Copyright (C) 2020 Western Digital Corporation or its affiliates.
libzbd is a library providing functions simplifying access to zoned block device information and the execution of zone management operations.
An example command line application using libzbd is available under the tools directory. Additionally, graphical user interface applications are also implemented to visually represent the state and usage of zones of a zoned block device.
libzbd is distributed under the terms of the of the GNU Lesser General Public License Version 3 or any later verison ((SPDX: LGPL-3.0-or-later). A copy of this license with libzbd copyright can be found in the file LICENSES/LGPL-3.0-or-later.txt.
All example applications under the tools directory are distributed under the terms of the GNU General Public License version 3, or any later version. A copy of this license can be found in the file LICENSES/GPL-3.0-or-later.txt.
If libzbd license files are missing, please see the LGPL version 3 text here and the GPL version 3 text here.
All source files in libzbd contain the LGPL v3 or GPL v3 license SPDX short identifiers in place of the full license text.
SPDX-License-Identifier: LGPL-3.0-or-later
SPDX-License-Identifier: GPL-3.0-or-later
Some files such as the .gitignore file are public domain specified by the
CC0 1.0 Universal (CC0 1.0) Public Domain Dedication. These files are
identified with the following SPDX header.
SPDX-License-Identifier: CC0-1.0
See the file [LICENSES/CC0-1.0.txt] for the full text of this license.
libzbd and all its example applications are distributed "as is," without technical support, and WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Contributions are accepted as github pull requests or via email (git send-email patches). Any problem may also be reported through github issues
page or by contacting:
- Damien Le Moal ([email protected])
- Niklas Cassel ([email protected])
PLEASE DO NOT SUBMIT CONFIDENTIAL INFORMATION OR INFORMATION SPECIFIC TO DRIVES THAT ARE VENDOR SAMPLES OR NOT PUBLICLY AVAILABLE.
libzbd requires the following packages for compilation:
- autoconf
- autoconf-archive
- automake
- libtool
Since libzbd uses Linux(tm) kernel zoned block device interface, compilation must be done on a system which has the header files for kernel version 4.10 or later.
To automatically enable compiling the gzbd and gzbd-viewer graphical applications, GTK3 and GTK3 development packages must be installed.
To compile the library and all example applications under the tools directory, execute the following commands.
$ sh ./autogen.sh
$ ./configure
$ make
To install the library and all example applications compiled under the tools directory, execute the following command.
$ sudo make install
The library files are by default installed under /usr/lib (or /usr/lib64).
The library header file is installed under /usr/include/libzbd.
The executable files for the example applications are installed under
/usr/bin.
These default installation paths can be changed. Executing the following command displays the options used to control the installation paths.
$ ./configure --help
To build redistributable libzbd rpm packages, the source tree must be configured as follows.
$ ./configure --enable-rpm
This command will check for the availability of the rpm and rpmbuild utilities which are mandatory to build libzbd RPM packages. Once configured, the RPM packages can be built using the following command.
$ make rpm
Three RPM packages are built: a binary package providing the library and executable tools, a development package providing libzbd header files and a source RPM package. debuginfo and debugsource packages are also built.
The source RPM package can be used to build the binary and development RPM packages outside of libzbd source tree using the following command.
$ rpmbuild --rebuild libzbd-<version>.src.rpm
libzbd defines a set of functions and data structures simplifying the management and use of zoned block devices.
libzbd functions and data structures are defined in the header file
[include/libzbd/zbd.h]. Applications using libzbd must include this header
file and compile against libzbd using dynamic linking (libzbd.so library
file) or statically linking using the libzbd.a archive file.
libzbd internal implementation is simple. No internal library state is maintained at run-time, with the exception of a list of open zoned block device. Data types and units used by regular file access system calls are reused.
- Open zoned block device files are identified using a file descriptor similar to one that the open() system call returns.
- Zone information such as zone start position, zone size and zone write pointer position use Byte unit, the same unit as used by system calls such as fseek(), read() or write() for file offset position and I/O buffer sizes.
libzbd provides data structures for describing zones of a zoned block device (struct zbd_zone) and providing information about the device itself (struct zbd_info).
libzbd implements the following functions.
| Function | Description |
|---|---|
| zbd_device_is_zoned() | Test if a block device is a zoned block device |
| zbd_open() | Open a zoned block device |
| zbd_close() | Close a zoned block device |
| zbd_get_info() | Get an open zoned block device information |
| zbd_report_zones() zbd_list_zones() |
Get zone information of an open device |
| zbd_report_nr_zones() | Get the number of zones of an open device |
| zbd_zone_operation() | Execute a zone management operation |
| zbd_reset_zones() | Reset the write pointer position of a range of zones |
| zbd_open_zones() | Explicitly open a range of zones |
| zbd_close_zones() | Explicitly close a range of open zones |
| zbd_finish_zones() | Finish a range of zones |
The following macro definitions are defined to facilitate manipulation of a zone descriptor information (struct zbd_zone).
| Function | Description |
|---|---|
| zbd_zone_type() | Get a zone type (enum zbd_zone_type) |
| zbd_zone_cnv() | Test if a zone type is conventional |
| zbd_zone_swr() | Test if a zone type is sequential write required |
| zbd_zone_swp() | Test if a zone type is sequential write preferred |
| zbd_zone_seq() | Test if zone type is sequential (not conventional) |
| zbd_zone_cond() | Get a zone condition (enum zbd_zone_cond) |
| zbd_zone_not_wp() | Test if a zone is "not write pointer" (conventional zones) |
| zbd_zone_empty() | Test if a zone is empty |
| zbd_zone_imp_open() | Test if a zone is implicitly open |
| zbd_zone_exp_open() | Test if a zone is explicitly open |
| zbd_zone_is_open() | Test if a zone is open (implicitly or explicitly) |
| zbd_zone_closed() | Test if a zone is closed |
| zbd_zone_full() | Test if a zone is full |
| zbd_zone_rdonly() | Test if a zone is read-only |
| zbd_zone_offline() | Test if a zone is offline |
| zbd_zone_start() | Get a zone start position (bytes) |
| zbd_zone_len() | Get a zone size (bytes) |
| zbd_zone_capacity() | Get a zone capacity (bytes) |
| zbd_zone_wp() | Get a zone write pointer position (bytes) |
| zbd_zone_flags() | Get a zone state flags |
| zbd_zone_rwp_recommended() | Test if a zone indicates reset write pointer recommended |
| zbd_zone_non_seq_resources() | Test if a zone indicates using non-sequential write resources |
The followimg utility functions are also defined.
| Function | Description |
|---|---|
| zbd_set_log_level() | Set the logging level of the library functions |
| zbd_device_model_str() | Get a string describing a device zoned model |
| zbd_zone_type_str() | Get a string describing a zone type |
| zbd_zone_cond_str() | Get a string describing a zone condition |
Since libzbd does not maintain any internal state for open zoned block devices, that is, it does not dynamically maintain the zone state of open zoned block devices, no synchronization mechanism for multiple threads applications is implemented. It is the responsibility of the application to ensure that zones of a device are manipulated correctly with mutual exclusion when needed. This is in particular necessary for operations like concurrent write to the same zone by multiple threads or the execution of zone management operations while reading or writing the target zones.
libzbd functions and data types are documented in more details using code comments in the file [include/libzbd/zbd.h].
Under the tools directory, several simple applications are available as examples. These appliations are as follows.
-
zbd This application execute zone commands on a device.
-
gzbd provides a graphical user interface showing zone information of a zoned block device. It also displays the write status (write pointer position) of zones graphically using color coding (red for written space and green for unwritten space). Operations on zones can also be executed directly from the interface (reset zone write pointer, open zone, close zone, etc).
-
gzbd-viewer provides a simple graphical user interface showing the write pointer position and zone state of zones of a zoned block device. Similar color coding as gzbd is used. This application automatically refresh the device zone information after a configurable timeout elapses. The default refresh cycle is 2 times per seconds (500 ms).
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent