helins / linux-i2c.java

Use the standard Linux I2C API from the JVM

Linux-I2C

The Linux kernel provides a standard API for acting as an I2C master. Typically, a bus is available at /dev/i2c-X where X is the number of the bus. This Java library proposes an idiomatic interface while trying to remain semantically close to what Linux offers.

Here is a Clojure wrapper.

Usage

This is an overview.

Read the javadoc for more details.

In short

Those examples are meant to be short (no error checking).

import io.helins.linux.i2c.* ;

I2CBus bus = new I2CBus( "/dev/i2c-1" ) ;

Find out what a bus can do

I2CFunctionalities functionalities = bus.getFunctionalities() ;

bus.can( I2CFunctionality.TRANSACTIONS ) ;

bus.can( I2CFunctionality.READ_BYTE ) ;

Directly read or write an arbitrary amount of bytes

// Selects slave device with address 0x42.
//
bus.selectSlave( 0x42 ) ;

// Creates a buffer and sets the first 2 bytes.
// Then sends it to the slave.
//
I2CBuffer buffer = new I2CBuffer( 2 ).set( 0, 66 )
                                     .set( 1, 24 ) ;
bus.write( buffer ) ;

// Now, reads 1 byte from the slave.
//
bus.read( buffer ,
          1      ) ;

buffer.get( 0 ) ;

SMBUS operations

SMBUS is sort of a subset of I2C. Not every master of slave device support all those features.

// Selects slave device with address 0x42.
//
bus.selectSlave( 0x42 ) ;

// Just sends the RW bit without any data.
//
bus.quick( true ) ;

// Directly reads or writes a byte.
//
int b = bus.readByteDirectly() ;

bus.writeByteDirectly( 246 ) ;

// Reads or writes a byte or a short after specifying a command (aka register).
//
int b = bus.readByte( 66 ) ;

bus.writeByte( 66, 24 ) ;

int word = bus.readWord( 66 ) ;

bus.writeWord( 66, 746 ) ;

// Reads or writes a block of bytes (at most 32) after specifying a command.
//
I2CBlock blockWrite = new I2CBlock().set( 0, 12 )
                                    .set( 1, 24 )
                                    .set( 2, 48 ) ;

I2CBlock blockRead  = new I2CBlock() ;

bus.writeBlock( 66, blockWrite ) ;

int nBytes = bus.readBlock( 33, blockRead ) ;

// Executes a remote function call by sending a word after specifying a command
// and then reading one.
//
int word = bus.processCall( 66, 345 ) ;

// Similar but with several bytes.
//
int nBytes = bus.blockProcessCall( 66, blockWrite, blockRead ) ;

I2C transactions

Not every device support doing uninterrupted sequences of reads and/or writes, and some only support 1 message per transaction which defeats the purpose of having transactions in the first place.

The slave device is selected in each message.

// Transaction of 2 messages.
//
I2CTransaction trx = new I2CTransaction( 2 ) ;

// First message consists of sending 3 bytes.
//
trx.getMessage( 0 ).setAddress( 0x42 )
                   .setBuffer( new I2CBuffer( 3 ).set( 0, 66 )
                                                 .set( 1, 132 )
                                                 .set( 2, 264 ) ) ;

// Second message will read 3 bytes in another buffer.
//
I2CBuffer bufferReponse = new I2CBuffer( 3 ) ;

trx.getMessage( 1 ).setAddress( 0x42 )
                   .setFlags( new I2CFlags().set( I2CFlag.READ ) )
                   .setBuffer( bufferResponse ) ;

bus.doTransaction( trx ) ;

// Does something with the received data.
//
bufferResponse.get( 0 ) ; 

Finally

bus.close() ;

Tests

This library has been currently tested with a Raspberry Pi 3. An [Arduino sketch](../tree/main/arduino] is provided for either trying the library or running IO tests.

For running non IO-tests :

$ ./bin/test

For running tests with a connected Arduino :

$ ./bin/test_with_io

References

• i2c-bus.org, a great website about the I2C protocol.
• Short documentation about the native API.
• Explaination of I2C transactions.
• SMBUS protocol, a more or less subset of I2C.
• Summary of the SMBUS protocol.
• Native source regarding flags and functionalities.

License

Copyright © 2018 Adam Helinski

Licensed under the term of the Mozilla Public License 2.0, see LICENSE.

linux-i2c.java's Issues

Error while doing SMBus operation

I am facing this exception [0] when I am trying to do SMBus operation in an I2C bus (linux).
I can't understand why this exception happens. Can you please explain/guess the possibilities why I am facing this issue?
It have no idea while linux ioctl returns error. (Linux IO library).

[0] -

linux-i2c.java/src/main/java/io/helins/linux/i2c/SMBus.java

Line 308 in 140c725

throw new IOException( "Native error during SMBus operation : errno " + I2CBus.getErrno() ) ;