gprovision

Source code related to factory restore and provisioning (aka manufacture or imaging). Also includes buildroot files.

Written in go.

target architecture

x86 linux

This has only been tested on x86, but there shouldn't be much that is x86-specific. Buildroot is used to get a repeatable build of AMD64 utilities, as well as x86-32 libraries (one tool we use is only available in 32-bit versions).

known architecture-specific bits

A few ioctl's are used by their raw number, rather than by symbol. These numbers are unlikely to be portable. All uses should be in packages under hw/.

The type of the device (aka platform, variant) is currently determined from dmi/smbios values.

PCI is ubiquitous on x86 but not as common elsewhere. There is some pci-specific logic but probably not in any critical paths.

packages that may be of particular interest

provisioning, aka manufacture gprovision/pkg/mfg
factory restore gprovision/pkg/recovery
data erase gprovision/pkg/erase
linux /init binary gprovision/cmd/init, gprovision/pkg/init
- determines whether to erase, factory restore, or do normal boot
- or, with the appropriate build tag, provisions the unit
integ tests for the above
crystalfontz lcd code, including menus gprovision/pkg/hw/cfa
partitioning/formatting/bootability code for uefi and legacy gprovision/pkg/recovery/disk
flexible logging to multiple sinks (lcd, file, console) gprovision/pkg/log
appliance package identifies the hardware variant it's running on gprovision/pkg/appliance
config of ipmi account, password gprovision/pkg/hw/ipmi

proprietary/oss

Some packages couldn't be open sourced, and a few provided functionality that is absolutely required; for those, replacements were written and live under gprovision/pkg/oss. These packages are related to remote logging, record keeping, and factory restore data persistence.

To facilitate open source release while still using proprietary packages within genesys, gprovision/pkg/common (and subpackages) was added. This uses interfaces to abstract away exactly what package is providing the functionality. In a few dirs, you will find an oss.go file; internally, we use a proprietary.go in place of oss.go, to similar effect. These files have the effect of initializing interface vars in the aforementioned common package.

If you wish to customize gprovision's behavior, start by looking at the interfaces in common - re-implementing one or more of these may provide all you need.

not included

security

The code we could open source does not include a mechanism for secure storage of passwords. Password storage is required for the integ tests, so some sort of implementation was required. To discourage use of the simplistic and weak mechanism included in this code, it deliberately uses annoying passwords and emits warnings.

image creation

This code does not include anything to build the images (*.upd).

OTA

A mechanism for distribution of over-the-air updates is not included, nor is any sort of fleet status/control dashboard. This code does not (currently) integrate with mender.io but that's probably the most logical choice for those functionalities.

image

name

The image name must match a specific format: WIDGET.LNX.SHINY.YYYY-MM-DD.NNNN.upd

extension: .upd
prefix must match the string returned by common/strs.ImgPrefix()
- default is WIDGET.LNX.SHINY.
  - product: widget
  - os: lnx
  - hardware platform: shiny
remaining fields are date and a build number
- see recovery/archive package for additional info including sort algo

format

xz-compressed tarball
- xz must be invoked with the sha256 checksum option
- treated as invalid if:
  - xz signature is missing
  - xz checksum type is not sha256
  - xz checksum validation fails

content

a tarball of the root filesystem that will be laid down
- assumptions
  - systemd is the init system
  - systemd-networkd manages networking
  - /boot/norm_boot is the kernel built by mage in this repo, with embedded initramfs
on install, the kernel located under /boot in the image is compared to the previously installed kernel
- comparison is by build number, not kernel version
  - example: 4.19.16 (user@host) #300 SMP <timestamp> => build number is 300
  - use the kernel built here by mage
    - build number is set from an env var
  - kernel with higher number will overwrite the other
- do not include any boot-related files except the kernel; they will be ignored.
  - grub
  - grub menus
  - separate initramfs
  - etc
accounts
- admin must exist
- no accounts in the image (other than admin) should allow login
- factory restore will set password for admin account

file location

Factory restore looks for update files on the recovery volume, under Image/. The first image is written during provisioning. Others are the responsibility of your code to download/place. Note that factory restore verifies the checksum to avoid corruption, but this does not provide any guarantees that the image came from the right place.

Your download code should have additional safeguards, such as

signature verification
only allow downloads from a host under your control
only allow https downloads
pin the certificate for the download host
etc

building

Modules are not supported yet; at least one of our dependencies needs changes before it'll work with modules. This repo may also need changes for modules. Thus, you will need to have GOPATH set up.

Many packages can be built with go build, but the initramfs's, kernels, and integ tests require mage.

generated code

Generated code is used in a number of packages and (with the exception of protocol buffer code) isn't included in the repo. If go-bindata is present, go generate ./... will suffice; otherwise, mage bins:generate will fetch the correct version and generate code.

If you desire to re-generate pb code (for pkg/oss/pblog), remove disabled from the go:generate line in gen.go first. You'll need protoc installed, as well as the plugins for grpc and go.

PATH (for mage)

With bash on linux, run . ./bash_env.sh to set up your env. This adds bin/ to your PATH, runs dep ensure if it looks like you haven't, and lists mage targets.

For other shells, you'll need to update PATH to include the repo's /bin so that our mage is found before any version you may have installed.

TEMPDIR

For integ tests, your /tmp must have plenty of free space. If it has < 8GB or so, set the TEMPDIR env var to point to a dir that does have that much free space.

Passing tests delete their temp dirs, but failing tests generally do not. Re-running a failed integ test will delete temp dirs from previous runs of that test. This delete is done with a wildcard like test-gprov-erase*, so there is a slight but non-zero chance it would delete something it didn't create.

dep

dep is needed. Once installed, cd to the repo root and run dep ensure to download all dependencies.

mage

Using mage is not necessary for simple packages like the crystalfontz code, but it is needed for things like the kernels with embedded initramfs and for integ tests. These integ tests depend on env vars mage sets, and are skipped if the vars are not set.

Due to required dependencies, mage will not run until after you run dep - see its section above.

Mage targets (listed with mage -l) are case insensitive, and each corresponds to a public function in build/. For example, mage bins:embedded runs the function with signature func (Bins) Embedded(ctx context.Context).

qemu

qemu is also needed for integ tests. See build/qemu/ for a Dockerfile that'll build qemu and copy the necessary files out. A pre-built version is available on github under releases, and is automatically downloaded by mage.

protoc

Optional: protoc, the protocol buffer compiler, is only needed to regenerate code for pkg/oss/pblog.

kernel

All tools required to build the kernel are needed - gcc, flex, bison, make, binutils, etc. See kernel documentation for details.

kernel version

The kernel source to download is determined from the name of the linux-*.config file.

buildroot

Files in build/brx/ are inputs to build a cpio of non-go binaries. A pre-built version is available on github under releases, and is automatically downloaded by mage.

Known to work with...

Known to work with go v1.12.5 or higher, the latest dep, and protoc 3.x.

go packages

To pull in dependencies:

cd $GOPATH/src/gprovision
dep ensure

verify

Once that is done, running mage -l from any dir should print a list of targets. (This is automatically done when you source bash-env.sh, so generally this can be skipped.)

Targets are run like so:

mage tests:unit
- runs unit tests (but not the much more lengthy integ tests)

Known issues

The integ tests are occasionally flaky, as are the crystalfontz tests.

Shells out too much. u-root provides many packages we could use to avoid shelling out, but don't (yet).

Old images are never removed from the recovery volume. This means you will eventually run out of space, depending on volume size, image size, and frequency of pushing out images. Though this could be seen as the responsibility of the code downloading images...

Sequence

Provision, AKA manufacture

+---------+     +---------+
| Legacy  |     | UEFI    |
| PXEboot |     | PXEboot |
+----+----+     +----+----+
     |               |
     +-------+-------+
             |
             v
     +-------+-------+
     | provision.pxe |
     +-------+-------+
             |
             v
   +---------+----------+
   | load json from url |
   |  passed in kernel  |
   | parameter 'mfgurl' |
   +---------+----------+
             |
             v
 +-----------+-------------+
 | verify hardware specs,  |
 | download image & write  |
 |   to recovery volume,   |
 | write credentials, etc  |
 +-----------+-------------+
             |
             v
    +--------+---------+
    |  configure boot  |
    | (legacy or uefi) |
    +--------+---------+
             |
             v
        +----+-----+
        |  reboot  |
        +----------+

See Infrastructure below for off-device services that are required.

All boots after manufacture

  +--------+   +------+
  | Legacy |   | UEFI |
  |  boot  |   | boot |
  +----+---+   +---+--+
       |           |
       +-----+-----+
             |
             v
    +--------+--------+
    | "normal" kernel |
    +--------+--------+
             |
             v
     +-------+-------+
     | erase needed? |
     +--+----------+-+
        |          |
        v          v
      +-+--+    +--+--+
      | no |    | yes |
      +-+--+    +--+--+
        |          |
        |          v
        |      +---+---+     +--------+
        |      | erase +---->+ reboot |
        |      +-------+     +--------+
        |
        v
 +------+---------------+
 | locate primary drive |
 +----------+-----------+
            |
            v
+-----------+-----------+
| does flag file exist? |
+--+--------------+-----+
   |              |
   v              v
+--+-+         +--+--+
| no |         | yes |
+--+-+         +--+--+
   |              |
   |              v
   |       +------+--------+
   |       | all good,     |     +----------+
   |       | start systemd +---->+ eventual |
   |       | from primary  |     |  reboot  |
   |       +---------------+     +----------+
   v
 +-+---------------------+
 | start factory restore |
 +----------+------------+
            |
            v
 +----------+-------------------------+
 |                                    |       +--------+
 | find latest good image on recovery +------>+ reboot |
 | format primary & write image       |       +--------+
 | write network config               |
 | write flag file                    |
 | etc                                |
 |                                    |
 +------------------------------------+

Infrastructure for provisioning/manufacture

The integ tests (especially lifecycle and mfg) set up minimal infrastructure, which could be used as examples for some of the infrastructure.

For production, you will need the following:

DHCP and TFTP set up for PXEboot
- Setting up a network that will PXEboot both legacy and uefi can be painful. If you can get away with uefi-only, great!
- iPXE supports http transfers. They say this is far faster than tftp, so serve only the bare minimum (iPXE) from TFTP and everything else over http (assuming you use iPXE)
web server
- serve files needed by iPXE (if used) - menus, provisioning kernel
- serve file passed to kernel as mfgurl, and files referenced by that file
  - when booting provisioning.pxe, pass in an arg like mfgurl=http://1.2.3.4/blah/manufData.json
  - content: see below
log server
- collects logs produced by devices being imaged
- included implementation (cmd/util/pbLogServer, pkg/oss/pblog/server) bundles additional functionality
  - password generation & storage
  - qa doc printing
  - other record keeping
  - web server for viewing logs

mfgurl / manufData.json

format: json
lists additional files needed, common to all hardware variants
- image
- kernel
- (optional) other files to write to recovery volume
specific to a particular variant:
- hardware characteristics for validation (# cpus, pci devices present, etc)
- additial configuration steps

As an example, see doc/manufDataSample.json.

Exactly what variant a device is, is determined by the appliance package. That package primarily uses dmi/smbios fields.

If this repo interests you...

Third party repos that cover similar topics:

github.com/u-root/u-root
github.com/gokrazy/gokrazy
github.com/mendersoftware/mender
github.com/sbabic/swupdate

isabella232 / gprovision Goto Github PK

gprovision's Introduction