For all of you who need to run eggnoggplus on a raspberry pi to get frenzied parties instantly, EggnoggPI is for you.
In this readme, you will see how to setup a PI02W to autostart with EggnoggPI, so you only need to connect 2 controller, and a screen, power on the pi, and play !
- Raspberry PI02W
- Micro-SD Card (4GB)
- Mini-HDMI cable
- 5V 2.5A power supply
- AuviPal Hub Micro USB OTG 3 Ports + Power
- 2 PCS Wired USB NES Conroller Game Joypad
- For the case, use the 3D source files with 3D printer
Estimated total cost arround 50$
-
Hub Micro USB need to be connected on the Raspberry "USB port" (and not on the "Power port").
-
Plug the 2 USB NES Controller on the Hub Muicro USB.
First thing first, you'll need to install raspbian lite on your pi, you can do this just by downloading rpi-image from the official raspberry pi website https://www.raspberrypi.com/software
You'll then only need a minimum of 4Gb µSD card, and install raspbian lite 64 bit on it.
https://www.raspberrypi.com/documentation/computers/getting-started.html
Connect, setup Wi-Fi and run somes update.
sudo apt install -y git
git clone https://github.com/heuzef/eggnoggpi.git
cd eggnoggpi
sudo apt install -y ./box64.deb
sudo apt install --no-install-recommends -y ./eggnoggpi.deb # When the prompt ask for enabling nodm, choose "yes"
sudo reboot-
🇫🇷 Heuzef (heuzef.com) [email protected]
-
🇫🇷 FlutterBrony (admtz.fr) [email protected]
-
EGGNOGG+ by Madgarden (madgarden.net)
