guoyu07 / idea-cli-inspector

A little command-line tool to integrate the awesome IntelliJ IDEA code inspections in your continuous integration (CI) process using Jenkins, Bamboo, et. al.

IntelliJ IDEA CLI Inspector Wrapper idea-cli-inspector

A little command-line tool to integrate the awesome IntelliJ IDEA code inspections in your continuous integration (CI) process using Jenkins, Bamboo, et. al.

Why this tool?

IntelliJ IDEA offers a vast amount of very high-quality, built-in code inspections. Currently it has more than 1073 inspections to offer. Using project-shared inspection profiles it’s possible to guide developers in a wide range of coding aspects in a non-annoying way.

In contrast to well-known quality tools like SonarQube these inspections do have quite a few benefits:

• violations are instantly visible during code writing with freely configurable severities and warning levels. (i.e. bold red errors, yellow warning or discreet hints as recommendation)

• false alarms can be easily and immediately suppressed. A simple Alt-Enter directly at the location where they occur is enough.
  Alternatively you can adjust your inspection settings just on-the-fly (i.e. reduce level, disable inspection or configure inspection properties)

• IDEA allows you to check for new violations introduced with your changes while you are trying to commit them

• Many inspections in IDEA provide semi-automatic quickfixes and auto-corrections. So again sometimes addressing an issue is as simply as pressing Alt-Enter Right arrow Enter.

• Because all inspections are based on IDEA´s Psi engine (which is a sort of permanent running syntax compiler) the inspections effectively work on an actual AST. So IDEA understands the code and does not only look for (textual) patterns which in return leads to a significantly lower rate of false-positives.

Nevertheless, though IDEA offers on-the-fly analysis and error visualization it does not stop the developer in committing code violating these helpful guidelines into the project repository. JetBrain´s CI solution TeamCity does offer a easy and good integration. It is also possible to execute the IDEA project inspection on the command line, which will produce a hard-readable set of XML files and no further support for integrating this into an automated tool chain.

Therefore I did hack this little Groovy script to easily include & report inspection checks into your CI chain.

What it does

This tool is aimed to simplify the inclusion of IDEA code inspection in your CI chain. It executes a command-line based run of an IntelliJ inspection run. This produces a set of hardly human-readable XML files in the target directory.

Therefore the tool subsequently parses the generated inspection result files, allows to filter out selected result files and looks for messages with given severity (WARNING and ERROR by default).

The tool will list issues in a humand-readable form and exit with return code 1 if it did find any issues (your CI tool should interpret this as failure) or will happily tell you that everyhing is fine.

Prerequisites & Limitations

The script is developed in Groovy, so this has to be installed. Furthermore you need a valid installation of IntelliJ IDEA.

Note	Due to a limitation of IDEA itself it is not possible to run more than one IDEA instance at the same time. Therefore you must ensure, that no other IDEA is running on your PC / on your CI agents.

Usage

Configuration file base usage

IDEA CLI Inspector supports configuration via a .ideainspect file in the project root directory. Below is a example:

link:.ideainspect[role=include]

Command line based usage

For a full / up-to-date list of options please run ideainspect.groovy -h:

= IntellIJ IDEA Code Analysis Wrapper - v1.5.2 - @bentolor

This tools runs IntelliJ IDEA inspection via command line and
tries to parse the output.

Example usage:
  ./ideainspect.groovy -i ~/devel/idea -r . -p myinspections.xml \
     -d src/main/java -s unused,Annotator,TodoComment.xml -l ERROR

For more convenience you can pass all options in a `.ideainspect` file
instead of passing it via command line

usage: groovy ideainspect.groovy [options]
 -d,--dir <dir>           Limit IDEA inspection to this directory.
                          Overrides the scope argument.
 -h,--help                Show usage information and quit
 -i,--ideahome <dir>      IDEA or Android Studio installation home
                          directory. Default: IDEA_HOME env var or `idea`
 -ip,--iprops <file>      Full path to your `idea.properties`. Only
                          required if 1) you use --scope and 2) file is
                          not located under in the default.
                          Default: `<ideahome>/idea/bin/idea.properties`
 -l,--levels <level>      Levels to look for. Default: WARNING,ERROR
 -n,--dry-run             Dry-run: Do not start IDEA, but run parsing
 -p,--profile <file>      Use this inspection profile file located under
                          `.idea/inspectionProfiles`.
                          Default: `Project_Default.xml`
 -r,--rootdir <dir>       IDEA project root directory containing the
                          `.idea` directory. Default: Working directory
 -s,--skip <file>         Analysis result files to skip. For example
                          `TodoComment` or `TodoComment.xml`.
 -sc,--scope <string>     The name of the "Custom scope" to apply. Custom
                          scopes can be defined in the IDE. Share the
                          resulting file in .idea/scopes/scopename.xml and
                          provide the name of the scope (not file) here.
 -sf,--skipfile <regex>   Ignore issues affecting source files matching
                          given regex. Example: `.*/generated/.*`.
 -t,--resultdir <dir>     Target directory to place the IDEA inspection
                          XML result files.
                          Default: `target/inspection-results`
 -v,--verbose             Enable verbose logging

Example usage

$ groovy ideainspect.groovy \
    -i ~/devel/idea \
    -r ~/projects/p1 \
    -p myinspections.xml \
    -d server \
    -s unused,Annotator,TodoComment.xml \
    -l ERROR

This looks for a IntelliJ installation in ~/devel/idea, tries to perform a CLI-based code inspection run on the IDEA project ~/projects/p1/.idea with an inspection profile ~/projects/p1/.idea/inspectionProfiles/myinspections.xml limiting the inspection run to the subdirectory server within your project.

The IDEA inspection run will produce a set of .xml files. The amount, levels and result is based on the inspection profile you passed. Option -s tells to skip & ignore the warnings contained in the inspection result files unused.xml, Annotator.xml and TodoComment.xml. You can ommit the .xml suffix for convenience.

By default it will then look for entries marked as [WARNING] or [ERROR] within the remaining inspection result report files. In our case we only care for ERROR entries. If it finds entries, it will report the file joined with a description pointing to the file location and the inspection rule.

Example output

➜ idea-cli-inspector.git git:(master) ✗ ./ideainspect.groovy -i ~/devel/idea -r ../dashboard.git -p bens_idea15_2015_11.xml -d server -s Annotator,JSUnresolvedLibraryURL.xml,JavaDoc,TodoComment -l ERROR,WARNING

= IntellIJ IDEA Code Analysis Wrapper - v1.0 - @bentolor
#
# Running IDEA IntelliJ Inspection
#
Executing: /home/ben/devel/idea/bin/idea.sh [/home/ben/devel/idea/bin/idea.sh, inspect, /home/ben/projects/idea-cli-inspector.git/../dashboard.git, /home/ben/projects/idea-cli-inspector.git/../dashboard.git/.idea/inspectionProfiles/bens_idea15_2015_11.xml, /home/ben/projects/idea-cli-inspector.git/../dashboard.git/target/inspection-results, -d, server]
log4j:WARN No appenders could be found for logger (io.netty.util.internal.logging.InternalLoggerFactory).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
Please configure library 'Node.js v4.2.1 Core Modules' which is used in module 'client'

   ...
   IDEA spilling out quite a bunch of exceptions during inspection run
   ...

#
# Inspecting produced result files in ../dashboard.git/target/inspection-results
#
# Looking for: [[WARNING], [ERROR]]
# Ignoring : [Annotator, JSUnresolvedLibraryURL, JavaDoc, TodoComment]
--- ClassNamePrefixedWithPackageName.xml
[WARNING] server/src/main/java/de/foo/dashboard/data/DatasetVerticle.java:28 -- Class name <code>DatasetVerticle</code> begins with its package name #loc
[WARNING] server/src/main/java/de/foo/dashboard/data/DatasetBuilder.java:17 -- Class name <code>DatasetBuilder</code> begins with its package name #loc

--- InterfaceNamingConvention.xml
[WARNING] server/src/main/java/de/foo/dashboard/constants/Events.java:11 -- Interface name <code>Events</code> is too short (6 < 8) #loc

--- SameParameterValue.xml
[WARNING] server/src/main/java/de/foo/dashboard/data/DatasetBuilder.java:30 -- Actual value of parameter '<code>type</code>' is always '<code>de.exxcellent.dashboard.constants.DatasetType.ARRAY</code>'

--- Skipping JavaDoc.xml
--- Skipping TodoComment.xml
--- DeprecatedClassUsageInspection.xml
[WARNING] server/pom.xml:99 -- 'io.vertx.core.Starter' is deprecated

--- Skipping JSUnresolvedLibraryURL.xml
--- Skipping Annotator.xml
--- unused.xml
[WARNING] server/src/main/java/de/foo/dashboard/data/DatasetBuilder.java:40 -- Method is never used.
[WARNING] server/src/main/java/de/foo/dashboard/constants/DatasetType.java:14 -- Field has no usages.
[WARNING] server/src/main/java/de/foo/dashboard/constants/DatasetType.java:14 -- Field has no usages.
[WARNING] server/src/main/java/de/foo/dashboard/data/DatasetVerticle.java:28 -- Class is not instantiated.
[WARNING] server/src/main/java/de/foo/dashboard/transformers/History.java:23 -- Class is not instantiated.

#
# Analysis Result
#
Entries found. return code: 1

Troubleshooting & FAQ

My inspection runs very long and takes to much time. What can I do?

First: Introduce and use a new scope where you exclude all folders and/or include only those folders which are relevant for your inspection. Typical folders which are not relevant are i.e. node_modules, docs or build output folders. Secondly think about creating and using a custom inspection profile for the purpose of the CI. There you i.e. might disable all inspections with INFO/HINT level or i.e. the spell checking.

I receive a error message Please, specify sdk 'null' for module 'foo'

Probably you excluded misc.xml from the versionied IDEA project. Which is fine because this file is quite volatile. But this is the file where IDEA stores the "Root JDK".

To fix this error simply assign every module a SDK other than "Project SDK".

The analysis seems to produce different results on subsequent runs on the same sources (esp. JavaScript)

This seems to be an issue with the IDEA caches which IntelliJ keeps i.e. under .IntelliJ201X.X/system. Try if deleting this directory prior to executing the analysis runs produces stable results.

What shall I pass as IDEA home directory for Mac OSX?

/Applications/IntelliJ\ IDEA.app should be the default installation folder.

I’m using Android Studio and I can’t find idea.properties!

See the details about the location at http://tools.android.com/tech-docs/configuration

Scoping does not work?

First: Did you versionate the .idea/scope/scopename.xml file in your project? Did you specify the Custom scope name and not the filename?

If no, it might be that there is an issue that you are not pointing the --iprops option to the right idea.properties file or you i.e. don’t have write access for it.

Background information and troubleshooting: Unfortunately IDEA yet does not offer a direct CLI option for applying scope. Therefore we need to pass a System property entries via modifying the idea.properties file. Check the output of the script if you spot any issues during this process. Check the content of idea.properties during the run and look out for you scope name.

I receive different results in my IDE vs. on the CI server

Please check the following:

• ❏ Same version of IDEA installed on CI vs. you installation?

• ❏ Do you have the same plugins installed? Some bring own inspections or support fur understanding file formats (like .vue files with the vue plugin).

• ❏ Do you delete the .IntelliJ201X.X/system folder prior to every run on CI (see above)?

Source code & Contributions

The source code is located under https://github.com/bentolor/idea-cli-inspector.

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.

You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0