gonium / gosdm630 Goto Github PK
View Code? Open in Web Editor NEWAn interface for the Eastron SDM/Modbus smart meter series.
License: BSD 3-Clause "New" or "Revised" License
gosdm630's People
Contributors
Stargazers
Watchers
Forkers
mysmartgrid thecount mitnicki mreschka driemekasten piranik aleonnet e-swissolar dejandundjerski 34by151 csirek jangocheng lsw271 sames pmtabe1 alkhatebgosdm630's Issues
since latest commit realtime view not working anymore
i was on a version below 0.5 and all was fine - than i did a git pull and updated to the latest commit's today now my system ist not starting because of the changed -d parameter - i figured this out but i still do not get data in the realtime view - so i tried the sdm detect:
pi@rasp-eg-verteilerkasten ~ $ gosdm630/bin/sdm_detect
2017/10/26 09:05:00 Starting bus scan
2017/10/26 09:05:00 Device 1: SDM type device found, L1 voltage: [%!f(uint8=67) %!f(uint8=102) %!f(uint8=28) %!f(uint8=153)]
this looks already a bit strange?
if i start the http process i receive:
/home/pi/gosdm630/bin/sdm630_httpd -s /dev/rs485 -d sdm:1 -c 2 -f HolliHausGesamt[id-%d]
2017/10/26 08:58:14 Starting API httpd at :8080
2017/10/26 08:59:21 Device 1 failed to respond - retry attempt 1 of 5
2017/10/26 09:03:41 Device 1 failed to respond - retry attempt 1 of 5
2017/10/26 09:03:45 Device 1 failed to respond - retry attempt 1 of 5
if i start in verbose mode it looks like data is received - even if i do my rest call i get data - only the webview is not showing anything?
pi@rasp-eg-verteilerkasten ~ $ /home/pi/gosdm630/bin/sdm630_httpd -s /dev/rs485 -d sdm:1 -c 2 -f HolliHausGesamt[id-%d] -v
2017/10/26 09:12:44 Connecting to RTU via /dev/rs485, 9600 8N1
2017/10/26 09:12:44 Starting API httpd at :8080
2017/10/26 09:12:44 SubscriptionManager: Starting run.
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x00\x00\x02q\xcb"
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 43 67 66 36 f4 69
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x02\x00\x02\xd0\v"
2017/10/26 09:12:44 Creating new eventBuffer for category: meterupdate
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964398 meterupdate DevID: 1, FunCode: 4, Opcode 0: Value: 231.399}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V NaNA NaNW NaNcos | L2: NaNV NaNA NaNW NaNcos | L3: NaNV NaNA NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 43 62 80 96 ae 70
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x04\x00\x020\n"
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V NaNA NaNW NaNcos | L2: 226.50V NaNA NaNW NaNcos | L3: NaNV NaNA NaNW NaNcos
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964429 meterupdate DevID: 1, FunCode: 4, Opcode 2: Value: 226.502}.
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 43 65 9f 8b d7 88
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x06\x00\x02\x91\xca"
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V NaNA NaNW NaNcos | L2: 226.50V NaNA NaNW NaNcos | L3: 229.62V NaNA NaNW NaNcos
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964463 meterupdate DevID: 1, FunCode: 4, Opcode 4: Value: 229.623}.
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 41 09 83 03 1e 8b
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\b\x00\x02\xf0\t"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964496 meterupdate DevID: 1, FunCode: 4, Opcode 6: Value: 8.594}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A NaNW NaNcos | L2: 226.50V NaNA NaNW NaNcos | L3: 229.62V NaNA NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 40 ea 25 7f 94 c0
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\n\x00\x02Q\xc9"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964530 meterupdate DevID: 1, FunCode: 4, Opcode 8: Value: 7.317}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A NaNW NaNcos | L2: 226.50V 7.32A NaNW NaNcos | L3: 229.62V NaNA NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 40 4d 12 4f 33 07
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\f\x00\x02\xb1\xc8"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964564 meterupdate DevID: 1, FunCode: 4, Opcode a: Value: 3.204}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A NaNW NaNcos | L2: 226.50V 7.32A NaNW NaNcos | L3: 229.62V 3.20A NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 44 ec cb 81 b9 d1
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x0e\x00\x02\x10\b"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964595 meterupdate DevID: 1, FunCode: 4, Opcode c: Value: 1894.359}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W NaNcos | L2: 226.50V 7.32A NaNW NaNcos | L3: 229.62V 3.20A NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 44 bd 58 6b 05 7f
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964628 meterupdate DevID: 1, FunCode: 4, Opcode e: Value: 1514.763}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W NaNcos | L2: 226.50V 7.32A 1514.76W NaNcos | L3: 229.62V 3.20A NaNW NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x10\x00\x02p\x0e"
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 43 f3 2a a6 81 29
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\x1e\x00\x02\x11\xcd"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964660 meterupdate DevID: 1, FunCode: 4, Opcode 10: Value: 486.333}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W NaNcos | L2: 226.50V 7.32A 1514.76W NaNcos | L3: 229.62V 3.20A 486.33W NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 3f 73 d9 6b 1c 34
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00 \x00\x02p\x01"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964697 meterupdate DevID: 1, FunCode: 4, Opcode 1e: Value: 0.953}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W NaNcos | L3: 229.62V 3.20A 486.33W NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 3f 69 fa 12 e5 21
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00\"\x00\x02\xd1\xc1"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964733 meterupdate DevID: 1, FunCode: 4, Opcode 20: Value: 0.914}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W NaNcos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 3f 29 36 73 70 1d
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01Z\x00\x02P$"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964768 meterupdate DevID: 1, FunCode: 4, Opcode 22: Value: 0.661}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 44 ab 44 08 ac 52
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01\\\x00\x02\xb0%"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964804 meterupdate DevID: 1, FunCode: 4, Opcode 15a: Value: 1370.126}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 45 49 00 14 3f 51
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01^\x00\x02\x11\xe5"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964840 meterupdate DevID: 1, FunCode: 4, Opcode 15c: Value: 3216.005}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 45 31 1a 8f f5 83
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x00H\x00\x02\xf1\xdd"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964877 meterupdate DevID: 1, FunCode: 4, Opcode 15e: Value: 2833.660}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 45 e7 de 54 06 e0
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01`\x00\x02p)"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964911 meterupdate DevID: 1, FunCode: 4, Opcode 48: Value: 7419.791}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01b\x00\x02\xd1\xe9"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964947 meterupdate DevID: 1, FunCode: 4, Opcode 160: Value: 0.000}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:44 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:44 modbus: sending "\x01\x04\x01d\x00\x021\xe8"
2017/10/26 09:12:44 SubscriptionManager: queued event: &{1509001964984 meterupdate DevID: 1, FunCode: 4, Opcode 162: Value: 0.000}.
2017/10/26 09:12:44 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:44+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00J\x00\x02P\x1d"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965021 meterupdate DevID: 1, FunCode: 4, Opcode 164: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xea\x00\x02P?"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965055 meterupdate DevID: 1, FunCode: 4, Opcode 4a: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 78 53 2c 53 70
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xec\x00\x02\xb0>"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965092 meterupdate DevID: 1, FunCode: 4, Opcode ea: Value: 3.880}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 99 4f 3f 4a 4b
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xee\x00\x02\x11\xfe"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965128 meterupdate DevID: 1, FunCode: 4, Opcode ec: Value: 4.791}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 99 4f 3f 4a 4b
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xf8\x00\x02\xf0:"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965170 meterupdate DevID: 1, FunCode: 4, Opcode ee: Value: 4.791}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 8a bc 6a 3f 41
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x00\x00\x02q\xcb"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965210 meterupdate DevID: 1, FunCode: 4, Opcode f8: Value: 4.335}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 43 67 66 36 f4 69
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x02\x00\x02\xd0\v"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965241 meterupdate DevID: 1, FunCode: 4, Opcode 0: Value: 231.399}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
2017/10/26 09:12:45 Creating new eventBuffer for category: statusupdate
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965265 statusupdate {"Starttime":"2017-10-26T09:12:44.259307176+02:00","UptimeSeconds":1.004781308,"Goroutines":12,"Memory":{"Alloc":2251944,"HeapAlloc":2251944},"Modbus":{"TotalModbusRequests":26,"ModbusRequestRatePerMinute":1552.5766528292143,"TotalModbusErrors":0,"ModbusErrorRatePerMinute":0},"ConfiguredMeters":[{"Id":1,"Type":"SDM","Status":"available"}]}
}.
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 43 62 80 96 ae 70
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x04\x00\x020\n"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965273 meterupdate DevID: 1, FunCode: 4, Opcode 2: Value: 226.502}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 43 65 9f 8b d7 88
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x06\x00\x02\x91\xca"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965305 meterupdate DevID: 1, FunCode: 4, Opcode 4: Value: 229.623}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 41 09 83 03 1e 8b
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\b\x00\x02\xf0\t"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965340 meterupdate DevID: 1, FunCode: 4, Opcode 6: Value: 8.594}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 ea 25 7f 94 c0
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\n\x00\x02Q\xc9"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965373 meterupdate DevID: 1, FunCode: 4, Opcode 8: Value: 7.317}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 4d 12 4f 33 07
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\f\x00\x02\xb1\xc8"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965407 meterupdate DevID: 1, FunCode: 4, Opcode a: Value: 3.204}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 44 ec cb 81 b9 d1
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x0e\x00\x02\x10\b"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965438 meterupdate DevID: 1, FunCode: 4, Opcode c: Value: 1894.359}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1514.76W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 44 bc 5b 12 95 ad
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x10\x00\x02p\x0e"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965470 meterupdate DevID: 1, FunCode: 4, Opcode e: Value: 1506.846}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 486.33W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 43 f4 02 70 af 76
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\x1e\x00\x02\x11\xcd"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965501 meterupdate DevID: 1, FunCode: 4, Opcode 10: Value: 488.019}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 3f 73 e3 0c 4f 7e
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00 \x00\x02p\x01"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965538 meterupdate DevID: 1, FunCode: 4, Opcode 1e: Value: 0.953}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 3f 69 cc 0f 32 88
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\"\x00\x02\xd1\xc1"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965574 meterupdate DevID: 1, FunCode: 4, Opcode 20: Value: 0.913}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 3f 29 a5 69 9d 26
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01Z\x00\x02P$"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965611 meterupdate DevID: 1, FunCode: 4, Opcode 22: Value: 0.663}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 44 ab 44 10 ac 58
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01\\\x00\x02\xb0%"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965648 meterupdate DevID: 1, FunCode: 4, Opcode 15a: Value: 1370.127}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 45 49 00 19 fe 94
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01^\x00\x02\x11\xe5"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965685 meterupdate DevID: 1, FunCode: 4, Opcode 15c: Value: 3216.006}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 45 31 1a 93 f4 4a
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00H\x00\x02\xf1\xdd"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965721 meterupdate DevID: 1, FunCode: 4, Opcode 15e: Value: 2833.661}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 45 e7 de 5a 87 24
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965754 meterupdate DevID: 1, FunCode: 4, Opcode 48: Value: 7419.794}.
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01`\x00\x02p)"
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01b\x00\x02\xd1\xe9"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965791 meterupdate DevID: 1, FunCode: 4, Opcode 160: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x01d\x00\x021\xe8"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965828 meterupdate DevID: 1, FunCode: 4, Opcode 162: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00J\x00\x02P\x1d"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965864 meterupdate DevID: 1, FunCode: 4, Opcode 164: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xea\x00\x02P?"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965897 meterupdate DevID: 1, FunCode: 4, Opcode 4a: Value: 0.000}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 78 53 2c 53 70
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xec\x00\x02\xb0>"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965934 meterupdate DevID: 1, FunCode: 4, Opcode ea: Value: 3.880}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:45 modbus: received 01 04 04 40 99 4f 3f 4a 4b
RTUClientHandler: 2017/10/26 09:12:45 modbus: sending "\x01\x04\x00\xee\x00\x02\x11\xfe"
2017/10/26 09:12:45 SubscriptionManager: queued event: &{1509001965971 meterupdate DevID: 1, FunCode: 4, Opcode ec: Value: 4.791}.
2017/10/26 09:12:45 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:45+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 99 4f 3f 4a 4b
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966013 meterupdate DevID: 1, FunCode: 4, Opcode ee: Value: 4.791}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\xf8\x00\x02\xf0:"
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 8a bc 6a 3f 41
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x00\x00\x02q\xcb"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966053 meterupdate DevID: 1, FunCode: 4, Opcode f8: Value: 4.335}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 67 66 36 f4 69
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x02\x00\x02\xd0\v"
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966084 meterupdate DevID: 1, FunCode: 4, Opcode 0: Value: 231.399}.
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 62 80 96 ae 70
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x04\x00\x020\n"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966117 meterupdate DevID: 1, FunCode: 4, Opcode 2: Value: 226.502}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 65 9f 8b d7 88
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x06\x00\x02\x91\xca"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966164 meterupdate DevID: 1, FunCode: 4, Opcode 4: Value: 229.623}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.59A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 41 0a 0f 70 cb ae
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\b\x00\x02\xf0\t"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966197 meterupdate DevID: 1, FunCode: 4, Opcode 6: Value: 8.629}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1894.36W 0.95cos | L2: 226.50V 7.32A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 e9 19 b2 b4 55
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\n\x00\x02Q\xc9"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966231 meterupdate DevID: 1, FunCode: 4, Opcode 8: Value: 7.284}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1894.36W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.20A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 4d 42 ed 8e be
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\f\x00\x02\xb1\xc8"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966265 statusupdate {"Starttime":"2017-10-26T09:12:44.259307176+02:00","UptimeSeconds":2.006183716,"Goroutines":12,"Memory":{"Alloc":2318992,"HeapAlloc":2318992},"Modbus":{"TotalModbusRequests":54,"ModbusRequestRatePerMinute":1615.006628834585,"TotalModbusErrors":0,"ModbusErrorRatePerMinute":0},"ConfiguredMeters":[{"Id":1,"Type":"SDM","Status":"available"}]}
}.
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966266 meterupdate DevID: 1, FunCode: 4, Opcode a: Value: 3.207}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1894.36W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 44 ed c6 7b 6c c2
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x0e\x00\x02\x10\b"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966298 meterupdate DevID: 1, FunCode: 4, Opcode c: Value: 1902.203}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 44 bc 5b 12 95 ad
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x10\x00\x02p\x0e"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966328 meterupdate DevID: 1, FunCode: 4, Opcode e: Value: 1506.846}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 f4 02 70 af 76
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x1e\x00\x02\x11\xcd"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966361 meterupdate DevID: 1, FunCode: 4, Opcode 10: Value: 488.019}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 3f 73 e3 0c 4f 7e
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00 \x00\x02p\x01"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966396 meterupdate DevID: 1, FunCode: 4, Opcode 1e: Value: 0.953}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 3f 69 cc 0f 32 88
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\"\x00\x02\xd1\xc1"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966432 meterupdate DevID: 1, FunCode: 4, Opcode 20: Value: 0.913}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 3f 29 9c a3 0f 21
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01Z\x00\x02P$"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966468 meterupdate DevID: 1, FunCode: 4, Opcode 22: Value: 0.663}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 44 ab 44 10 ac 58
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01\\\x00\x02\xb0%"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966505 meterupdate DevID: 1, FunCode: 4, Opcode 15a: Value: 1370.127}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 45 49 00 19 fe 94
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01^\x00\x02\x11\xe5"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966542 meterupdate DevID: 1, FunCode: 4, Opcode 15c: Value: 3216.006}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 45 31 1a 93 f4 4a
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00H\x00\x02\xf1\xdd"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966578 meterupdate DevID: 1, FunCode: 4, Opcode 15e: Value: 2833.661}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 45 e7 de 5a 87 24
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01`\x00\x02p)"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966612 meterupdate DevID: 1, FunCode: 4, Opcode 48: Value: 7419.794}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01b\x00\x02\xd1\xe9"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966649 meterupdate DevID: 1, FunCode: 4, Opcode 160: Value: 0.000}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x01d\x00\x021\xe8"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966686 meterupdate DevID: 1, FunCode: 4, Opcode 162: Value: 0.000}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00J\x00\x02P\x1d"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966723 meterupdate DevID: 1, FunCode: 4, Opcode 164: Value: 0.000}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\xea\x00\x02P?"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966756 meterupdate DevID: 1, FunCode: 4, Opcode 4a: Value: 0.000}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 4a 1e ac c6 4f
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\xec\x00\x02\xb0>"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966793 meterupdate DevID: 1, FunCode: 4, Opcode ea: Value: 3.158}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 3f 7e 89 bb b0 6b
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\xee\x00\x02\x11\xfe"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966830 meterupdate DevID: 1, FunCode: 4, Opcode ec: Value: 0.994}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 3f 7e 89 bb b0 6b
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\xf8\x00\x02\xf0:"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966868 meterupdate DevID: 1, FunCode: 4, Opcode ee: Value: 0.994}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 40 04 e0 8d 26 20
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x00\x00\x02q\xcb"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966908 meterupdate DevID: 1, FunCode: 4, Opcode f8: Value: 2.076}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 67 66 36 f4 69
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x02\x00\x02\xd0\v"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966939 meterupdate DevID: 1, FunCode: 4, Opcode 0: Value: 231.399}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:46 modbus: received 01 04 04 43 62 80 96 ae 70
RTUClientHandler: 2017/10/26 09:12:46 modbus: sending "\x01\x04\x00\x04\x00\x020\n"
2017/10/26 09:12:46 SubscriptionManager: queued event: &{1509001966972 meterupdate DevID: 1, FunCode: 4, Opcode 2: Value: 226.502}.
2017/10/26 09:12:46 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:46+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 43 65 9f 8b d7 88
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\x06\x00\x02\x91\xca"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967008 meterupdate DevID: 1, FunCode: 4, Opcode 4: Value: 229.623}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 41 0a 0d c5 0b 79
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\b\x00\x02\xf0\t"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967042 meterupdate DevID: 1, FunCode: 4, Opcode 6: Value: 8.628}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.28A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 40 e6 97 ac 61 fe
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967076 meterupdate DevID: 1, FunCode: 4, Opcode 8: Value: 7.206}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.21A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\n\x00\x02Q\xc9"
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 40 4d 33 ae eb 1f
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\f\x00\x02\xb1\xc8"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967111 meterupdate DevID: 1, FunCode: 4, Opcode a: Value: 3.206}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.20W 0.95cos | L2: 226.50V 7.21A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 44 ed c5 f5 ec 56
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\x0e\x00\x02\x10\b"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967141 meterupdate DevID: 1, FunCode: 4, Opcode c: Value: 1902.186}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1506.85W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 44 ba 11 2b 82 de
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\x10\x00\x02p\x0e"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967174 meterupdate DevID: 1, FunCode: 4, Opcode e: Value: 1488.536}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 488.02W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 43 f3 e5 3e d5 73
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\x1e\x00\x02\x11\xcd"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967206 meterupdate DevID: 1, FunCode: 4, Opcode 10: Value: 487.791}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 3f 73 e5 9b 0d 70
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00 \x00\x02p\x01"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967243 meterupdate DevID: 1, FunCode: 4, Opcode 1e: Value: 0.953}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967266 statusupdate {"Starttime":"2017-10-26T09:12:44.259307176+02:00","UptimeSeconds":3.007066973,"Goroutines":12,"Memory":{"Alloc":2389288,"HeapAlloc":2389288},"Modbus":{"TotalModbusRequests":83,"ModbusRequestRatePerMinute":1656.098798169335,"TotalModbusErrors":0,"ModbusErrorRatePerMinute":0},"ConfiguredMeters":[{"Id":1,"Type":"SDM","Status":"available"}]}
}.
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 3f 69 78 21 c5 94
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\"\x00\x02\xd1\xc1"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967280 meterupdate DevID: 1, FunCode: 4, Opcode 20: Value: 0.912}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 3f 29 9c a3 0f 21
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01Z\x00\x02P$"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967317 meterupdate DevID: 1, FunCode: 4, Opcode 22: Value: 0.663}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 44 ab 44 10 ac 58
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01\\\x00\x02\xb0%"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967355 meterupdate DevID: 1, FunCode: 4, Opcode 15a: Value: 1370.127}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 45 49 00 19 fe 94
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01^\x00\x02\x11\xe5"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967392 meterupdate DevID: 1, FunCode: 4, Opcode 15c: Value: 3216.006}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 45 31 1a 93 f4 4a
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00H\x00\x02\xf1\xdd"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967429 meterupdate DevID: 1, FunCode: 4, Opcode 15e: Value: 2833.661}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 45 e7 de 5e 86 e7
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01`\x00\x02p)"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967463 meterupdate DevID: 1, FunCode: 4, Opcode 48: Value: 7419.796}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01b\x00\x02\xd1\xe9"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967500 meterupdate DevID: 1, FunCode: 4, Opcode 160: Value: 0.000}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x01d\x00\x021\xe8"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967538 meterupdate DevID: 1, FunCode: 4, Opcode 162: Value: 0.000}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00J\x00\x02P\x1d"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967574 meterupdate DevID: 1, FunCode: 4, Opcode 164: Value: 0.000}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 00 00 00 00 fb 84
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\xea\x00\x02P?"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967608 meterupdate DevID: 1, FunCode: 4, Opcode 4a: Value: 0.000}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 40 4a 1e ac c6 4f
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\xec\x00\x02\xb0>"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967646 meterupdate DevID: 1, FunCode: 4, Opcode ea: Value: 3.158}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
RTUClientHandler: 2017/10/26 09:12:47 modbus: received 01 04 04 3f 7e 89 bb b0 6b
RTUClientHandler: 2017/10/26 09:12:47 modbus: sending "\x01\x04\x00\xee\x00\x02\x11\xfe"
2017/10/26 09:12:47 SubscriptionManager: queued event: &{1509001967683 meterupdate DevID: 1, FunCode: 4, Opcode ec: Value: 0.994}.
2017/10/26 09:12:47 UniqueId: HolliHausGesamt[id-1] ID: 1 T: 2017-10-26T09:12:47+02:00 - L1: 231.40V 8.63A 1902.19W 0.95cos | L2: 226.50V 7.21A 1488.54W 0.91cos | L3: 229.62V 3.21A 487.79W 0.66cos
^C
any idea?
thanks
holli
GB Build Tool install error on RPi 3
Hi Mathias,
Great work you have done here with SDM630 meter.
I also got the Eastron SDM630-MODBUS +RS485 USB adapter (+,- port ).
USB adapter: http://www.ebay.de/itm/like/201548792231?lpid=106&chn=ps&ul_noapp=true
I am trying too install your code in my Raspberry pi 3. But while trying to install the 'GB build tool' using
"make dep"
command or
"go get github.com/constabulary/gb/..." command,
i encounter the following error:
##############################################################
pi@logger ~ $ cd tmtr/gosdm630
pi@logger ~/tmtr/gosdm630 $ sudo -s
root@logger:/home/pi/tmtr/gosdm630# make dep
make: Warning: File 'Makefile' has modification time 534336 s in the future
Installing GB build tool
github.com/constabulary/gb/internal/untar
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/untar/untar.go:37: function ends without a return statement
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/untar/untar.go:53: function ends without a return statement
github.com/constabulary/gb/internal/depfile
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/depfile/depfile.go:43: undefined: bufio.NewScanner
github.com/constabulary/gb/cmd/gb/internal/match
/usr/lib/go/src/pkg/github.com/constabulary/gb/cmd/gb/internal/match/match.go:76: function ends without a return statement
github.com/constabulary/gb/internal/vendor
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/vendor/depset.go:92: undefined: build.ImportComment
Makefile:15: recipe for target 'dep' failed
make: *** [dep] Error 2
root@logger:/home/pi/tmtr/gosdm630# exit
#####################################################################
pi@logger ~/tmtr/gosdm630 $ sudo -s
root@logger:/home/pi/tmtr/gosdm630# go get github.com/constabulary/gb/...
github.com/constabulary/gb/internal/untar
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/untar/untar.go:37: function ends without a return statement
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/untar/untar.go:53: function ends without a return statement
github.com/constabulary/gb/internal/depfile
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/depfile/depfile.go:43: undefined: bufio.NewScanner
github.com/constabulary/gb/cmd/gb/internal/match
/usr/lib/go/src/pkg/github.com/constabulary/gb/cmd/gb/internal/match/match.go:76: function ends without a return statement
github.com/constabulary/gb/internal/vendor
/usr/lib/go/src/pkg/github.com/constabulary/gb/internal/vendor/depset.go:92: undefined: build.ImportComment
root@logger:/home/pi/tmtr/gosdm630#
######################################################################
I would be really grateful if you can let me know what may be the problem.
Also for the Hardware side i have connected the RS-485 USB adapter's (+) side to pin 9(A) and (-) side to pin 10(B) of the sdm630-Modbus meter.
And do you think USB adapter which i am using will work without the resistors ?
Thank you so much again for your help.
Unpublish homie meters/nodes/properties when closing
...otherwise retained MQTT topics will remain behind. Affects current dev version.
[RFC] refactor meter opcode definitions
Currently, a lot of code is used to define meter opcodes (query snips). This could be greatly reduced by specifying standard "opcodes" and define its mapping register per meter. The approach could use e.g. simple structures like this:
iec61850 := map[string]string{
"VolLocPhsA": "L1 Voltage (V)",
"VolLocPhsB": "L2 Voltage (V)",
"VolLocPhsC": "L3 Voltage (V)",
"AmpLocPhsA": "L1 Current (A)",
"AmpLocPhsB": "L2 Current (A)",
"AmpLocPhsC": "L3 Current (A)",
"WLocPhsA": "L1 Power (W)",
"WLocPhsB": "L2 Power (W)",
"WLocPhsC": "L3 Power (W)",
"AngLocPhsA": "L1 Cosphi",
"AngLocPhsB": "L2 Cosphi",
"AngLocPhsC": "L3 Cosphi",
"TotkWhImportPhsA": "L1 Import (kWh)",
"TotkWhImportPhsB": "L2 Import (kWh)",
"TotkWhImportPhsC": "L3 Import (kWh)",
"TotkWhImport": "Total Import (kWh)",
"TotkWhExportPhsA": "L1 Export (kWh)",
"TotkWhExportPhsB": "L2 Export (kWh)",
"TotkWhExportPhsC": "L3 Export (kWh)",
"TotkWhExport": "Total Export (kWh)",
"ThdVolPhsA": "L1 Voltage to neutral THD (%)",
"ThdVolPhsB": "L2 Voltage to neutral THD (%)",
"ThdVolPhsC": "L3 Voltage to neutral THD (%)",
"ThdVol": "Average voltage to neutral THD (%)",
"Freq": "Frequency of supply voltages",
}
fmt.Println(iec61850)
Meter definitions would look like this:
sdm := map[string]int{
"L1Voltage": 0x0000,
"L2Voltage": 0x0002,
"L3Voltage": 0x0004,
"L1Current": 0x0006,
"L2Current": 0x0008,
"L3Current": 0x000A,
"L1Power": 0x000C,
"L2Power": 0x000E,
"L3Power": 0x0010,
"L1Import": 0x015a,
"L2Import": 0x015c,
"L3Import": 0x015e,
"TotalImport": 0x0048,
"L1Export": 0x0160,
"L2Export": 0x0162,
"L3Export": 0x0164,
"TotalExport": 0x004a,
"L1Cosphi": 0x001e,
"L2Cosphi": 0x0020,
"L3Cosphi": 0x0022,
// "L1THDCurrent": 0x00F0,
// "L2THDCurrent": 0x00F2,
// "L3THDCurrent": 0x00F4,
// "AvgTHDCurrent": 0x00Fa,
"L1THDVoltageNeutral": 0x00ea,
"L2THDVoltageNeutral": 0x00ec,
"L3THDVoltageNeutral": 0x00ee,
"AvgTHDVoltageNeutral": 0x00F8,
"Frequency": 0x0046,
}
fmt.Println(sdm)
janitza := map[string]int{
"L1Voltage": 0x4A38,
"L2Voltage": 0x4A3A,
"L3Voltage": 0x4A3C,
"L1Current": 0x4A44,
"L2Current": 0x4A46,
"L3Current": 0x4A48,
"L1Power": 0x4A4C,
"L2Power": 0x4A4E,
"L3Power": 0x4A50,
"L1Import": 0x4A76,
"L2Import": 0x4A78,
"L3Import": 0x4A7A,
"TotalImport": 0x4A7C,
"L1Export": 0x4A7E,
"L2Export": 0x4A80,
"L3Export": 0x4A82,
"TotalExport": 0x4A84,
"L1Cosphi": 0x4A64,
"L2Cosphi": 0x4A66,
"L3Cosphi": 0x4A68,
}
fmt.Println(janitza)
Defining all QuerySnips per meter (Produce())would then be a simple matter of iterating over the struct.
I'd prefer to combine this with a single naming regime for opcodes. UI and APIs currently use IEC61850 (e.g. VolLocPhsA ), code internally relies on more speaking names like L1Voltage. My preference would be the latter for UI, API and source code.
If this is only applied to the new sdm630 daemon this could be considered a non-breaking change. Opinions welcome.
Divide by zero panic
Happened once now:
May 18 09:53:05 uv sdm[2955]: 2019/05/18 09:53:05 http: panic serving 192.168.0.41:33634: runtime error: invalid memory address or nil pointer dereference
May 18 09:53:05 uv sdm[2955]: goroutine 3830853 [running]:
May 18 09:53:05 uv sdm[2955]: net/http.(*conn).serve.func1(0x25aacc0)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:1746 +0x9c
May 18 09:53:05 uv sdm[2955]: panic(0x3853a0, 0x6dc720)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/runtime/panic.go:513 +0x194
May 18 09:53:05 uv sdm[2955]: github.com/gonium/gosdm630.(*Readings).divide(0x0, 0x0, 0x0, 0x0)
May 18 09:53:05 uv sdm[2955]: /home/pi/gosdm/datagram.go:169 +0x18
May 18 09:53:05 uv sdm[2955]: github.com/gonium/gosdm630.(*ReadingSlice).Average(0x2441b68, 0x3e8, 0x492, 0x5e3fa2b3)
May 18 09:53:05 uv sdm[2955]: /home/pi/gosdm/datagram.go:286 +0xa8
May 18 09:53:05 uv sdm[2955]: github.com/gonium/gosdm630.(*MeasurementCache).GetMinuteAvg(0x2418100, 0x6f4901, 0x2, 0x8, 0x25aaea0)
May 18 09:53:05 uv sdm[2955]: /home/pi/gosdm/measurementcache.go:104 +0x110
May 18 09:53:05 uv sdm[2955]: github.com/gonium/gosdm630.MkLastMinuteAvgAllHandler.func1(0x468f50, 0x26cc990, 0x252eb00)
May 18 09:53:05 uv sdm[2955]: /home/pi/gosdm/http.go:127 +0xbc
May 18 09:53:05 uv sdm[2955]: github.com/gonium/gosdm630.serveJson.func1(0x468f50, 0x26cc990, 0x252eb00)
May 18 09:53:05 uv sdm[2955]: /home/pi/gosdm/http.go:166 +0xbc
May 18 09:53:05 uv sdm[2955]: net/http.HandlerFunc.ServeHTTP(0x253c188, 0x468f50, 0x26cc990, 0x252eb00)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:1964 +0x34
May 18 09:53:05 uv sdm[2955]: github.com/gorilla/mux.(*Router).ServeHTTP(0x251e1c0, 0x468f50, 0x26cc990, 0x252eb00)
May 18 09:53:05 uv sdm[2955]: /home/pi/.go/pkg/mod/github.com/gorilla/[email protected]/mux.go:162 +0xa8
May 18 09:53:05 uv sdm[2955]: github.com/gorilla/handlers.CompressHandlerLevel.func1(0x468f50, 0x26cc990, 0x252ea00)
May 18 09:53:05 uv sdm[2955]: /home/pi/.go/pkg/mod/github.com/gorilla/[email protected]/compress.go:146 +0x380
May 18 09:53:05 uv sdm[2955]: net/http.HandlerFunc.ServeHTTP(0x240c250, 0x468f50, 0x26cc990, 0x252ea00)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:1964 +0x34
May 18 09:53:05 uv sdm[2955]: net/http.serverHandler.ServeHTTP(0x252e200, 0x468f50, 0x26cc990, 0x252ea00)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:2741 +0x74
May 18 09:53:05 uv sdm[2955]: net/http.(*conn).serve(0x25aacc0, 0x469210, 0x24194c0)
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:1847 +0x58c
May 18 09:53:05 uv sdm[2955]: created by net/http.(*Server).Serve
May 18 09:53:05 uv sdm[2955]: /usr/local/go/src/net/http/server.go:2851 +0x290
Binary =/= 0.7.0
The binary from https://github.com/gonium/gosdm630/releases/download/v0.7.0/sdm630-linux-arm.zip recognize himself as 0.6.0:
http://localhost:8080/#about
This installation runs GoSDM630 version 0.6.0 (compiled with go1.11)
Issue #59 seems to be still a thing in this one:
pi@bananapi:~$ mosquitto_sub -h localhost -v -t sdm630/#
sdm630/status disconnected
sdm630/status connected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
sdm630/status disconnected
Add more DVG4013 features
The documentation seems to indicate that this meter supports more registers than currently implemented. It would be great to add those.
I would appreciate if anybody with a corresponding meter would get in contact.
Failed to connect: no such file or directory
using the arm release.
cant be started, it just throws Failed to connect: no such file or directory without any explanations
Building on RPi fails
Hej! I am trying to build the latest code on a RPi.
The following error I cannot resolve:
Version: 05a7865 2019-05-27_15:01:08
go build -v -ldflags '-X "sdm630.Version=05a7865" -X "sdm630.Commit=05a7865"' ./...
github.com/gonium/gosdm630/meters
# github.com/gonium/gosdm630/meters
meters/measurements.go:164:10: m.String undefined (type *Measurement has no field or method String)
meters/meter.go:91:55: iec.String undefined (type Measurement has no field or method String)
Makefile:20: die Regel für Ziel „binaries“ scheiterte
make: *** [binaries] Fehler 2
I tried two version of Go (1.11 & 1.12) and use the "make binaries" as golangci-lint seems to be unavailable on Arm.
Any suggestions?
Thanks a lot!
Implement MQTT discovery
Similar to john30/ebusd#224, add https://www.home-assistant.io/docs/mqtt/discovery/ and/or https://homieiot.github.io/
mqtt Power(Watt) total and 1messageblock every 30sec?
Hello,
i have 2 Question about your great v.0.6.0
- i use sdm630 with mqtt. imo mqtt stress my rasperry - is it possible to create one messageblock every 30sec or 1min?
- i miss WLocPhs total - please can you integrate this in mqtt?
Regards Tim
/Raspi/SDM630/Instrument1/WLocPhsA 115.479
/Raspi/SDM630/Instrument1/WLocPhsB 80.371
/Raspi/SDM630/Instrument1/WLocPhsC 167.294
/Raspi/SDM630/Instrument1/AngLocPhsA 0.717
/Raspi/SDM630/Instrument1/AngLocPhsB 0.538
/Raspi/SDM630/Instrument1/AngLocPhsC 0.988
/Raspi/SDM630/Instrument1/TotkWhImportPhsA 0.329
/Raspi/SDM630/Instrument1/TotkWhImportPhsB 0.548
/Raspi/SDM630/Instrument1/TotkWhImportPhsC 1.156
/Raspi/SDM630/Instrument1/TotkWhImport 2.033
Duplication of ID in Web API
After talking to @TheCount, I merged the pull request #5 conditionally. The pull requests introduces a UniqueID which can be used to identify Modbus Device and the gosdm630 instance. A commandline argument allows a user to specify a prefix. The Modbus ID of the attached device will then be appended to this prefix.
I understand the use case and like the idea of a user-specified "tag" for the gosdm630 instance. But the device ID is also present in the ModbusID field - a client could simply concatenate the two to generate the same information.
For the sake of keeping the API clean: Refactor this later so that the device ID is not appended to the UniqueID. The name of the field should also be changed to InstanceID. This needs to be revisited when @TheCount has more time.
precompiled 0.7.0 and 0.6.0 are the same (=0.6.09
As said, i did a fresh download of precompiled binary version 0.7.0 but at least sdm630_httpd inside presents itself as 0.6.0. Seems the packaging is wrong. And the filename did not reflect version.
Originally posted by @RubberDucky007 in #131 (comment)
SDM630: strange behaviour of /minuteavg vs /last
Looking at both APIs I see for my main meter that /last->TotalImport rarely changes while /minuteavg->TotalImport changes all the time when reloading the page. This does seem inconsistent?
High load on raspberry
I have a raspberry pi3 with two SDM630 attached via USB connector on one bus running at 9600 baud. When the http daemon is running the load is 0.65 when a single browser window is connected load is 1.25.
This seems rather high given that the pi3 is quite capable?
Support for Janitza B-Series Smart meter
Add support for the Janitza B-Series. There are two variants of these devices: one supports MBUS, the other one MODBUS/RTU. The documentation can be found here:
The register documentation starts on page 72 (of the German document). The meter provides no THD measurements.
TODO:
- Install test device
- Verify RTU packet with simple test program
- Create a new scheduler for the device
- rewrite device configuration code
Problem building from source
Thanks for gosdm360, trying to build from source.
When building from source ( go version go1.10.4 linux/amd64), it breaks with the following error
github.com/gonium/gosdm630/meters
../meters/measurements.go:126:10: m.String undefined (type *Measurement has no field or method String)
../meters/meter.go:91:55: iec.String undefined (type Measurement has no field or method String)
Makefile test target
It would be nice if the Makefile had a target to execute the go tests.
reports zero values on startup
When gosdm starts but has not read out all values from the modbus yet, the JSON entities corresponding to the unread values are zero. This can be confusing because zero might be a valid value. A better choice might be to leave out these entities, or give them a JSON value of null.
Add SDM120 meter type
As per mreschka@6c82a0b and mreschka@12dabdd
Add new precompiled release
can u please add precompiled version? all day im sitting with a raspberry pi, it just wont compile....
Need testers for Saia Burgess ALE3 implementation
Please comment this issue if you'd like to help and are already familiar with GoSDM.
Web frontend looses values if two browsers are open
To reproduce, open two browser windows. Some values are updated in one window, some in the other. They appear to be "stealing" from each other. This is probably related to the golongpoll caching functions.
Firehose: Change longpolling API to websockets
Websockets are more efficient (no renegotiation of an HTTP connection) and allow two-way communication. There are also C++ libraries that make writing other client implementations easy, e.g. BEAST websocket example.
Tool for MODBUS scanning
Create a tool that enumerates all valid MODBUS IDs and attempts to retrieve the L1 voltage from them. Print a list of valid devices and if they respond correctly to the console.
SMA Current not properly decoded
...since current is uint16 and currentl1..l3 is int16
Installation fails on Raspi / Debian stretch
pi@uv:~/gosdm630 $ sudo GOPATH=/usr/lib/go make dep
Installing GB build tool
Installing embed tool
# github.com/aprice/embed/loader
/usr/lib/go-1.7/src/github.com/aprice/embed/loader/fs.go:35: undefined: sort.Slice
Makefile:52: recipe for target 'dep' failed
make: *** [dep] Error 2
Wrong values with sdm530
I got an Digitus DA-70157 RS-485 Adapter and a Raspi 1b with volkszähler-latest and gosdm630 binary (V.6.0 shown) on an SDM530 Device. It seems to work technically but most of the readings are zero or Totally wrong.
It seems to me sdm630 reaches only the values from L1 an L2 and copies L2 to L3 values.
The total import kwh is doubled, the total Watts shown are L1+L2+L2 because the values on the Meter display are different to what sdm630 shows. I don't know what i can do to fix this. Need Help.
Run on the same machine with Apache web server
Hi. It's not an issue actually but an important (for me and someone like me) question: how to run sdm630_httpd when I already have Apache server up and running? Both of them use "localhost" served hostname so how can I call sdm630_httpd and not break my local smart home webserver?
Device 9 failed to respond - retry attempt 1 of 5
my SDM is device 9, when starting the webserver i got this every second:
2018/04/04 19:51:15 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:15 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:16 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:16 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:17 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:18 Device 9 failed to respond - retry attempt 1 of 5
2018/04/04 19:51:18 Device 9 failed to respond - retry attempt 1 of 5
precompiled binary, release 0.5.1
./sdm630_httpd-linux-arm -s /dev/ttyAMA0 -d sdm:9
Any ideas?
regards M.
SDM630: timestamp of last change?
If it were physically possible to read the timestamp of last change from the Modbus protocol it would be helpful to include this in the API output. Not the timestamp of the reading but the timestamp of the last meter-internal change.
Guidelines for contributions
We should provide guidelines for contributors. It should be a small document and help people to enjoy contributing.
It should include
- general goal of the project: lean & mean ;-)
- how to provide new features (issue first, then pull request)
- areas where contributions are needed
RS485 Board
Hi,
do you think that this
Raspberry Pi Shield - RS485-Schnittstelle for ~ 10€
or this
RS422 / RS485 Shield für Raspberry Pi for ~ 30€ or this
RS485 Pi
or this USB Stick
USB-RS485-Bridge mit Gehäuse 25€
would work too.
Grüße aus München
Enable travis build
Seems this repo has travis-ci config but it's not enabled for pull requests. Would be great to update the project settings.
GPIO to switch between RX/TX
As I am a little paranoid I wanted to have a galvanicaly isolated RS485 bus. (The ends in the SDM630 are very close to the hot wires...) I bought the only solution for the Raspberry Pi I could find: https://www.hwhardsoft.de/deutsch/projekte/rs485-shield/
NB: The FTDI seems to break the USB hub on the Raspberry Pi after some time.
The problem is the the auto send/receive control on this board is BS (as it's based on an NE555). I need to have GPIO 18 high for TX and low for RX, respectively.
Could you please add GPIO support for the Raspberry Pi to do this? Unfortunately, I have zero Go experience...
Thanks
raspi cannot read sdm when rs485 is 1st serial
searching some time for that, if you rs485 is the 1st serial in your raspi the kernel / init starts a console on it.
after that no real comminication with sdm is possible.
i had to remove the console serial stuff from /boot/cmdline.txt
Only for the docs
Output formatting broken?
Running from master:
pi@uv:~/gosdm630 $ bin/sdm_detect
2017/10/14 16:15:49 Starting bus scan
2017/10/14 16:15:49 Device 1: SDM type device found, L1 voltage: [%!f(uint8=67) %!f(uint8=98) %!f(uint8=159) %!f(uint8=179)]
2017/10/14 16:15:49 Device 2: SDM type device found, L1 voltage: [%!f(uint8=67) %!f(uint8=98) %!f(uint8=156) %!f(uint8=59)]
The voltages look mal-formatted.
Release 0.6.0 mqtt disconnected
Hi,
i use Release 0.6.0 with mqtt and it works - thanks... !
If i checked mqtt history and i can only find disconnected - i miss "connected"
Thanks!
Pi:~ $ mosquitto_sub -v -t "/Raspi/SDM630/status/#"
/Raspi/SDM630/status disconnected
/Raspi/SDM630/status disconnected
/Raspi/SDM630/status disconnected
/Raspi/SDM630/status disconnected
/Raspi/SDM630/status disconnected
/Raspi/SDM630/status disconnected
ModBus Adaptor error rate
Do you sell any of your homebrewed Modbus USB adaptors. I am running a setup with cheap USB-ones with no ground and get
"Modbus": {
"Requests": 8822,
"RequestsPerMinute": 1643.5757367508729,
"Errors": 61,
"ErrorsPerMinute": 11.364556783246798
Is this a normal number?
Frequency logging
Is there any technical reason not to log the line frequency?
A corresponding register is available.
What is the measurement rate/interval of an SDM630?
[RFC] performance improvements
On volkszaehler (volkszaehler/vzlogger#272 (comment)) it was mentioned that reading registers one by one is much slower than reading blockwise.
This leads to the following ideas for improving readout performance or lowering load:
- group device registers into groups that can be read at once
- refactor the mqtt
rateparameter (or add another one) to not limit pushing readings to mqtt but instead defer reading from device if rate is too high (NOTE: this would affect all consumers, not only mqtt)
detect broken on master
Discovered during #55
Connect few meters to one dongle
Is it possible to read two meters using same service ?
or using same converter?
or need to add two services?
Building GOSDM630: fs.go:35: undefined: sort.Slice
I get this error when running 'make dep' in the gosdm630 directory my RPi running latest Raspbian:
Installing GB build tool
Installing embed tool
github.com/aprice/embed/loader
../../../gopath/src/github.com/aprice/embed/loader/fs.go:35: undefined: sort.Slice
Makefile:52: recipe for target 'dep' failed
make: *** [dep] Error 2
I have no clue as the Go language is new to me. I did export the GOPATH env variable in my profile.
Control abort conditions
Currently, gosdm aborts after 5 consecutive failures. This is problematic in cases where several meters are connected to the bus, one of the meters fails, but one wants to continue logging data from the remaining meters.
It would therefore be nice if there was a flag/mode that, in case of one failure, would "forward" the scheduler to the next device ID in the hope that this device is still working.
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.