isabella232 / codk-z

Curie Open Development Kit - Z

For Intel Community Support, product questions, or help troubleshooting, visit ICS: https://communities.intel.com/community/tech/intel-curie

|

Contents

• x86: Zephyr application
• ARC: Zephyr application

Supported Platforms

• Ubuntu 14.04 - 64 bit

Installation

mkdir -p ~/CODK && cd $_
git clone https://github.com/01org/CODK-Z.git
cd CODK-Z
make clone
sudo make install-dep
make setup
source ../zephyr/zephyr-env.sh

Compile

• x86: make compile-x86
• ARC: make compile-arc
• Both: make compile

Upload

Using USB/DFU

• x86: make upload-x86-dfu
• ARC: make upload-arc-dfu
• Both: make upload

Using JTAG

• x86: make upload-x86-jtag
• ARC: make upload-arc-jtag
• Both: make upload-jtag

Default app blinks the pin-13 LED on Arduino 101 board

BLE Firmware

Curie ODK requires an updated BLE firmware. If you're on a factory version, please update.
The script will prompt you to manually reset the board.

• BLE: make upload-ble-dfu

Debug

Connect JTAG and open three terminal tabs

Tab 1: Debug Server

make debug-server

Tab 2: x86

make debug-x86
(gdb) target remote localhost:3334

Tab 3: ARC

make debug-arc
(gdb) target remote localhost:3333