncoder[motorB] = 0;
while (nMotorEncoder[motorA] < 1800 && nMotorEncoder[motorB] < 1800){
if (SensorValue(light) > 35){
motor[motorB] = -15;
motor[motorA] = 0;
}
else
{
motor[motorB] = 0;
motor[motorA] = -15;
}
};
motor[motorA] = 0;
motor[motorB] = 0;
}First with the C compiler (with the RobotC libaries) new lines charters (/n or enter) don't count for new code; that's why we need to add the ';' to the end of the commands to add code, else the compiler thinks it another command. Also the C compiler is known for being very needed and does not like code that does not follow the proper code form (like html and javascript). Also because of the rule of semicollens that tabs (or /t) does not change the code but it does make it easier to read and understand so white space does not matter in the code like in python. But in the code we first set some vaibels to look for the senors (maily light) we then declear the wheels and there rotations; so that we can tell if we are just going in circles. We then have the light sensor see if there is blakc or white; it white turn left and if black turn right (so we follow the edge of the line) becuase most people follow the black line and avoid the blakc so they go in a circle. But our code follows the edge so we always stay on the line and also can change to any angle or curive in the track; thats the advantage of not making asumssions and making fexible code.
a robot that uses light (on port 1) and sonar (on port 2) and follows and attacks robots using sonar, when the sonar picks up a robot it will charge the robot.
#pragma config(Sensor, S1, light, sensorLightActive)
/*Light on porn 1*/
#pragma config(Sensor, S2, sonar, sensorSONAR)
/*Sonar on port 2*/
task main()
{
while(true){
while(light < 50 /*White*/){
motor[motorA] = 100; /*Turn*/
wait1Msec(400);
}
motor[motorA] = -100;
motor[motorB] = -100;
if(sonar > 30){
stopMotor[motorA]
stopMotor[motorB]
motor[motorA] = -100;
motor[motorB] = -100;
}
else{
nMotorEncoder[motorA] = 0;
nMotorEncoder[motorB] = 0;
if (nMotorEncoder[motorA] < 1800){
motor[motorB] = -15;
motor[motorA] = 0;
}
if (nMotorEncoder[motorB] < 1800)
{
motor[motorB] = 0;
motor[motorA] = -15;
}
}
}In this code we see some of the C syntax with the RobotC mainly with the motor function that calls the amount of movment and roations that measures the roations from the light and edge detection. We just tried to add sonor sensor and when its detects another object in 30cm it moves foward and tries to change the other robots. So this code is very simmilar to the light code (because we had to detect the edge of the arrena). We could of fixed the code with getting the light code and if it detects white it goes and finds the robot using the tracking code. But the sonor senor was buggy and did not like how we detected objects.
We did not work will in the begining; but we then started to work better in a team. Then we designed our robots and they worked. Our main success was with the code. Our coding helped this a lot and was very invative.
Our challenges were not working at a team in the begining; this stopped our progress in the beging but when we started working it was great. Out other problems were with the sensors and that most of the time the conditions changed (ambient light would mess with the light sensor) and the sonor sensor just failed. We also wasted about 1/3 of our time with making the robot and more time fixing the bugs and problems with the robot.
We could of fixed the light problem with a constant varible that ditected the light and black at set the vaibles acordingly. But I think that could of fixed the light; and the sonsor we could of read more of the documentation to fix the problems. The main thing we need to fixed we not wasting time designing and working better as a team.
We mainly learned how with robots (and the outside world) change and how our code needs to be felxable and not setting dirct numbers but varibles that change with the outside world.
We were successful in coding as it was our main strengths. At the end of the task we work like a team.
We did well at coding the robot but had some difficulties such as sonar sensor and dirty carpet and the lighting of the sealing. WE also had some default in the design of the robot as it was hard for the light sensor to work (function properly, the senor sensor did not work for some reason which might be a bug or the code.
Less time building on the robot would improve our code. Coding it more sufficient will allow to work better.
It has taught me to code in a different way. (while true) This task also taught me resilience and confidence These skills are vital to reach a higher mark in my next assessment.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent