This repository contains Dockerfiles for use with Docker and Compose to deploy Project Clearwater.
There are two options for installing Docker:
- using Docker Compose, which sets up appropriate connections between Docker containers. This is the recommended approach.
- manually, if Docker Compose isn't available. In this case you need to use some Docker options to set up the networking config that Compose would set up automatically.
You should follow the "Common Preparation" section, then either the "Using Compose" or the "Manual Turn-Up" section.
When using the 3.13.0-74-generic kernel, we've seen an issue which causes Clearwater not to start properly. If you are using this kernel (uname -r will tell you), you should install a newer kernel (e.g. with sudo apt-get install linux-image-3.13.0-87-generic) and reboot.
To prepare your system to deploy Clearwater on Docker, run:
# Install Docker (on Ubuntu).
wget -qO- https://get.docker.com/ | sh
# Checkout clearwater-docker.
git clone --recursive [email protected]:Metaswitch/clearwater-docker.git
Edit clearwater-docker/.env so that PUBLIC_IP is set to an IP address that can be used by SIP clients to access the docker host. E.g. if you are running in AWS, this wants to be the public IP of your AWS VM.
If you want to be able to monitor your Docker deployment via a web UI then you might like to install and run Weave Scope. This only takes a minute to install and provides real time visualizations showing all of your containers, their resource usage and the connectivity between them.
There is a Compose file to instantiate a minimal (non-fault-tolerant) distributed Clearwater deployment under Docker.
To prepare your system to deploy Clearwater using Compose, after running the common preparation steps above, run:
# Install Docker Compose (on Ubuntu).
sudo apt-get install python-pip -y
sudo pip install -U docker-compose
# Build the base Clearwater docker image.
cd clearwater-docker
sudo docker build -t clearwater/base base
To start the Clearwater services, run:
# Build all the other Clearwater Docker images and start a deployment.
sudo docker-compose -f minimal-distributed.yaml up -d
Having started up a deployment, it is then possible to scale it by adding more Sprout, Memcached, Chronos or Cassandra nodes. E.g. to spin up an additional node of each of these types, run:
sudo docker-compose -f minimal-distributed.yaml scale sprout=2 memcached=2 chronos=2 cassandra=2
Note that scaling of Docker deployments is a work in progress and there are currently a number of known issues...
-
Bono doesn’t automatically start using new Sprout nodes unless the Bono process is restarted, e.g.
sudo docker exec clearwaterdocker_bono_1 sudo service bono restart -
Homestead-prov and Ellis don’t load balance across multiple Cassandra nodes.
-
There is no tested or documented process for scaling down clusters of storage nodes in Docker -- it isn't sufficient to just delete the containers as they need to be explicitly decommissioned and removed from the clusters.
If you scale up the clusters of storage nodes, you can monitor progress as new nodes join the clusters by running utils/show_cluster_state.sh.
If you can't or don't want to use Compose, you can turn the deployment up manually under Docker.
To prepare your system to deploy Clearwater without using Compose, after running the common preparation steps above, run:
# Build the Clearwater docker images.
cd clearwater-docker
for i in base memcached cassandra chronos bono ellis homer homestead ralf sprout ; do sudo docker build -t clearwater/$i $i ; done
To start the Clearwater services, run:
sudo docker network create --driver bridge clearwater_nw
sudo docker run -d --net=clearwater_nw --name etcd quay.io/coreos/etcd:v2.2.5 -name etcd0 -advertise-client-urls http://etcd:2379,http://etcd:4001 -listen-client-urls http://0.0.0.0:2379,http://0.0.0.0:4001 -initial-advertise-peer-urls http://etcd:2380 -listen-peer-urls http://0.0.0.0:2380 -initial-cluster etcd0=http://etcd:2380 -initial-cluster-state new
sudo docker run -d --net=clearwater_nw --name memcached -p 22 clearwater/memcached
sudo docker run -d --net=clearwater_nw --name cassandra -p 22 clearwater/cassandra
sudo docker run -d --net=clearwater_nw --name chronos -p 22 clearwater/chronos
sudo docker run -d --net=clearwater_nw --name homestead -p 22 clearwater/homestead
sudo docker run -d --net=clearwater_nw --name homer -p 22 clearwater/homer
sudo docker run -d --net=clearwater_nw --name ralf -p 22 clearwater/ralf
sudo docker run -d --net=clearwater_nw --network-alias=icscf.sprout --network-alias=scscf.sprout --name sprout -p 22 clearwater/sprout
sudo docker run -d --net=clearwater_nw --name bono --env-file .env -p 22 -p 3478:3478 -p 3478:3478/udp -p 5060:5060 -p 5060:5060/udp -p 5062:5062 clearwater/bono
sudo docker run -d --net=clearwater_nw --name ellis -p 22 -p 80:80 clearwater/ellis
The Clearwater Docker images use DNS for service discovery - they require, for example, that the name "ellis" should resolve to the Ellis container's IP address. In standard Docker, user-defined networks include an embedded DNS server which guarantees this (and this is why we create the clearwater_nw network) - and this type of DNS server is relatively common (for example, Kubernetes provides something similar).
It is possible to spin up additional Sprout, Cassandra, Memcached and Chronos nodes simply by repeating the relevant command docker run command but providing a different name. E.g.
sudo docker run -d --net=clearwater_nw --name memcached_2 -p 22 clearwater/memcached
Scaling of clearwater-docker deployments is work in progress though, so see the limitations described above (for scaling using Compose).
The deployment exposes
- the Ellis web UI on port 80 (exposed on port 8080) for self-provisioning - the signup key is "secret"
- STUN/TURN on port 3478 for media relay
- SIP on port 5060 for service
- SIP/WebSocket on port 5062 for service.
Additionally, each node exposes SSH - use sudo docker ps to see what port its exposed on. The username/password is root/root. Alternatively you can run a bash session in a container by name using e.g. sudo docker exec -it <container_name> bash
Once you've turned up the deployment, you can test it by
- making a call - make sure you configure your SIP clients with a proxy, as if it were an All-in-One node
- running the live tests - again, set the PROXY and ELLIS elements, as if it were an All-in-One node.
There are a few scripts that offer short cuts to querying aspects of your deployment:
# Show an abbreviated version of docker ps that fits without wrapping on smaller terminals
utils/short_ps.sh
# Show the IP addresses of the containers in your deployment
utils/show_ips.sh
# Query Chronos nodes over SNMP to get the number of active registrations
utils/show_registration_count.sh
# Show information about the state of the storage clusters
utils/show_cluster_state.sh
If you wish to destroy your deployment either to redeploy with a different configuration or version or to free up resources on your docker host, the following may be useful commands:
# To rebuild an image (rather than pull it from the cache), add `--no-cache` or `--force-recreate` to the build commands
sudo docker build --no-cache -t clearwater/base base
sudo docker-compose -f minimal-distributed.yaml up --force-recreate
# Remove all docker containers (not just Clearwater ones!)
sudo docker rm $(sudo docker ps -aq)
# Remove all the docker image files (not just Clearwater ones!)
sudo docker rmi $(sudo docker images -aq)
# Remove most of the docker image files, but not the Ubuntu 14.04 base
# image, use this if you intend to redeploy the clearwater deployment
# immediately to save time.
#
# This command will report an error due to a conflict, this can be safely
# ignored.
sudo docker rmi $(sudo docker images -a | tail -n +2 | grep -v "14.04" | tr -s ' ' | cut -f3 -d' ')
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent