Fast, concurrent, evicting in-memory cache written to keep big number of entries without impact on performance. BigCache keeps entries on heap but omits GC for them. To achieve that operations on bytes arrays take place, therefore entries (de)serialization in front of the cache will be needed in most use cases.
Usage
Simple initialization
import "github.com/allegro/bigcache"
cache, _ := bigcache.NewBigCache(bigcache.DefaultConfig(10 * time.Minute))
cache.Set("my-unique-key", []byte("value"))
entry, _ := cache.Get("my-unique-key")
fmt.Println(string(entry))
Custom initialization
When cache load can be predicted in advance then it is better to use custom initialization because additional memory allocation can be avoided in that way.
import (
"log"
"github.com/allegro/bigcache"
)
config := bigcache.Config {
// number of shards (must be a power of 2)
Shards: 1024,
// time after which entry can be evicted
LifeWindow: 10 * time.Minute,
// rps * lifeWindow, used only in initial memory allocation
MaxEntriesInWindow: 1000 * 10 * 60,
// max entry size in bytes, used only in initial memory allocation
MaxEntrySize: 500,
// prints information about additional memory allocation
Verbose: true,
// cache will not allocate more memory than this limit, value in MB
// if value is reached then the oldest entries can be overridden for the new ones
// 0 value means no size limit
HardMaxCacheSize: 8192,
// callback fired when the oldest entry is removed because of its
// expiration time or no space left for the new entry. Default value is nil which
// means no callback and it prevents from unwrapping the oldest entry.
OnRemove: nil,
}
cache, initErr := bigcache.NewBigCache(config)
if initErr != nil {
log.Fatal(initErr)
}
cache.Set("my-unique-key", []byte("value"))
if entry, err := cache.Get("my-unique-key"); err == nil {
fmt.Println(string(entry))
}
Benchmarks
Three caches were compared: bigcache, freecache and map. Benchmark tests were made using an i7-6700K with 32GB of RAM on Windows 10.
Writes and reads
cd caches_bench; go test -bench=. -benchtime=10s ./... -timeout 30m
BenchmarkMapSet-8 2000000 716 ns/op 336 B/op 3 allocs/op
BenchmarkConcurrentMapSet-8 1000000 1292 ns/op 347 B/op 8 allocs/op
BenchmarkFreeCacheSet-8 3000000 501 ns/op 371 B/op 3 allocs/op
BenchmarkBigCacheSet-8 3000000 482 ns/op 303 B/op 2 allocs/op
BenchmarkMapGet-8 5000000 309 ns/op 24 B/op 1 allocs/op
BenchmarkConcurrentMapGet-8 2000000 659 ns/op 24 B/op 2 allocs/op
BenchmarkFreeCacheGet-8 3000000 541 ns/op 152 B/op 3 allocs/op
BenchmarkBigCacheGet-8 3000000 420 ns/op 152 B/op 3 allocs/op
BenchmarkBigCacheSetParallel-8 10000000 184 ns/op 313 B/op 3 allocs/op
BenchmarkFreeCacheSetParallel-8 10000000 195 ns/op 357 B/op 4 allocs/op
BenchmarkConcurrentMapSetParallel-8 5000000 242 ns/op 200 B/op 6 allocs/op
BenchmarkBigCacheGetParallel-8 20000000 100 ns/op 152 B/op 4 allocs/op
BenchmarkFreeCacheGetParallel-8 10000000 133 ns/op 152 B/op 4 allocs/op
BenchmarkConcurrentMapGetParallel-8 10000000 202 ns/op 24 B/op 2 allocs/op
Writes and reads in bigcache are faster than in freecache. Writes to map are the slowest.
GC pause time
cd caches_bench; go run caches_gc_overhead_comparison.go
Number of entries: 20000000
GC pause for bigcache: 5.8658ms
GC pause for freecache: 32.4341ms
GC pause for map: 52.9661ms
Test shows how long are the GC pauses for caches filled with 20mln of entries. Bigcache and freecache have very similar GC pause time. It is clear that both reduce GC overhead in contrast to map which GC pause time took more than 10 seconds.
How it works
BigCache relies on optimization presented in 1.5 version of Go (issue-9477).
This optimization states that if map without pointers in keys and values is used then GC will omit its content.
Therefore BigCache uses map[uint64]uint32
where keys are hashed and values are offsets of entries.
Entries are kept in bytes array, to omit GC again. Bytes array size can grow to gigabytes without impact on performance because GC will only see single pointer to it.
Bigcache vs Freecache
Both caches provide the same core features but they reduce GC overhead in different ways.
Bigcache relies on map[uint64]uint32
, freecache implements its own mapping built on
slices to reduce number of pointers.
Results from benchmark tests are presented above. One of the advantage of bigcache over freecache is that you don’t need to know the size of the cache in advance, because when bigcache is full, it can allocate additional memory for new entries instead of overwriting existing ones as freecache does currently. However hard max size in bigcache also can be set, check HardMaxCacheSize.
HTTP Server
This package also includes an easily deployable HTTP implementation of BigCache, which can be found in the server package.
More
Bigcache genesis is described in allegro.tech blog post: writing a very fast cache service in Go
License
BigCache is released under the Apache 2.0 license (see LICENSE)