Near the end, errors occur.
pi@raspberrypi ~ $ wget https://raw.githubusercontent.com/gonzalo/gphoto2-updater/master/gphoto2-updater.sh && chmod +x gphoto2-updater.sh && sudo ./gphoto2-updater.sh
--2015-06-20 09:03:45-- https://raw.githubusercontent.com/gonzalo/gphoto2-updater/master/gphoto2-updater.sh
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 199.27.79.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|199.27.79.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4997 (4.9K) [text/plain]
Saving to: `gphoto2-updater.sh'
100%[=====================================================================>] 4,997 --.-K/s in 0.001s
2015-06-20 09:03:52 (6.32 MB/s) - `gphoto2-updater.sh' saved [4997/4997]
Updating sources
Hit http://archive.raspberrypi.org wheezy Release.gpg
Hit http://archive.raspberrypi.org wheezy Release
Hit http://archive.raspberrypi.org wheezy/main armhf Packages
Hit http://raspberrypi.collabora.com wheezy Release.gpg
Hit http://raspberrypi.collabora.com wheezy Release
Hit http://raspberrypi.collabora.com wheezy/rpi armhf Packages
Ign http://archive.raspberrypi.org wheezy/main Translation-en_US
Get:1 http://mirrordirector.raspbian.org wheezy Release.gpg [490 B]
Ign http://archive.raspberrypi.org wheezy/main Translation-en
Get:2 http://mirrordirector.raspbian.org wheezy Release [14.4 kB]
Get:3 http://mirrordirector.raspbian.org wheezy/main armhf Packages [6,903 kB]
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en_US
Ign http://raspberrypi.collabora.com wheezy/rpi Translation-en
Get:4 http://mirrordirector.raspbian.org wheezy/contrib armhf Packages [23.6 kB]
Get:5 http://mirrordirector.raspbian.org wheezy/non-free armhf Packages [49.3 kB]
Get:6 http://mirrordirector.raspbian.org wheezy/rpi armhf Packages [592 B]
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en_US
Ign http://mirrordirector.raspbian.org wheezy/contrib Translation-en
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en_US
Ign http://mirrordirector.raspbian.org wheezy/main Translation-en
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en_US
Ign http://mirrordirector.raspbian.org wheezy/non-free Translation-en
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en_US
Ign http://mirrordirector.raspbian.org wheezy/rpi Translation-en
Fetched 6,991 kB in 1min 11s (97.1 kB/s)
Reading package lists... Done
Removing gphoto2 if exists
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package 'gphoto2' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Installing dependencies
Reading package lists... Done
Building dependency tree
Reading state information... Done
bzip2 is already the newest version.
libexif-dev is already the newest version.
libltdl-dev is already the newest version.
libpopt-dev is already the newest version.
libusb-dev is already the newest version.
make is already the newest version.
make set to manually installed.
The following NEW packages will be installed:
libudev-dev
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 57.9 kB of archives.
After this operation, 361 kB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ wheezy/main libudev-dev armhf 175-7.2 [57.9 kB]
Fetched 57.9 kB in 1s (49.9 kB/s)
Selecting previously unselected package libudev-dev.
(Reading database ... 85391 files and directories currently installed.)
Unpacking libudev-dev (from .../libudev-dev_175-7.2_armhf.deb) ...
Setting up libudev-dev (175-7.2) ...
Creating temporary folder
gphoto2-temp-folder created
Downloading libusb 1.0.17
libusbx-1.0.17/
libusbx-1.0.17/android/
libusbx-1.0.17/android/config.h
libusbx-1.0.17/android/jni/
libusbx-1.0.17/android/jni/tests.mk
libusbx-1.0.17/android/jni/examples.mk
libusbx-1.0.17/android/jni/Application.mk
libusbx-1.0.17/android/jni/libusb.mk
libusbx-1.0.17/android/jni/Android.mk
libusbx-1.0.17/android/README
libusbx-1.0.17/COPYING
libusbx-1.0.17/libusb/
libusbx-1.0.17/libusb/sync.c
libusbx-1.0.17/libusb/io.c
libusbx-1.0.17/libusb/version_nano.h
libusbx-1.0.17/libusb/descriptor.c
libusbx-1.0.17/libusb/os/
libusbx-1.0.17/libusb/os/poll_posix.h
libusbx-1.0.17/libusb/os/wince_usb.c
libusbx-1.0.17/libusb/os/netbsd_usb.c
libusbx-1.0.17/libusb/os/threads_windows.c
libusbx-1.0.17/libusb/os/threads_windows.h
libusbx-1.0.17/libusb/os/poll_windows.h
libusbx-1.0.17/libusb/os/windows_usb.c
libusbx-1.0.17/libusb/os/linux_udev.c
libusbx-1.0.17/libusb/os/linux_netlink.c
libusbx-1.0.17/libusb/os/threads_posix.c
libusbx-1.0.17/libusb/os/darwin_usb.c
libusbx-1.0.17/libusb/os/darwin_usb.h
libusbx-1.0.17/libusb/os/poll_windows.c
libusbx-1.0.17/libusb/os/linux_usbfs.h
libusbx-1.0.17/libusb/os/threads_posix.h
libusbx-1.0.17/libusb/os/openbsd_usb.c
libusbx-1.0.17/libusb/os/linux_usbfs.c
libusbx-1.0.17/libusb/os/windows_common.h
libusbx-1.0.17/libusb/os/wince_usb.h
libusbx-1.0.17/libusb/os/windows_usb.h
libusbx-1.0.17/libusb/os/poll_posix.c
libusbx-1.0.17/libusb/version.h
libusbx-1.0.17/libusb/Makefile.in
libusbx-1.0.17/libusb/Makefile.am
libusbx-1.0.17/libusb/libusbi.h
libusbx-1.0.17/libusb/hotplug.c
libusbx-1.0.17/libusb/core.c
libusbx-1.0.17/libusb/hotplug.h
libusbx-1.0.17/libusb/libusb.h
libusbx-1.0.17/libusb/libusb-1.0.def
libusbx-1.0.17/libusb/libusb-1.0.rc
libusbx-1.0.17/libusb/strerror.c
libusbx-1.0.17/ChangeLog
libusbx-1.0.17/examples/
libusbx-1.0.17/examples/dpfp.c
libusbx-1.0.17/examples/sam3u_benchmark.c
libusbx-1.0.17/examples/ezusb.c
libusbx-1.0.17/examples/xusb.c
libusbx-1.0.17/examples/Makefile.in
libusbx-1.0.17/examples/listdevs.c
libusbx-1.0.17/examples/dpfp_threaded.c
libusbx-1.0.17/examples/ezusb.h
libusbx-1.0.17/examples/Makefile.am
libusbx-1.0.17/examples/hotplugtest.c
libusbx-1.0.17/examples/getopt/
libusbx-1.0.17/examples/getopt/getopt.h
libusbx-1.0.17/examples/getopt/getopt1.c
libusbx-1.0.17/examples/getopt/getopt.c
libusbx-1.0.17/examples/fxload.c
libusbx-1.0.17/configure.ac
libusbx-1.0.17/missing
libusbx-1.0.17/m4/
libusbx-1.0.17/m4/ltoptions.m4
libusbx-1.0.17/m4/ltsugar.m4
libusbx-1.0.17/m4/ltversion.m4
libusbx-1.0.17/m4/libtool.m4
libusbx-1.0.17/m4/lt~obsolete.m4
libusbx-1.0.17/AUTHORS
libusbx-1.0.17/Makefile.in
libusbx-1.0.17/config.h.in
libusbx-1.0.17/NEWS
libusbx-1.0.17/Makefile.am
libusbx-1.0.17/configure
libusbx-1.0.17/TODO
libusbx-1.0.17/INSTALL
libusbx-1.0.17/libusb-1.0.pc.in
libusbx-1.0.17/PORTING
libusbx-1.0.17/config.sub
libusbx-1.0.17/tests/
libusbx-1.0.17/tests/stress.c
libusbx-1.0.17/tests/libusbx_testlib.h
libusbx-1.0.17/tests/Makefile.in
libusbx-1.0.17/tests/testlib.c
libusbx-1.0.17/tests/Makefile.am
libusbx-1.0.17/ltmain.sh
libusbx-1.0.17/msvc/
libusbx-1.0.17/msvc/listdevs_2010.vcxproj.filters
libusbx-1.0.17/msvc/stress_2010.vcxproj.filters
libusbx-1.0.17/msvc/libusb_static.dsp
libusbx-1.0.17/msvc/hotplugtest_2010.vcxproj.filters
libusbx-1.0.17/msvc/libusb_dll_2005.vcproj
libusbx-1.0.17/msvc/xusb_2005.vcproj
libusbx-1.0.17/msvc/getopt_2010.vcxproj
libusbx-1.0.17/msvc/errno.h
libusbx-1.0.17/msvc/config.h
libusbx-1.0.17/msvc/xusb_wince.vcproj
libusbx-1.0.17/msvc/hotplugtest_2010.vcxproj
libusbx-1.0.17/msvc/libusb_dll_wince.vcproj
libusbx-1.0.17/msvc/libusb_dll.dsp
libusbx-1.0.17/msvc/xusb_sources
libusbx-1.0.17/msvc/libusbx_2005.sln
libusbx-1.0.17/msvc/libusb_dll_2010.vcxproj.filters
libusbx-1.0.17/msvc/libusbx_2010.sln
libusbx-1.0.17/msvc/hotplugtest_2012.vcxproj.filters
libusbx-1.0.17/msvc/xusb_2012.vcxproj
libusbx-1.0.17/msvc/libusb_dll_2010.vcxproj
libusbx-1.0.17/msvc/listdevs_wince.vcproj
libusbx-1.0.17/msvc/hotplugtest_sources
libusbx-1.0.17/msvc/inttypes.h
libusbx-1.0.17/msvc/listdevs_2010.vcxproj
libusbx-1.0.17/msvc/getopt_sources
libusbx-1.0.17/msvc/libusb_dll_2012.vcxproj
libusbx-1.0.17/msvc/libusb_dll_2012.vcxproj.filters
libusbx-1.0.17/msvc/xusb_2010.vcxproj
libusbx-1.0.17/msvc/fxload_2010.vcxproj
libusbx-1.0.17/msvc/stress_2012.vcxproj
libusbx-1.0.17/msvc/libusb_static_2012.vcxproj
libusbx-1.0.17/msvc/fxload_sources
libusbx-1.0.17/msvc/libusbx.dsw
libusbx-1.0.17/msvc/fxload_2010.vcxproj.filters
libusbx-1.0.17/msvc/stress_2005.vcproj
libusbx-1.0.17/msvc/listdevs.dsp
libusbx-1.0.17/msvc/ddk_build.cmd
libusbx-1.0.17/msvc/stress_2012.vcxproj.filters
libusbx-1.0.17/msvc/listdevs_sources
libusbx-1.0.17/msvc/libusb_sources
libusbx-1.0.17/msvc/getopt_2005.vcproj
libusbx-1.0.17/msvc/fxload_2012.vcxproj
libusbx-1.0.17/msvc/xusb_2012.vcxproj.filters
libusbx-1.0.17/msvc/libusb_static_2010.vcxproj.filters
libusbx-1.0.17/msvc/xusb_2010.vcxproj.filters
libusbx-1.0.17/msvc/libusb_static_2010.vcxproj
libusbx-1.0.17/msvc/libusbx_2012.sln
libusbx-1.0.17/msvc/libusbx_wince.sln
libusbx-1.0.17/msvc/xusb.dsp
libusbx-1.0.17/msvc/listdevs_2012.vcxproj.filters
libusbx-1.0.17/msvc/hotplugtest_2012.vcxproj
libusbx-1.0.17/msvc/missing.c
libusbx-1.0.17/msvc/getopt_2012.vcxproj
libusbx-1.0.17/msvc/getopt_2012.vcxproj.filters
libusbx-1.0.17/msvc/stdint.h
libusbx-1.0.17/msvc/libusb_static_2012.vcxproj.filters
libusbx-1.0.17/msvc/libusb_static_wince.vcproj
libusbx-1.0.17/msvc/stress_wince.vcproj
libusbx-1.0.17/msvc/listdevs_2012.vcxproj
libusbx-1.0.17/msvc/libusb_static_2005.vcproj
libusbx-1.0.17/msvc/missing.h
libusbx-1.0.17/msvc/fxload_2012.vcxproj.filters
libusbx-1.0.17/msvc/listdevs_2005.vcproj
libusbx-1.0.17/msvc/stress_2010.vcxproj
libusbx-1.0.17/msvc/getopt_2010.vcxproj.filters
libusbx-1.0.17/Xcode/
libusbx-1.0.17/Xcode/libusbx_debug.xcconfig
libusbx-1.0.17/Xcode/config.h
libusbx-1.0.17/Xcode/libusbx_release.xcconfig
libusbx-1.0.17/Xcode/libusbx.xcconfig
libusbx-1.0.17/Xcode/debug.xcconfig
libusbx-1.0.17/Xcode/release.xcconfig
libusbx-1.0.17/Xcode/libusbx.xcodeproj/
libusbx-1.0.17/Xcode/libusbx.xcodeproj/project.pbxproj
libusbx-1.0.17/Xcode/common.xcconfig
libusbx-1.0.17/doc/
libusbx-1.0.17/doc/doxygen.cfg.in
libusbx-1.0.17/doc/Makefile.in
libusbx-1.0.17/doc/Makefile.am
libusbx-1.0.17/compile
libusbx-1.0.17/aclocal.m4
libusbx-1.0.17/README
libusbx-1.0.17/depcomp
libusbx-1.0.17/install-sh
libusbx-1.0.17/config.guess
Compiling and installing libusb 1.0.17
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports nested variables... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... armv6l-unknown-linux-gnueabihf
checking host system type... armv6l-unknown-linux-gnueabihf
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert armv6l-unknown-linux-gnueabihf file names to armv6l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv6l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for windres... no
checking for inline... inline
checking whether gcc and cc understand -c and -o together... yes
checking operating system... Linux
checking for library containing clock_gettime... -lrt
checking libudev.h usability... yes
checking libudev.h presence... yes
checking for libudev.h... yes
checking for udev_new in -ludev... yes
checking poll.h usability... yes
checking poll.h presence... yes
checking for poll.h... yes
checking sys/timerfd.h usability... yes
checking sys/timerfd.h presence... yes
checking for sys/timerfd.h... yes
checking whether TFD_NONBLOCK is declared... yes
checking whether to use timerfd for timing... yes
checking for struct timespec... yes
checking syslog.h usability... yes
checking syslog.h presence... yes
checking for syslog.h... yes
checking for syslog... yes
checking for sigaction... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for gettimeofday... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libusb-1.0.pc
config.status: creating Makefile
config.status: creating libusb/Makefile
config.status: creating examples/Makefile
config.status: creating tests/Makefile
config.status: creating doc/Makefile
config.status: creating doc/doxygen.cfg
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
make all-recursive
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
Making all in libusb
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
CC libusb_1_0_la-core.lo
CC libusb_1_0_la-descriptor.lo
CC libusb_1_0_la-io.lo
CC libusb_1_0_la-strerror.lo
CC libusb_1_0_la-sync.lo
CC libusb_1_0_la-hotplug.lo
CC os/libusb_1_0_la-threads_posix.lo
CC os/libusb_1_0_la-linux_usbfs.lo
CC os/libusb_1_0_la-poll_posix.lo
CC os/libusb_1_0_la-linux_udev.lo
CCLD libusb-1.0.la
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
Making all in doc
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
Making install in libusb
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
/bin/mkdir -p '/usr/local/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libusb-1.0.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libusb-1.0.so.0.1.0 /usr/local/lib/libusb-1.0.so.0.1.0
libtool: install: (cd /usr/local/lib && { ln -s -f libusb-1.0.so.0.1.0 libusb-1.0.so.0 || { rm -f libusb-1.0.so.0 && ln -s libusb-1.0.so.0.1.0 libusb-1.0.so.0; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libusb-1.0.so.0.1.0 libusb-1.0.so || { rm -f libusb-1.0.so && ln -s libusb-1.0.so.0.1.0 libusb-1.0.so; }; })
libtool: install: /usr/bin/install -c .libs/libusb-1.0.lai /usr/local/lib/libusb-1.0.la
libtool: install: /usr/bin/install -c .libs/libusb-1.0.a /usr/local/lib/libusb-1.0.a
libtool: install: chmod 644 /usr/local/lib/libusb-1.0.a
libtool: install: ranlib /usr/local/lib/libusb-1.0.a
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
/bin/mkdir -p '/usr/local/include/libusb-1.0'
/usr/bin/install -c -m 644 libusb.h '/usr/local/include/libusb-1.0'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/libusb'
Making install in doc
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17/doc'
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
make[2]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/usr/local/lib/pkgconfig'
/usr/bin/install -c -m 644 libusb-1.0.pc '/usr/local/lib/pkgconfig'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libusbx-1.0.17'
Downloading libgphoto2 2.5.7
Compiling and installing libgphoto2 2.5.7
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for POSIX sh $() command substitution... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether gcc and cc understand -c and -o together... yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for va_copy() or replacement... va_copy
checking for flex... no
checking for bison... no
checking whether to enable GP2DDB...
checking PKG_CONFIG_PATH... empty
checking for pkg-config... /usr/bin/pkg-config
checking build system type... armv6l-unknown-linux-gnueabihf
checking host system type... armv6l-unknown-linux-gnueabihf
checking how to print strings... printf
checking for a sed that does not truncate output... sed
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert armv6l-unknown-linux-gnueabihf file names to armv6l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv6l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking how to run the C++ preprocessor... g++ -E
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking ltdl.h usability... yes
checking ltdl.h presence... yes
checking for ltdl.h... yes
checking for lt_dlinit in -lltdl... yes
checking that we can compile and link with libltdl... yes
checking for po/Makevars requiring hack... no
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for msgmerge... (cached) /usr/bin/msgmerge
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for asm .symver support... yes
checking for main in -libs... no
checking for jpeg_start_decompress in -ljpeg... no
checking for dynamic library extension... .so
checking pkg-config is at least version 0.9.0... yes
checking for libxml-2.0 to use... autodetect
checking for LIBXML2... no
checking libxml-2.0 config program... xml2-config
checking for xml2-config... no
checking for gdlib to use... autodetect
checking for LIBGD... no
checking gdlib config program... gdlib-config
checking for gdlib-config... no
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/mman.h usability... yes
checking sys/mman.h presence... yes
checking for sys/mman.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for memory.h... (cached) yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking for unistd.h... (cached) yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking langinfo.h usability... yes
checking langinfo.h presence... yes
checking for langinfo.h... yes
checking for inline... inline
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for getopt... yes
checking for getopt_long... yes
checking for mkdir... yes
checking for strdup... yes
checking for strncpy... yes
checking for strcpy... yes
checking for snprintf... yes
checking for sprintf... yes
checking for vsnprintf... yes
checking for gmtime_r... yes
checking for statfs... yes
checking for localtime_r... yes
checking for lstat... yes
checking for inet_aton... yes
checking for rand_r... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for tm_gmtoff in struct tm... yes
checking for sys/mount.h... yes
checking for sys/statfs.h... yes
checking for sys/user.h... yes
checking for sys/vfs.h... yes
checking for struct statfs.f_bfree... yes
checking for struct statfs.f_bavail... yes
checking for struct statfs.f_favail... no
checking for struct statvfs.f_blocks... no
checking for uint8_t in stdint.h... yes
checking whether byte ordering is bigendian... no
checking for le32toh in machine/endian.h... no
checking for ntohl in arpa/inet.h... yes
checking for swap32 in machine/endian.h... no
checking for bswap_32 in byteswap.h... yes
checking where to install camlibs... ${libdir}/libgphoto2/2.5.7
checking which camlibs to compile... all
checking main docdir... ${prefix}/share/doc (FHS style)
checking package docdir... ${prefix}/share/doc/libgphoto2 (default style)
checking for dot... false
checking for doxygen... false
checking whether to create internal code docs... no
checking for html dir... ${prefix}/share/doc/libgphoto2/html (default)
checking for rpmbuild or rpm... using autodetection
checking for rpmbuild... no
checking for rpm... no
checking for rpmbuild or rpm... false (autodetected)
checking for hotplug doc dir... ${prefix}/share/doc/libgphoto2/linux-hotplug (default)
checking for hotplug usermap dir... ${prefix}/share/doc/libgphoto2/linux-hotplug (default)
checking for libexif to use... autodetect
checking for LIBEXIF... yes
checking whether we use a version of libexif with ExifData.ifd[]... yes
checking libexif/exif-data.h usability... yes
checking libexif/exif-data.h presence... yes
checking for libexif/exif-data.h... yes
checking for function exif_data_new in libexif... yes
checking libexif library flags... "-lexif "
checking libexif cpp flags... "-I/usr/include/libexif "
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating README
config.status: creating Makefile
config.status: creating gphoto2-config
config.status: creating camlibs/Makefile
config.status: creating camlibs/canon/doc/Makefile
config.status: creating camlibs/konica/localization/Makefile
config.status: creating libgphoto2/Makefile
config.status: creating libgphoto2.pc
config.status: creating libgphoto2-uninstalled.pc
config.status: creating examples/Makefile
config.status: creating tests/Makefile
config.status: creating tests/ddb/Makefile
config.status: creating tests/ddb/check-ddb.sh
config.status: creating packaging/Makefile
config.status: creating packaging/linux-hotplug/Makefile
config.status: creating packaging/generic/Makefile
config.status: creating packaging/rpm/Makefile
config.status: creating packaging/rpm/package.spec
config.status: creating po/Makefile.in
config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting
config.status: creating doc/Makefile
config.status: creating doc/Doxyfile
config.status: creating doc/Doxyfile-internals
config.status: creating doc/api/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing default-2 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
=== configuring in libgphoto2_port (/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/usr/local' --cache-file=/dev/null --srcdir=.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether gcc and cc understand -c and -o together... yes
checking for ar... ar
checking the archiver (ar) interface... ar
checking build system type... armv6l-unknown-linux-gnueabihf
checking host system type... armv6l-unknown-linux-gnueabihf
checking how to print strings... printf
checking for a sed that does not truncate output... sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert armv6l-unknown-linux-gnueabihf file names to armv6l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv6l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... dlltool
checking how to associate runtime and link libraries... printf %s\n
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking ltdl.h usability... yes
checking ltdl.h presence... yes
checking for ltdl.h... yes
checking for lt_dlinit in -lltdl... yes
checking that we can compile and link with libltdl... yes
checking for POSIX sh $() command substitution... yes
checking for po/Makevars requiring hack... no
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for msgmerge... (cached) /usr/bin/msgmerge
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for gettext... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking for inline... inline
checking for an ANSI C-conforming const... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking stdio.h usability... yes
checking stdio.h presence... yes
checking for stdio.h... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking sgetty.h usability... no
checking sgetty.h presence... no
checking for sgetty.h... no
checking ttold.h usability... no
checking ttold.h presence... no
checking for ttold.h... no
checking ioctl-types.h usability... no
checking ioctl-types.h presence... no
checking for ioctl-types.h... no
checking for fcntl.h... (cached) yes
checking sgtty.h usability... yes
checking sgtty.h presence... yes
checking for sgtty.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking for sys/time.h... (cached) yes
checking termio.h usability... yes
checking termio.h presence... yes
checking for termio.h... yes
checking for unistd.h... (cached) yes
checking endian.h usability... yes
checking endian.h presence... yes
checking for endian.h... yes
checking byteswap.h usability... yes
checking byteswap.h presence... yes
checking for byteswap.h... yes
checking asm/io.h usability... no
checking asm/io.h presence... no
checking for asm/io.h... no
checking mntent.h usability... yes
checking mntent.h presence... yes
checking for mntent.h... yes
checking sys/mntent.h usability... no
checking sys/mntent.h presence... no
checking for sys/mntent.h... no
checking sys/mnttab.h usability... no
checking sys/mnttab.h presence... no
checking for sys/mnttab.h... no
checking scsi/sg.h usability... yes
checking scsi/sg.h presence... yes
checking for scsi/sg.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking sys/file.h usability... yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking for regexec in -lregex... no
checking dns_sd.h usability... no
checking dns_sd.h presence... no
checking for dns_sd.h... no
checking for asm .symver support... yes
checking for mnt_mountp in struct mnttab... no
checking for setmntent... yes
checking for endmntent... yes
checking for strerror... yes
checking for snprintf... yes
checking for vsnprintf... yes
checking for flock... yes
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for va_copy() or replacement... va_copy
checking lockdev.h usability... no
checking lockdev.h presence... no
checking for lockdev.h... no
checking for ttylock.h... no
checking for dev_lock in -llockdev... no
checking for pthread_create in -lpthread... yes
checking PKG_CONFIG_PATH... empty
checking for pkg-config... /usr/bin/pkg-config
checking for dynamic library extension... .so
checking pkg-config is at least version 0.9.0... yes
checking for libusb to use... autodetect
checking for LIBUSB... yes
checking usb.h usability... yes
checking usb.h presence... yes
checking for usb.h... yes
checking for function usb_open in libusb... yes
checking libusb library flags... "-lusb "
checking libusb cpp flags... " "
checking for libusb-1.0 to use... autodetect
checking for LIBUSB1... yes
checking for libusb_strerror in -lusb-1.0... no
checking libusb.h usability... yes
checking libusb.h presence... yes
checking for libusb.h... yes
checking for function libusb_init in libusb-1.0... yes
checking libusb-1.0 library flags... "-L/usr/local/lib -lusb-1.0 "
checking libusb-1.0 cpp flags... "-I/usr/local/include/libusb-1.0 "
checking for re_compile_pattern... yes
checking main docdir... ${prefix}/share/doc (FHS style)
checking package docdir... ${prefix}/share/doc/libgphoto2_port (default style)
checking for html dir... ${prefix}/share/doc/libgphoto2_port/html (default)
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating po/Makefile.in
config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting
config.status: creating libgphoto2_port/Makefile
config.status: creating libgphoto2_port.pc
config.status: creating libgphoto2_port-uninstalled.pc
config.status: creating gphoto2-port-config
config.status: creating test/Makefile
config.status: creating doc/Makefile
config.status: creating m4/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing default-2 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configuration (libgphoto2_port 0.12.0):
Build
Source directory: .
Compiler: gcc
libltdl includes:
libltdl library: -lltdl
Use translations: yes
Serial ports
Serial support: yes
ttylock locking: no
lockdev locking: no
USB ports
libusb: yes
USB ports
libusb-1.0: yes
Documentation
build API docs with gtk-doc: no (not requested)
You may run "make" and "make install" now.
Configuration (libgphoto2 2.5.7):
Build
Source code location: .
GP2DDB support: no (EXPERIMENTAL)
Compiler: gcc
libltdl includes:
libltdl library: -lltdl
Features
Use translations: yes
JPEG mangling support: no
libxml-2.0: no
XML support for Olympus E s..: no
gdlib: no
libGD conversion support: no
Camlibs: all
build API docs with gtk-doc: no (not requested)
libexif: yes
Subprojects: libgphoto2_port
You may run "make" and "make install" now.
Please check whether the configuration I detected matches what you
would like to have. E.g. make sure that USB support is there if you
intend to use USB cameras with libgphoto2 photo camera library.
Please also check that PKG_CONFIG_PATH contains
${libdir}/pkgconfig
before compiling any libgphoto2 frontend.
make all-recursive
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7'
Making all in libgphoto2_port
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
make all-recursive
make[3]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Making all in po
make[4]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/po'
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/po'
Making all in libgphoto2_port
make[4]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-info-list.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-info-list.Tpo -c -o libgphoto2_port_la-gphoto2-port-info-list.lo test -f 'gphoto2-port-info-list.c' || echo './'
gphoto2-port-info-list.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-info-list.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-info-list.Tpo -c gphoto2-port-info-list.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port-info-list.o
mv -f .deps/libgphoto2_port_la-gphoto2-port-info-list.Tpo .deps/libgphoto2_port_la-gphoto2-port-info-list.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-log.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-log.Tpo -c -o libgphoto2_port_la-gphoto2-port-log.lo test -f 'gphoto2-port-log.c' || echo './'
gphoto2-port-log.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-log.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-log.Tpo -c gphoto2-port-log.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port-log.o
mv -f .deps/libgphoto2_port_la-gphoto2-port-log.Tpo .deps/libgphoto2_port_la-gphoto2-port-log.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-version.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-version.Tpo -c -o libgphoto2_port_la-gphoto2-port-version.lo test -f 'gphoto2-port-version.c' || echo './'
gphoto2-port-version.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-version.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-version.Tpo -c gphoto2-port-version.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port-version.o
mv -f .deps/libgphoto2_port_la-gphoto2-port-version.Tpo .deps/libgphoto2_port_la-gphoto2-port-version.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port.Tpo -c -o libgphoto2_port_la-gphoto2-port.lo test -f 'gphoto2-port.c' || echo './'
gphoto2-port.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port.Tpo -c gphoto2-port.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port.o
mv -f .deps/libgphoto2_port_la-gphoto2-port.Tpo .deps/libgphoto2_port_la-gphoto2-port.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-portability.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-portability.Tpo -c -o libgphoto2_port_la-gphoto2-port-portability.lo test -f 'gphoto2-port-portability.c' || echo './'
gphoto2-port-portability.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-portability.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-portability.Tpo -c gphoto2-port-portability.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port-portability.o
mv -f .deps/libgphoto2_port_la-gphoto2-port-portability.Tpo .deps/libgphoto2_port_la-gphoto2-port-portability.Plo
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-result.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-result.Tpo -c -o libgphoto2_port_la-gphoto2-port-result.lo test -f 'gphoto2-port-result.c' || echo './'
gphoto2-port-result.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT libgphoto2_port_la-gphoto2-port-result.lo -MD -MP -MF .deps/libgphoto2_port_la-gphoto2-port-result.Tpo -c gphoto2-port-result.c -fPIC -DPIC -o .libs/libgphoto2_port_la-gphoto2-port-result.o
mv -f .deps/libgphoto2_port_la-gphoto2-port-result.Tpo .deps/libgphoto2_port_la-gphoto2-port-result.Plo
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -no-undefined -Wl,--version-script=./libgphoto2_port.ver -version-info 12:0:0 -o libgphoto2_port.la -rpath /usr/local/lib libgphoto2_port_la-gphoto2-port-info-list.lo libgphoto2_port_la-gphoto2-port-log.lo libgphoto2_port_la-gphoto2-port-version.lo libgphoto2_port_la-gphoto2-port.lo libgphoto2_port_la-gphoto2-port-portability.lo libgphoto2_port_la-gphoto2-port-result.lo -lltdl -lpthread
libtool: link: gcc -shared -fPIC -DPIC .libs/libgphoto2_port_la-gphoto2-port-info-list.o .libs/libgphoto2_port_la-gphoto2-port-log.o .libs/libgphoto2_port_la-gphoto2-port-version.o .libs/libgphoto2_port_la-gphoto2-port.o .libs/libgphoto2_port_la-gphoto2-port-portability.o .libs/libgphoto2_port_la-gphoto2-port-result.o /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread -O2 -Wl,--version-script=./libgphoto2_port.ver -Wl,-soname -Wl,libgphoto2_port.so.12 -o .libs/libgphoto2_port.so.12.0.0
libtool: link: (cd ".libs" && rm -f "libgphoto2_port.so.12" && ln -s "libgphoto2_port.so.12.0.0" "libgphoto2_port.so.12")
libtool: link: (cd ".libs" && rm -f "libgphoto2_port.so" && ln -s "libgphoto2_port.so.12.0.0" "libgphoto2_port.so")
libtool: link: ( cd ".libs" && rm -f "libgphoto2_port.la" && ln -s "../libgphoto2_port.la" "libgphoto2_port.la" )
make[4]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
Making all in test
make[4]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I.. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT test_gp_port-test-gp-port.o -MD -MP -MF .deps/test_gp_port-test-gp-port.Tpo -c -o test_gp_port-test-gp-port.o test -f 'test-gp-port.c' || echo './'
test-gp-port.c
mv -f .deps/test_gp_port-test-gp-port.Tpo .deps/test_gp_port-test-gp-port.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes ../libgphoto2_port/libgphoto2_port.la -lltdl -o test-gp-port test_gp_port-test-gp-port.o -lpthread
libtool: link: gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -o .libs/test-gp-port test_gp_port-test-gp-port.o ../libgphoto2_port/.libs/libgphoto2_port.so /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I.. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT test_port_list-test-port-list.o -MD -MP -MF .deps/test_port_list-test-port-list.Tpo -c -o test_port_list-test-port-list.o test -f 'test-port-list.c' || echo './'
test-port-list.c
mv -f .deps/test_port_list-test-port-list.Tpo .deps/test_port_list-test-port-list.Po
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes ../libgphoto2_port/libgphoto2_port.la -lltdl -o test-port-list test_port_list-test-port-list.o -lpthread
libtool: link: gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -o .libs/test-port-list test_port_list-test-port-list.o ../libgphoto2_port/.libs/libgphoto2_port.so /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread
make[4]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
Making all in .
make[4]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT serial_la-unix.lo -MD -MP -MF .deps/serial_la-unix.Tpo -c -o serial_la-unix.lo test -f 'serial/unix.c' || echo './'
serial/unix.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT serial_la-unix.lo -MD -MP -MF .deps/serial_la-unix.Tpo -c serial/unix.c -fPIC -DPIC -o .libs/serial_la-unix.o
mv -f .deps/serial_la-unix.Tpo .deps/serial_la-unix.Plo
/bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -module -no-undefined -avoid-version -export-dynamic -export-symbols ./iolib.sym -rpath '/usr/local/lib/libgphoto2_port/0.12.0' -o serial.la serial_la-unix.lo ./libgphoto2_port/libgphoto2_port.la -lpthread
libtool: link: echo "{ global:" > .libs/serial.ver
libtool: link: cat ./iolib.sym | sed -e "s/(.)/\1;/" >> .libs/serial.ver
libtool: link: echo "local: *; };" >> .libs/serial.ver
libtool: link: gcc -shared -fPIC -DPIC .libs/serial_la-unix.o -Wl,-rpath -Wl,/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port/.libs ./libgphoto2_port/.libs/libgphoto2_port.so -L/usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread -O2 -Wl,-soname -Wl,serial.so -Wl,-version-script -Wl,.libs/serial.ver -o .libs/serial.so
libtool: link: ( cd ".libs" && rm -f "serial.la" && ln -s "../serial.la" "serial.la" )
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb_la-libusb.lo -MD -MP -MF .deps/usb_la-libusb.Tpo -c -o usb_la-libusb.lo test -f 'usb/libusb.c' || echo './'
usb/libusb.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb_la-libusb.lo -MD -MP -MF .deps/usb_la-libusb.Tpo -c usb/libusb.c -fPIC -DPIC -o .libs/usb_la-libusb.o
mv -f .deps/usb_la-libusb.Tpo .deps/usb_la-libusb.Plo
/bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -module -no-undefined -avoid-version -export-dynamic -export-symbols ./iolib.sym -rpath '/usr/local/lib/libgphoto2_port/0.12.0' -o usb.la usb_la-libusb.lo ./libgphoto2_port/libgphoto2_port.la -lusb -lpthread
libtool: link: echo "{ global:" > .libs/usb.ver
libtool: link: cat ./iolib.sym | sed -e "s/(.)/\1;/" >> .libs/usb.ver
libtool: link: echo "local: ; };" >> .libs/usb.ver
libtool: link: gcc -shared -fPIC -DPIC .libs/usb_la-libusb.o -Wl,-rpath -Wl,/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port/.libs ./libgphoto2_port/.libs/libgphoto2_port.so -L/usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lusb -lpthread -O2 -Wl,-soname -Wl,usb.so -Wl,-version-script -Wl,.libs/usb.ver -o .libs/usb.so
libtool: link: ( cd ".libs" && rm -f "usb.la" && ln -s "../usb.la" "usb.la" )
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usbdiskdirect_la-linux.lo -MD -MP -MF .deps/usbdiskdirect_la-linux.Tpo -c -o usbdiskdirect_la-linux.lo test -f 'usbdiskdirect/linux.c' || echo './'
usbdiskdirect/linux.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usbdiskdirect_la-linux.lo -MD -MP -MF .deps/usbdiskdirect_la-linux.Tpo -c usbdiskdirect/linux.c -fPIC -DPIC -o .libs/usbdiskdirect_la-linux.o
mv -f .deps/usbdiskdirect_la-linux.Tpo .deps/usbdiskdirect_la-linux.Plo
/bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -module -no-undefined -avoid-version -export-dynamic -export-symbols ./iolib.sym -rpath '/usr/local/lib/libgphoto2_port/0.12.0' -o usbdiskdirect.la usbdiskdirect_la-linux.lo ./libgphoto2_port/libgphoto2_port.la -lpthread
libtool: link: echo "{ global:" > .libs/usbdiskdirect.ver
libtool: link: cat ./iolib.sym | sed -e "s/(.)/\1;/" >> .libs/usbdiskdirect.ver
libtool: link: echo "local: ; };" >> .libs/usbdiskdirect.ver
libtool: link: gcc -shared -fPIC -DPIC .libs/usbdiskdirect_la-linux.o -Wl,-rpath -Wl,/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port/.libs ./libgphoto2_port/.libs/libgphoto2_port.so -L/usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread -O2 -Wl,-soname -Wl,usbdiskdirect.so -Wl,-version-script -Wl,.libs/usbdiskdirect.ver -o .libs/usbdiskdirect.so
libtool: link: ( cd ".libs" && rm -f "usbdiskdirect.la" && ln -s "../usbdiskdirect.la" "usbdiskdirect.la" )
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usbscsi_la-linux.lo -MD -MP -MF .deps/usbscsi_la-linux.Tpo -c -o usbscsi_la-linux.lo test -f 'usbscsi/linux.c' || echo './'
usbscsi/linux.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usbscsi_la-linux.lo -MD -MP -MF .deps/usbscsi_la-linux.Tpo -c usbscsi/linux.c -fPIC -DPIC -o .libs/usbscsi_la-linux.o
mv -f .deps/usbscsi_la-linux.Tpo .deps/usbscsi_la-linux.Plo
/bin/bash ./libtool --tag=CC --mode=link gcc -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -module -no-undefined -avoid-version -export-dynamic -export-symbols ./iolib.sym -rpath '/usr/local/lib/libgphoto2_port/0.12.0' -o usbscsi.la usbscsi_la-linux.lo ./libgphoto2_port/libgphoto2_port.la -lpthread
libtool: link: echo "{ global:" > .libs/usbscsi.ver
libtool: link: cat ./iolib.sym | sed -e "s/(.)/\1;/" >> .libs/usbscsi.ver
libtool: link: echo "local: ; };" >> .libs/usbscsi.ver
libtool: link: gcc -shared -fPIC -DPIC .libs/usbscsi_la-linux.o -Wl,-rpath -Wl,/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port/.libs ./libgphoto2_port/.libs/libgphoto2_port.so -L/usr/lib/arm-linux-gnueabihf /usr/lib/arm-linux-gnueabihf/libltdl.so -ldl -lpthread -O2 -Wl,-soname -Wl,usbscsi.so -Wl,-version-script -Wl,.libs/usbscsi.ver -o .libs/usbscsi.so
libtool: link: ( cd ".libs" && rm -f "usbscsi.la" && ln -s "../usbscsi.la" "usbscsi.la" )
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -I/usr/local/include/libusb-1.0 -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb1_la-libusb1.lo -MD -MP -MF .deps/usb1_la-libusb1.Tpo -c -o usb1_la-libusb1.lo test -f 'libusb1/libusb1.c' || echo './'
libusb1/libusb1.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -I/usr/local/include/libusb-1.0 -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb1_la-libusb1.lo -MD -MP -MF .deps/usb1_la-libusb1.Tpo -c libusb1/libusb1.c -fPIC -DPIC -o .libs/usb1_la-libusb1.o
libusb1/libusb1.c:70:20: error: static declaration of 'libusb_strerror' follows non-static declaration
/usr/local/include/libusb-1.0/libusb.h:1307:26: note: previous declaration of 'libusb_strerror' was here
Makefile:902: recipe for target 'usb1_la-libusb1.lo' failed
make[4]: ** [usb1_la-libusb1.lo] Error 1
make[4]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Makefile:1004: recipe for target 'all-recursive' failed
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Makefile:637: recipe for target 'all' failed
make[2]: *** [all] Error 2
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Makefile:677: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7'
Makefile:499: recipe for target 'all' failed
make: *** [all] Error 2
Making install in libgphoto2_port
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Making install in po
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/po'
/bin/sh ../auto-aux/mkinstalldirs /usr/local/share
installing cs.gmo as /usr/local/share/locale/cs/LC_MESSAGES/libgphoto2_port-12.mo
installing da.gmo as /usr/local/share/locale/da/LC_MESSAGES/libgphoto2_port-12.mo
installing de.gmo as /usr/local/share/locale/de/LC_MESSAGES/libgphoto2_port-12.mo
installing es.gmo as /usr/local/share/locale/es/LC_MESSAGES/libgphoto2_port-12.mo
installing eu.gmo as /usr/local/share/locale/eu/LC_MESSAGES/libgphoto2_port-12.mo
installing fi.gmo as /usr/local/share/locale/fi/LC_MESSAGES/libgphoto2_port-12.mo
installing fr.gmo as /usr/local/share/locale/fr/LC_MESSAGES/libgphoto2_port-12.mo
installing it.gmo as /usr/local/share/locale/it/LC_MESSAGES/libgphoto2_port-12.mo
installing ja.gmo as /usr/local/share/locale/ja/LC_MESSAGES/libgphoto2_port-12.mo
installing nl.gmo as /usr/local/share/locale/nl/LC_MESSAGES/libgphoto2_port-12.mo
installing pl.gmo as /usr/local/share/locale/pl/LC_MESSAGES/libgphoto2_port-12.mo
installing pt_BR.gmo as /usr/local/share/locale/pt_BR/LC_MESSAGES/libgphoto2_port-12.mo
installing ru.gmo as /usr/local/share/locale/ru/LC_MESSAGES/libgphoto2_port-12.mo
installing sk.gmo as /usr/local/share/locale/sk/LC_MESSAGES/libgphoto2_port-12.mo
installing sr.gmo as /usr/local/share/locale/sr/LC_MESSAGES/libgphoto2_port-12.mo
installing sv.gmo as /usr/local/share/locale/sv/LC_MESSAGES/libgphoto2_port-12.mo
installing uk.gmo as /usr/local/share/locale/uk/LC_MESSAGES/libgphoto2_port-12.mo
installing vi.gmo as /usr/local/share/locale/vi/LC_MESSAGES/libgphoto2_port-12.mo
installing zh_CN.gmo as /usr/local/share/locale/zh_CN/LC_MESSAGES/libgphoto2_port-12.mo
installing zh_TW.gmo as /usr/local/share/locale/zh_TW/LC_MESSAGES/libgphoto2_port-12.mo
if test "libgphoto2_port" = "gettext-tools"; then
/bin/sh ../auto-aux/mkinstalldirs /usr/local/share/gettext/po;
for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed [email protected] [email protected] insert-header.sin Rules-quot Makevars.template; do
/usr/bin/install -c -m 644 ./$file
/usr/local/share/gettext/po/$file;
done;
for file in Makevars; do
rm -f /usr/local/share/gettext/po/$file;
done;
else
: ;
fi
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/po'
Making install in libgphoto2_port
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
make[3]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
/bin/mkdir -p '/usr/local/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c libgphoto2_port.la '/usr/local/lib'
libtool: install: /usr/bin/install -c .libs/libgphoto2_port.so.12.0.0 /usr/local/lib/libgphoto2_port.so.12.0.0
libtool: install: (cd /usr/local/lib && { ln -s -f libgphoto2_port.so.12.0.0 libgphoto2_port.so.12 || { rm -f libgphoto2_port.so.12 && ln -s libgphoto2_port.so.12.0.0 libgphoto2_port.so.12; }; })
libtool: install: (cd /usr/local/lib && { ln -s -f libgphoto2_port.so.12.0.0 libgphoto2_port.so || { rm -f libgphoto2_port.so && ln -s libgphoto2_port.so.12.0.0 libgphoto2_port.so; }; })
libtool: install: /usr/bin/install -c .libs/libgphoto2_port.lai /usr/local/lib/libgphoto2_port.la
libtool: finish: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/sbin" ldconfig -n /usr/local/lib
Libraries have been installed in:
/usr/local/lib
If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
- add LIBDIR to the `LD_LIBRARY_PATH' environment variable
during execution
- add LIBDIR to the `LD_RUN_PATH' environment variable
during linking
- use the `-Wl,-rpath -Wl,LIBDIR' linker flag
- have your system administrator add LIBDIR to `/etc/ld.so.conf'
See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/libgphoto2_port'
Making install in test
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
make[3]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
make[3]: Nothing to be done for 'install-exec-am'.
make[3]: Nothing to be done for 'install-data-am'.
make[3]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port/test'
Making install in .
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
/bin/bash ./libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -I/usr/local/include/libusb-1.0 -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb1_la-libusb1.lo -MD -MP -MF .deps/usb1_la-libusb1.Tpo -c -o usb1_la-libusb1.lo test -f 'libusb1/libusb1.c' || echo './'
libusb1/libusb1.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -DLOCALEDIR="/usr/local/share/locale" -DIOLIBS="/usr/local/lib/libgphoto2_port/0.12.0" -D_GPHOTO2_INTERNAL_CODE -I. -I/usr/local/include/libusb-1.0 -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -MT usb1_la-libusb1.lo -MD -MP -MF .deps/usb1_la-libusb1.Tpo -c libusb1/libusb1.c -fPIC -DPIC -o .libs/usb1_la-libusb1.o
libusb1/libusb1.c:70:20: error: static declaration of 'libusb_strerror' follows non-static declaration
/usr/local/include/libusb-1.0/libusb.h:1307:26: note: previous declaration of 'libusb_strerror' was here
Makefile:902: recipe for target 'usb1_la-libusb1.lo' failed
make[2]: *** [usb1_la-libusb1.lo] Error 1
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Makefile:1004: recipe for target 'install-recursive' failed
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/libgphoto2-2.5.7/libgphoto2_port'
Makefile:677: recipe for target 'install-recursive' failed
make: *** [install-recursive] Error 1
Downloading gphoto2 2.5.6
gphoto2-2.5.6/
gphoto2-2.5.6/configure
gphoto2-2.5.6/tests/
gphoto2-2.5.6/tests/Makefile.in
gphoto2-2.5.6/tests/Makefile.am
gphoto2-2.5.6/tests/data/
gphoto2-2.5.6/tests/data/test018.param
gphoto2-2.5.6/tests/data/test032.param
gphoto2-2.5.6/tests/data/test001.param
gphoto2-2.5.6/tests/data/test033.result
gphoto2-2.5.6/tests/data/test034.result
gphoto2-2.5.6/tests/data/test017.param
gphoto2-2.5.6/tests/data/test013.result
gphoto2-2.5.6/tests/data/Makefile.in
gphoto2-2.5.6/tests/data/test037.param
gphoto2-2.5.6/tests/data/Makefile.am
gphoto2-2.5.6/tests/data/test010.param
gphoto2-2.5.6/tests/data/test012.param
gphoto2-2.5.6/tests/data/test029.param
gphoto2-2.5.6/tests/data/test015.param
gphoto2-2.5.6/tests/data/test038.param
gphoto2-2.5.6/tests/data/test028.result
gphoto2-2.5.6/tests/data/test027.result
gphoto2-2.5.6/tests/data/test014.param
gphoto2-2.5.6/tests/data/test005.param
gphoto2-2.5.6/tests/data/test014.result
gphoto2-2.5.6/tests/data/test030.result
gphoto2-2.5.6/tests/data/test009.param
gphoto2-2.5.6/tests/data/test008.param
gphoto2-2.5.6/tests/data/test029.result
gphoto2-2.5.6/tests/data/test036.param
gphoto2-2.5.6/tests/data/test013.param
gphoto2-2.5.6/tests/data/test020.param
gphoto2-2.5.6/tests/data/test016.result
gphoto2-2.5.6/tests/data/test003.param
gphoto2-2.5.6/tests/data/test015.result
gphoto2-2.5.6/tests/data/test039.param
gphoto2-2.5.6/tests/data/test006.param
gphoto2-2.5.6/tests/data/test040.param
gphoto2-2.5.6/tests/data/test034.param
gphoto2-2.5.6/tests/data/test028.param
gphoto2-2.5.6/tests/data/test023.param
gphoto2-2.5.6/tests/data/test019.param
gphoto2-2.5.6/tests/data/test021.param
gphoto2-2.5.6/tests/data/test023.result
gphoto2-2.5.6/tests/data/test002.result
gphoto2-2.5.6/tests/data/test012.result
gphoto2-2.5.6/tests/data/test031.param
gphoto2-2.5.6/tests/data/test004.result
gphoto2-2.5.6/tests/data/test022.param
gphoto2-2.5.6/tests/data/test035.param
gphoto2-2.5.6/tests/data/test004.param
gphoto2-2.5.6/tests/data/test024.param
gphoto2-2.5.6/tests/data/test022.result
gphoto2-2.5.6/tests/data/test032.result
gphoto2-2.5.6/tests/data/test010.result
gphoto2-2.5.6/tests/data/test016.param
gphoto2-2.5.6/tests/data/test002.param
gphoto2-2.5.6/tests/data/test009.result
gphoto2-2.5.6/tests/data/test001.result
gphoto2-2.5.6/tests/data/test037.result
gphoto2-2.5.6/tests/data/test027.param
gphoto2-2.5.6/tests/data/test033.param
gphoto2-2.5.6/tests/data/test017.result
gphoto2-2.5.6/tests/data/test035.result
gphoto2-2.5.6/tests/data/test011.result
gphoto2-2.5.6/tests/data/test018.result
gphoto2-2.5.6/tests/data/test011.param
gphoto2-2.5.6/tests/data/test026.param
gphoto2-2.5.6/tests/data/test030.param
gphoto2-2.5.6/tests/data/test025.param
gphoto2-2.5.6/tests/data/test031.result
gphoto2-2.5.6/tests/data/test005.result
gphoto2-2.5.6/tests/data/test007.param
gphoto2-2.5.6/tests/testsuite
gphoto2-2.5.6/tests/TESTING
gphoto2-2.5.6/tests/staging/
gphoto2-2.5.6/tests/staging/gphotobutton.jpg
gphoto2-2.5.6/tests/staging/Makefile.in
gphoto2-2.5.6/tests/staging/Makefile.am
gphoto2-2.5.6/tests/staging/subdir1/
gphoto2-2.5.6/tests/staging/subdir1/Makefile.in
gphoto2-2.5.6/tests/staging/subdir1/Makefile.am
gphoto2-2.5.6/tests/staging/subdir1/architecture.png
gphoto2-2.5.6/tests/staging/xexif.jpg
gphoto2-2.5.6/tests/staging/subdir2/
gphoto2-2.5.6/tests/staging/subdir2/Makefile.in
gphoto2-2.5.6/tests/staging/subdir2/Makefile.am
gphoto2-2.5.6/tests/staging/smalllogo.png
gphoto2-2.5.6/tests/staging/pop.wav
gphoto2-2.5.6/contrib/
gphoto2-2.5.6/contrib/README
gphoto2-2.5.6/contrib/Makefile.in
gphoto2-2.5.6/contrib/Makefile.am
gphoto2-2.5.6/contrib/simple-mtpupload/
gphoto2-2.5.6/contrib/simple-mtpupload/Makefile-files
gphoto2-2.5.6/contrib/simple-mtpupload/uploadmp3s.pl
gphoto2-2.5.6/contrib/multi-capture/
gphoto2-2.5.6/contrib/multi-capture/Makefile-files
gphoto2-2.5.6/README
gphoto2-2.5.6/Makefile.in
gphoto2-2.5.6/config.h.in
gphoto2-2.5.6/Makefile.am
gphoto2-2.5.6/NEWS
gphoto2-2.5.6/aclocal.m4
gphoto2-2.5.6/m4m/
gphoto2-2.5.6/m4m/gp-packaging.m4
gphoto2-2.5.6/m4m/gp-dynamic-libraries.m4
gphoto2-2.5.6/m4m/gp-libltdl.m4
gphoto2-2.5.6/m4m/gp-va-copy.m4
gphoto2-2.5.6/m4m/gp-manual-pstoimg.m4
gphoto2-2.5.6/m4m/README.m4
gphoto2-2.5.6/m4m/Makefile.in
gphoto2-2.5.6/m4m/gp-stdint.m4
gphoto2-2.5.6/m4m/gp-manual-w3m.m4
gphoto2-2.5.6/m4m/Makefile.am
gphoto2-2.5.6/m4m/gp-references.m4
gphoto2-2.5.6/m4m/gp-manual-graphviz.m4
gphoto2-2.5.6/m4m/gp-pkg-config.m4
gphoto2-2.5.6/m4m/gp-udev.m4
gphoto2-2.5.6/m4m/gp-camlibs.m4
gphoto2-2.5.6/m4m/gp-manual-docbook-xml.m4
gphoto2-2.5.6/m4m/gp-internal-docs.m4
gphoto2-2.5.6/m4m/gp-check-shell-environment.m4
gphoto2-2.5.6/m4m/gp-manual-gtk-doc.m4
gphoto2-2.5.6/m4m/gp-manual-documentation.m4
gphoto2-2.5.6/m4m/gp-manual-fig2dev.m4
gphoto2-2.5.6/m4m/gp-check-doxygen.m4
gphoto2-2.5.6/m4m/gp-documentation.m4
gphoto2-2.5.6/m4m/gp-byteorder.m4
gphoto2-2.5.6/m4m/gp-config-msg.m4
gphoto2-2.5.6/m4m/gp-gettext-hack.m4
gphoto2-2.5.6/m4m/gp-check-library.m4
gphoto2-2.5.6/m4m/gp-check-popt.m4
gphoto2-2.5.6/doc/
gphoto2-2.5.6/doc/Makefile.in
gphoto2-2.5.6/doc/Makefile.am
gphoto2-2.5.6/doc/gphoto2.1
gphoto2-2.5.6/TODO
gphoto2-2.5.6/auto-aux/
gphoto2-2.5.6/auto-aux/compile
gphoto2-2.5.6/auto-aux/depcomp
gphoto2-2.5.6/auto-aux/config.sub
gphoto2-2.5.6/auto-aux/test-driver
gphoto2-2.5.6/auto-aux/install-sh
gphoto2-2.5.6/auto-aux/ltmain.sh
gphoto2-2.5.6/auto-aux/config.rpath
gphoto2-2.5.6/auto-aux/mkinstalldirs
gphoto2-2.5.6/auto-aux/config.guess
gphoto2-2.5.6/auto-aux/missing
gphoto2-2.5.6/COPYING
gphoto2-2.5.6/AUTHORS
gphoto2-2.5.6/ABOUT-NLS
gphoto2-2.5.6/ChangeLog
gphoto2-2.5.6/configure.ac
gphoto2-2.5.6/auto-m4/
gphoto2-2.5.6/auto-m4/ltoptions.m4
gphoto2-2.5.6/auto-m4/ltversion.m4
gphoto2-2.5.6/auto-m4/po.m4
gphoto2-2.5.6/auto-m4/lt~obsolete.m4
gphoto2-2.5.6/auto-m4/iconv.m4
gphoto2-2.5.6/auto-m4/libtool.m4
gphoto2-2.5.6/auto-m4/progtest.m4
gphoto2-2.5.6/auto-m4/lib-link.m4
gphoto2-2.5.6/auto-m4/gettext.m4
gphoto2-2.5.6/auto-m4/lib-ld.m4
gphoto2-2.5.6/auto-m4/nls.m4
gphoto2-2.5.6/auto-m4/lib-prefix.m4
gphoto2-2.5.6/auto-m4/ltsugar.m4
gphoto2-2.5.6/INSTALL
gphoto2-2.5.6/po/
gphoto2-2.5.6/po/insert-header.sin
gphoto2-2.5.6/po/ja.gmo
gphoto2-2.5.6/po/is.po
gphoto2-2.5.6/po/Rules-quot
gphoto2-2.5.6/po/zh_CN.gmo
gphoto2-2.5.6/po/zh_TW.po
gphoto2-2.5.6/po/az.gmo
gphoto2-2.5.6/po/fr.gmo
gphoto2-2.5.6/po/de.po
gphoto2-2.5.6/po/ja.po
gphoto2-2.5.6/po/ru.gmo
gphoto2-2.5.6/po/sv.po
gphoto2-2.5.6/po/POTFILES.in
gphoto2-2.5.6/po/rw.gmo
gphoto2-2.5.6/po/sr.gmo
gphoto2-2.5.6/po/es.po
gphoto2-2.5.6/po/stamp-po
gphoto2-2.5.6/po/pa.gmo
gphoto2-2.5.6/po/en_GB.po
gphoto2-2.5.6/po/eu.gmo
gphoto2-2.5.6/po/Makefile.in.in
gphoto2-2.5.6/po/id.po
gphoto2-2.5.6/po/sr.po
gphoto2-2.5.6/po/es.gmo
gphoto2-2.5.6/po/gphoto2.pot
gphoto2-2.5.6/po/nl.po
gphoto2-2.5.6/po/sk.po
gphoto2-2.5.6/po/ro.gmo
gphoto2-2.5.6/po/quot.sed
gphoto2-2.5.6/po/eu.po
gphoto2-2.5.6/po/pa.po
gphoto2-2.5.6/po/it.gmo
gphoto2-2.5.6/po/fi.po
gphoto2-2.5.6/po/pl.po
gphoto2-2.5.6/po/zh_CN.po
gphoto2-2.5.6/po/rw.po
gphoto2-2.5.6/po/de.gmo
gphoto2-2.5.6/po/cs.gmo
gphoto2-2.5.6/po/id.gmo
gphoto2-2.5.6/po/vi.gmo
gphoto2-2.5.6/po/sv.gmo
gphoto2-2.5.6/po/en_GB.gmo
gphoto2-2.5.6/po/Makevars
gphoto2-2.5.6/po/pl.gmo
gphoto2-2.5.6/po/da.gmo
gphoto2-2.5.6/po/pt_BR.gmo
gphoto2-2.5.6/po/[email protected]
gphoto2-2.5.6/po/uk.po
gphoto2-2.5.6/po/[email protected]
gphoto2-2.5.6/po/vi.po
gphoto2-2.5.6/po/uk.gmo
gphoto2-2.5.6/po/boldquot.sed
gphoto2-2.5.6/po/nl.gmo
gphoto2-2.5.6/po/ro.po
gphoto2-2.5.6/po/fi.gmo
gphoto2-2.5.6/po/hu.po
gphoto2-2.5.6/po/da.po
gphoto2-2.5.6/po/it.po
gphoto2-2.5.6/po/ru.po
gphoto2-2.5.6/po/fr.po
gphoto2-2.5.6/po/remove-potcdate.sin
gphoto2-2.5.6/po/pt_BR.po
gphoto2-2.5.6/po/sk.gmo
gphoto2-2.5.6/po/hu.gmo
gphoto2-2.5.6/po/cs.po
gphoto2-2.5.6/po/az.po
gphoto2-2.5.6/po/is.gmo
gphoto2-2.5.6/po/zh_TW.gmo
gphoto2-2.5.6/gphoto2/
gphoto2-2.5.6/gphoto2/gphoto2-cmd-config.h
gphoto2-2.5.6/gphoto2/gphoto2-cmd-capture.h
gphoto2-2.5.6/gphoto2/Makefile.in
gphoto2-2.5.6/gphoto2/Makefile.am
gphoto2-2.5.6/gphoto2/i18n.h
gphoto2-2.5.6/gphoto2/actions.c
gphoto2-2.5.6/gphoto2/gphoto2-cmd-capture.c
gphoto2-2.5.6/gphoto2/shell.h
gphoto2-2.5.6/gphoto2/shell.c
gphoto2-2.5.6/gphoto2/globals.h
gphoto2-2.5.6/gphoto2/spawnve.h
gphoto2-2.5.6/gphoto2/gphoto2-cmd-config.c
gphoto2-2.5.6/gphoto2/gp-params.c
gphoto2-2.5.6/gphoto2/gp-params.h
gphoto2-2.5.6/gphoto2/main.c
gphoto2-2.5.6/gphoto2/test-hook.sh
gphoto2-2.5.6/gphoto2/spawntest.c
gphoto2-2.5.6/gphoto2/range.c
gphoto2-2.5.6/gphoto2/version.c
gphoto2-2.5.6/gphoto2/range.h
gphoto2-2.5.6/gphoto2/main.h
gphoto2-2.5.6/gphoto2/foreach.h
gphoto2-2.5.6/gphoto2/spawnve.c
gphoto2-2.5.6/gphoto2/foreach.c
gphoto2-2.5.6/gphoto2/version.h
gphoto2-2.5.6/gphoto2/actions.h
gphoto2-2.5.6/packaging/
gphoto2-2.5.6/packaging/Makefile.in
gphoto2-2.5.6/packaging/Makefile.am
gphoto2-2.5.6/packaging/rpm/
gphoto2-2.5.6/packaging/rpm/Makefile.in
gphoto2-2.5.6/packaging/rpm/Makefile.am
gphoto2-2.5.6/packaging/rpm/package.spec.in
gphoto2-2.5.6/packaging/rpm/gphoto2.spec
Compiling and installing gphoto2
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for POSIX sh $() command substitution... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking whether gcc and cc understand -c and -o together... yes
checking build system type... armv6l-unknown-linux-gnueabihf
checking host system type... armv6l-unknown-linux-gnueabihf
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking how to convert armv6l-unknown-linux-gnueabihf file names to armv6l-unknown-linux-gnueabihf format... func_convert_file_noop
checking how to convert armv6l-unknown-linux-gnueabihf file names to toolchain format... func_convert_file_noop
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for ar... ar
checking for archiver @file support... @
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for sysroot... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking PKG_CONFIG_PATH... empty
checking for pkg-config... /usr/bin/pkg-config
checking for po/Makevars requiring hack... no
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for shared library run path origin... done
checking whether NLS is requested... yes
checking for GNU gettext in libc... yes
checking whether to use NLS... yes
checking where the gettext function comes from... libc
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for msgmerge... (cached) /usr/bin/msgmerge
checking for iconv... yes
checking for iconv declaration...
extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for dynamic library extension... .so
checking pkg-config is at least version 0.9.0... yes
checking for libgphoto2 to use... autodetect
checking for LIBGPHOTO2... yes
checking libgphoto2 library flags... "-L/usr/local/lib -lgphoto2 -lgphoto2_port -lm -lexif "
checking libgphoto2 cpp flags... "-I/usr/local/include/gphoto2 -I/usr/include/libexif "
checking for strptime... yes
checking for signal... yes
checking for pause... yes
checking for sleep... yes
checking for ANSI C header files... (cached) yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for floor in -lm... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking for pthread_exit in -lpthread... yes
checking cdk/cdk.h usability... no
checking cdk/cdk.h presence... no
checking for cdk/cdk.h... no
checking jpeglib.h usability... no
checking jpeglib.h presence... no
checking for jpeglib.h... no
checking for libexif to use... autodetect
checking for LIBEXIF... yes
checking libexif/exif-log.h usability... yes
checking libexif/exif-log.h presence... yes
checking for libexif/exif-log.h... yes
checking libexif/exif-ifd.h usability... yes
checking libexif/exif-ifd.h presence... yes
checking for libexif/exif-ifd.h... yes
checking libexif/exif-data.h usability... yes
checking libexif/exif-data.h presence... yes
checking for libexif/exif-data.h... yes
checking for function exif_data_new in libexif... yes
checking libexif library flags... "-lexif "
checking libexif cpp flags... "-I/usr/include/libexif "
checking whether popt is required... yes
checking popt.h usability... yes
checking popt.h presence... yes
checking for popt.h... yes
checking for poptStuffArgs in -lpopt... yes
checking if popt is functional... yes
checking readline/readline.h usability... no
checking readline/readline.h presence... no
checking for readline/readline.h... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating po/Makefile.in
config.status: WARNING: 'po/Makefile.in.in' seems to ignore the --datarootdir setting
config.status: creating Makefile
config.status: creating gphoto2/Makefile
config.status: creating m4m/Makefile
config.status: creating doc/Makefile
config.status: creating contrib/Makefile
config.status: creating packaging/Makefile
config.status: creating packaging/rpm/Makefile
config.status: creating packaging/rpm/package.spec
config.status: creating tests/data/Makefile
config.status: creating tests/staging/subdir1/Makefile
config.status: creating tests/staging/subdir2/Makefile
config.status: creating tests/staging/Makefile
config.status: creating tests/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
config.status: executing default-2 commands
config.status: creating po/POTFILES
config.status: creating po/Makefile
Configuration (gphoto2 2.5.6):
Build
Source code location: .
Compiler: gcc
Features
Use translations: yes
libgphoto2: yes
pthread support: yes (-lpthread)
Interactive config support: no (http://dickey.his.com/cdk/cdk.html)
JPEG support: no
libexif: yes
Text preview support: no (not requested)
use popt library: yes
popt libs: -L/usr/ -lpopt
popt cppflags: -I/usr/include
Readline support: no (http://cnswww.cns.cwru.edu/~chet/readline/rltop.html)
You may run "make" and "make install" now.
make all-recursive
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6'
Making all in m4m
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
Making all in contrib
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
Making all in doc
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
Making all in gphoto2
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/local/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR="/usr/local/share/locale" -D_GPHOTO2_INTERNAL_CODE -I/usr/include/libexif -I/usr/include -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -g -MT gphoto2-actions.o -MD -MP -MF .deps/gphoto2-actions.Tpo -c -o gphoto2-actions.o test -f 'actions.c' || echo './'
actions.c
In file included from actions.c:39:0:
actions.h:24:36: fatal error: gphoto2/gphoto2-camera.h: No such file or directory
compilation terminated.
Makefile:784: recipe for target 'gphoto2-actions.o' failed
make[2]: *** [gphoto2-actions.o] Error 1
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/gphoto2'
Makefile:453: recipe for target 'all-recursive' failed
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6'
Makefile:384: recipe for target 'all' failed
make: *** [all] Error 2
Making install in m4m
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/m4m'
Making install in contrib
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
make[2]: Nothing to be done for 'install-exec-am'.
make[2]: Nothing to be done for 'install-data-am'.
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/contrib'
Making install in doc
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
make[2]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
make[2]: Nothing to be done for 'install-exec-am'.
/bin/mkdir -p '/usr/local/share/man/man1'
/usr/bin/install -c -m 644 gphoto2.1 '/usr/local/share/man/man1'
make[2]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/doc'
Making install in gphoto2
make[1]: Entering directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/gphoto2'
gcc -DHAVE_CONFIG_H -I. -I.. -DLOCALEDIR="/usr/local/share/locale" -D_GPHOTO2_INTERNAL_CODE -I.. -I../gphoto2 -I/usr/local/include/gphoto2 -I/usr/include/libexif -DLOCALEDIR="/usr/local/share/locale" -D_GPHOTO2_INTERNAL_CODE -I/usr/include/libexif -I/usr/include -g -O2 -Wall -Wmissing-declarations -Wmissing-prototypes -g -MT gphoto2-actions.o -MD -MP -MF .deps/gphoto2-actions.Tpo -c -o gphoto2-actions.o test -f 'actions.c' || echo './'
actions.c
In file included from actions.c:39:0:
actions.h:24:36: fatal error: gphoto2/gphoto2-camera.h: No such file or directory
compilation terminated.
Makefile:784: recipe for target 'gphoto2-actions.o' failed
make[1]: *** [gphoto2-actions.o] Error 1
make[1]: Leaving directory '/home/pi/gphoto2-temp-folder/gphoto2-2.5.6/gphoto2'
Makefile:453: recipe for target 'install-recursive' failed
make: *** [install-recursive] Error 1
Linking libraries
./gphoto2-updater.sh: 184: ./gphoto2-updater.sh: /usr/local/lib/libgphoto2/print-camera-list: not found
Removing temp files
Finished!! Enjoy it!
./gphoto2-updater.sh: 214: ./gphoto2-updater.sh: gphoto2: not found