h-rat / evilcrowrf_custom_firmware_cc1101_flipperzero Goto Github PK

The firmware does not work for me, I flashed through web resource and esptool, but the original firmware from the inventor of the device works without problems...
I bought the device on aliexpress EvilCrowRF v2 can you have any idea why so get?

on the title. I use 2 evil crow rf v.2. on main evil crow connect to hotspot or my AP.
when I need to play rolljam attack. I need to re-config main evil crow back to AP mode. sometime I forgot default ssid and password it waste time to search about this.
can you advice this for config jamming device

I hope this message finds you well. I'm writing to highlight a significant issue with the custom firmware compared to the original EvilCrowRF-V2 firmware.

Issue Description:
After installing this custom firmware, I've encountered problems with battery compatibility and power management. Unlike with the original firmware, the device struggles to maintain power and behaves unpredictably with the same battery setup that functions flawlessly on the original firmware.

Reference to Original Firmware:
The original firmware, developed by Joel Serna and outlined in the EvilCrowRF-V2 GitHub repository, effectively manages power, as seen in its "Power Management" section. This discrepancy is concerning as it impacts the device's reliability and efficiency.

Thank you for considering my feedback. I am keen to see improvements that align the custom firmware's battery management with the original's capabilities and continue my support for the EvilCrowRF project.

Best regards,

Marceloapd

I put my api token in and saved it and am running the latest firmware. Every time I try to analyze a signal it says "please check internet connection". I tried on my phone, on my pc with a ethernet connection and still no luck. I tried turning off ap mode and still nothing.

hi , can you pls help me to wire up parts together ? i don't know which pins of esp32 must be connected to cc1101 or Sd adapter and etc.

Hi, where can I find the source code for this project so that I may compile my own version? It appears that only precompiled binaries are available.

when will it be released

Can't scan.
The rest is fine

The whole spirit of GitHub is to publish the source code so everyone can take advantage and share the code within the community?

just updated to the beta that was just released. It seems that when trying to perform a rollback or rolljam attack that the transmission being received is not being captured correctly. To be more specific it is showing that the signal has been captured but the area that usually shows the binary is blank and when i click on replay I get an error saying that the transmission was not saved... Anyone else having this issue?

Thanks.

h-RAT,
Thanks for this sharing. Trying to make one button a bit confused the pin for Button 1,2 and 3. Would you please tell me? Thanks in Advance

Hello, how are you?
I recently acquired 2 Evil Crow for testing
Both came with another, older firmware, I accessed the firmware of both and updated via the web at 192.168.4.1/update

However, after the update, only one of the Evil Crows worked correctly with the new firmware.

The other evil crow changed the name of the wifi network to ECRF but when accessing 192.168.4.1, it does not load the configured home page.
However, if I type 192.168.4.1/update the update page loads.

I've tested other SD cards, I've tested it on several computers, I've reinstalled the old firmware, the new firmware too and still have the same problem, do you know how to help me?

thanks!

Hello! Thank you very much for your efforts, great firmware. Do you plan to add a mouseJacking feature in the future?

How can I put my evil crow rf v2 in download mode to flash firmware?
I have been receiving this error below in ESPHome-flasher when installing the firmware:

Using 'COM10' as serial port.
Connecting......................................
Unexpected error: ESP is not in flash boot mode. If your board has a flashing pin, try again while keeping it pressed.

Thank you so much!