hsand / pia-wg Goto Github PK

The PIA file generation still works but the file generated seems to have stopped working as of 1/3/22 after working for about 4 months without issue. The description does mention that PIA could change their API at any moment and break things. Well, I think it happened. Thanks anyway for the solution up until today :). OpenVPN still works with PIA but hopefully we can get WG back going.

I'm trying to set this up on Raspbian "buster." I followed the instructions, but when I run the last command:

sudo wg-quick up wg0

I get the following message:

wg-quick: 'wg0' already exists

And also now the device no longer has internet access while still being accessible over LAN.

not having been able to connect recently with the vpn, I also tried to recreate my wg0.conf file but nothing I receive anything from the vpn

When i come to the part of entering usn&pwd(all previous steps were successfully operated), I could enter the username but I'm not able to enter the password.

(venv) C:\Users\Downloads\pia-wg-master\pia-wg-master>python3 generate-config.py
Traceback (most recent call last):
File "C:\Users\Downloads\pia-wg-master\pia-wg-master\generate-config.py", line 1, in
from piawg import piawg
File "C:\Users\Downloads\pia-wg-master\pia-wg-master\piawg.py", line 1, in
import requests
ModuleNotFoundError: No module named 'requests'

Please excuse my lack of python knowledge. Your how-to is very user friendly, however I have a dependency error that I do not know how to resolve. Here is the text from the command line:

**ERROR: Cannot install -r requirements.txt (line 5) and urllib3==1.26.6 because these package versions have conflicting dependencies.

The conflict is caused by:
The user requested urllib3==1.26.6
requests 2.24.0 depends on urllib3!=1.25.0, !=1.25.1, <1.26 and >=1.21.1

To fix this you could try to:

1. loosen the range of package versions you've specified
2. remove package versions to allow pip attempt to solve the dependency conflict

ERROR: ResolutionImpossible: for help visit https://pip.pypa.io/en/latest/user_guide/#fixing-conflicting-dependencies**

Thank you for your assistance.

Hello, Thanks for this super helpful script! This may be a dead project but I'll ask anyway.

Would it be possible to add a port forwarding option?

(venv) PS C:\pia-wg-master> python generate-config.py
Traceback (most recent call last):
File "C:\pia-wg-master\generate-config.py", line 6, in
pia = piawg()
^^^^^^^
File "C:\pia-wg-master\piawg.py", line 16, in init
self.get_server_list()
File "C:\pia-wg-master\piawg.py", line 26, in get_server_list
data = json.loads(r.text.splitlines()[0])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\foxi\AppData\Local\Programs\Python\Python312\Lib\json_init_.py", line 346, in loads
return _default_decoder.decode(s)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\foxi\AppData\Local\Programs\Python\Python312\Lib\json\decoder.py", line 337, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\foxi\AppData\Local\Programs\Python\Python312\Lib\json\decoder.py", line 355, in raw_decode
raise JSONDecodeError("Expecting value", s, err.value) from None
json.decoder.JSONDecodeError: Expecting value: line 1 column 1 (char 0)

I used the tool to generate the config and it said everything worked but when I put this in my wireguard set up it doesn't work...

[Interface]
Address = 10.38.134.8
PrivateKey = <>
DNS = 10.0.0.243,10.0.0.242

[Peer]
PublicKey = <>
Endpoint = 46.246.3.218:1337
AllowedIPs = 0.0.0.0/0
PersistentKeepalive = 25

I encountered a problem when asked for my PIA credentials, it says "Error logging in, please try again ..."
I'm sure my credentials are working.
I tested several servers and all indicated this error to me.

I grabbed pia-wg today and installed python 3.10.2 and follow ed the readme.

Generate-config.py fails with "FileNotFoundError: [WinError 2] The system cannot find the file specified" and i have no idea why.

Here's my whole console output:

(venv2) D:\pia-wg-master\pia-wg-master>generate-config.py
Traceback (most recent call last):
File "D:\pia-wg-master\pia-wg-master\generate-config.py", line 9, in
pia.generate_keys()
File "D:\pia-wg-master\pia-wg-master\piawg.py", line 54, in generate_keys
self.privatekey = subprocess.run(['wg', 'genkey'], stdout=subprocess.PIPE, encoding="utf-8").stdout.strip()
File "C:\Users\username\AppData\Local\Programs\Python\Python310\lib\subprocess.py", line 501, in run
with Popen(*popenargs, **kwargs) as process:
File "C:\Users\username\AppData\Local\Programs\Python\Python310\lib\subprocess.py", line 966, in init
self._execute_child(args, executable, preexec_fn, close_fds,
File "C:\Users\username\AppData\Local\Programs\Python\Python310\lib\subprocess.py", line 1435, in _execute_child
hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
FileNotFoundError: [WinError 2] The system cannot find the file specified

Thanks for this useful piece of codes ! I use it regularly on my router to get PIA Wireguard working properly.

Is there any plan to implement the dedicated IP feature in your code ? I know it should be possible by providing somehow the unique token generated by PIA.

Hi! Thank you for the script, @hsand! Any chance you're interested in uploading it to pypi.org?

This would really simplify installation, especially for those who use pipx or don't mind installing it without venv.

Check: https://ipv6leak.com/
Fix: https://www.reddit.com/r/WireGuard/comments/nl2uxl/comment/gzgaxo8

- AllowedIPs = 0.0.0.0/0
+ AllowedIPs = 0.0.0.0/0, ::/0