Ambient light that resembles a flickering Estus Flask sitting on a stone base, with multiple modes of operation, namely regular Estus Flask and Ashen Estus Flask.
git clone --recursive https://github.com/GrimKriegor/EstusFlask.git
cd EstusFlask/
models/flask.blend
Material | Clear PLA
Layer height | 0.1 mm
Wall thickness | 0.8 mm
Temperature | 195° C
Infill | Concentric 5%
Supports | None
Base adhesion | Brim 8 mm
models/base.fcstd
Material | Gray PLA
Layer height | 0.2 mm
Wall thickness | 1.2 mm
Temperature | 200° C
Infill | Grid 15%
Supports | Touching buildplate
Base adhesion | Skirt
RGB LED connected to pins 9, 10 and 11 an USB powered AVR ATMega328p board through three 220 ohm resistors.
cd src/
make upload
models/flask.blend
is a fork of Estus Flask by 3D2N licensed under the Creative Commons - Attribution license.