gtips / reviung Goto Github PK

View Code? Open in Web Editor NEW

435.0 9.0 68.0 133.77 MB

License: MIT License

reviung's Introduction

REVIUNG

REVIUNG41

The REVIUNG41 is 41-key column staggered keyboard.

Firmware
Build guide

REVIUNG39 Mk-II, REVIUNG39 and REVIUNG39S

The REVIUNG39 is 39-key column staggered keyboard.

Soldering is divided into through-hole mounting version and surface mounting (SMD) version so that the soldering difficulty can be selected.

EVIUNG39 Mk-II and REVIUNG39 is regular version (SMD)
REVIUNG39S is simple version (through-hole)

REVIUNG39 Mk-II

REVIUNG39

REVIUNG39 Build guide
Firmware

REVIUNG34

The REVIUNG34 is 34-key (or33-key) column staggered keyboard.

REVIUNG34

REVIUNG34 Build guide
Firmware

REVIUNG5

The REVIUNG5 is 5-key (or 4-key + Rotary Encoder) macropad.

REVIUNG5

REVIUNG5 Build guide
Firmware

REVIUNG34 SPLIT Mk-II and REVIUNG34 SPLIT

The REVIUNG34 is 34-key split ortholinear keyboard.
(REVIUNG34 SPLIT Mk-II is 34-key or 33-key)
Use a LAN cable to connect the left and right keyboards.

REVIUNG34 Mk-II

REVIUNG34 SPLIT

Firmware
REVIUNG34 SPLIT Build guide

REVIUNG33

The REVIUNG33 is 33-key ortholinear keyboard.

Firmware

REVIUNG53

The REVIUNG53 is 53-key keyboard.

Firmware

REVIUNG61

Standard ANSI 60% keyboard. And compatible with MX and ALPS.

Firmware

reviung's People

Contributors

Stargazers

Watchers

reviung's Issues

Revivung 53 - Can't load VIA

Hi !

i try upload Json VIA but can't load https://i.imgur.com/OOCRgjR.png. I download and compile in https://config.qmk.fm/#/reviung/reviung53/LAYOUT_reviung53. How i can fix it ?

and build qmk : "reviung/reviung53: Layout "LAYOUT_reviung53" should not contain name of keyboard."
Thank you !

Why are non 'reviung layout' boards in the reviung repo?

Most would consider a reviung to have the signature rev39/41 stagger, key positions, etc. Yet, you have boards in this repo that do not fit the 'reviung layout'. I propose moving the outliers to a new repo under your account, or just renamed in this repo.

Love your boards btw, it just gets confusing

Acrylic Upper Mid Plate Is Missing Space For Switch Teeth

The sandwiched upper mid acrylic plate contains no space in the 14x14mm switch holes for the switch panel mount teeth to grip onto the FR4 top plate. So the switches may fall out, especially when removing keycaps.

I've hacked together an STL with some cutouts (shown below) which has enabled me to print my own upper mid plate, but sadly I don't have Illustrator, so can't submit a PR to correct the issue at source.

I'd like to suggest that something like the cutouts shown below is applied to the Reviung upper mid plate, so that the switches can grip the FR4 correctly.

Link to the keyboard footprints

Hello,

I was not able to find the library that you are using for your footprints and symbols. I think it is similar to https://github.com/foostan/kbd

Are you able to post a kicad library with the footprints and symbols that you are using?
Either as a repository, a directory here, or a submodule to another git repository?

Thank you again for the wonderful references.

OLED

Any chance of getting a version of the pcb that adds an oled to the Reviung41 ala the Corne? The schematic looks like it has the right pins free on the MCU .. but my non-existent KiCAD skills are not up to the task of adding the header and re-routing the board ...

Reviung 53 - stacked acrylic case

Hi, I would like to print my self the acrylic plate, but after checking the reviung53_2mm_450x300_ver1.1.svg file, I have a question about whether it is already in the correct size width, and height? and I still need to print the top plate and the bottom plate but can't figure out which size should I follow for printing the acrylic, I realize the bottom plate have these notes on the pdf W:262.05mm H:114.413mm and the top plate from Gerber file have a different trailing number tho but basically the same 262x114