arduinoMakefile

This project is just a simple Makefile for Arduino. There are some Makefiles in the Web but all of them are complicated and some does not work properly for newer versions of Arduino. This Makefile is simple and just works!

It does:

Compiles your sketch, including the standard Arduino library required
Merge all files into a .elf and them translate it to a .hex file
Upload the .hex to Arduino's flash memory

WARNING[0]: it was tested only in Ubuntu GNU/Linux with Arduino Uno. Probably it'll work well in any GNU/Linux distribution or Mac OS with Arduino Duemilanove. Windows users: sorry, please use a better OS.

WARNING[1]: by now the feature of compiling external libraries (even standard libraries and third-party libraries) is not implemented. So, if you have some #include in your project, probably it won't work -- but don't be afraid, I'm working on this.

Why another Makefile?

The question was answered in the section above -- but I'm studying all the Makefiles for Arduino that I found in the Web and trying to implement the simplest way of doing it right. I've created a comprehensive list of Makefiles and I'm categorizing them.

Dependencies

You need to have installed:

Arduino IDE unpacked -- we just use the libraries' source code
gcc-avr, avr-libc and binutils-avr -- for compilation
avrdude -- for upload
make -- to interpret the Makefile

If you run Ubuntu or Debian, just execute this recipe:

sudo aptitude install gcc-avr avr-libc binutils-avr avrdude make
wget http://arduino.googlecode.com/files/arduino-0022.tgz
tar xfz arduino-0022.tgz

Usage

The head of Makefile is self-explanatory, please read the comments and change these variables:

# Sketch filename without .pde (should be in the same directory of Makefile)
SKETCH_NAME=Blink
# The port Arduino is connected
#  Uno, in GNU/linux: generally /dev/ttyACM0
#  Duemilanove, in GNU/linux: generally /dev/ttyUSB0
PORT=/dev/ttyACM0
# The path of Arduino IDE
ARDUINO_DIR=/home/alvaro/arduino-0022
# Boardy type: use "arduino" for Uno or "skt500v1" for Duemilanove
BOARD_TYPE=arduino
# Baud-rate: use "115200" for Uno or "19200" for Duemilanove
BAUD_RATE=115200

WARNING: you need to have the configuration for Arduino Uno at your avrdude.conf. For some strange reason, the avrdude.conf at the Arduino IDE package does not have Arduino Uno configuration, but it works if do you use the default avrdude configuration file for Ubuntu package (at /etc/avrdude.conf).

heldersi / arduinomakefile Goto Github PK