Overlaybd

Overlaybd is a novel layering block-level image format, which is design for container, secure container and applicable to virtual machine. And it is an open-source implementation of paper DADI: Block-Level Image Service for Agile and Elastic Application Deployment. USENIX ATC'20".

Overlaybd is based on PhotonLibOS, which is a high-efficiency LibOS framework.

Overlaybd has 2 core component:

Overlaybd is a block-device based image format, provideing a merged view of a sequence of block-based layers as a virtual block device.
Zfile is a compression file format which support seekalbe online decompression.

This repository is an implementation of overlaybd based on TCMU.

Overlaybd can be used as the storage backend of Accelerated Container Image, which is a solution of remote container image by fetching image data on-demand without downloading and unpacking the whole image before the container starts.

Benefits from the universality of block-device, overlaybd is also a widely applicable image format for most runtime, including qemu/kvm and any other runtime supporting block or scsi api.

Overlaybd is a non-core sub-project of containerd.

Setup

System Requirements

Overlaybd provides virtual block devices through TCMU, so the TCMU kernel module is required. TCMU is implemented in the Linux kernel and supported by most Linux distributions.

Check and load the target_core_user module.

modprobe target_core_user

Install From RPM/DEB

You may download our RPM/DEB packages form Release and install.

The binaries are install to /opt/overlaybd/bin/.

Run /opt/overlaybd/bin/overlaybd-tcmu and the log is stored in /var/log/overlaybd.log.

It is better to run overlaybd-tcmu as a service so that it can be restarted after unexpected crashes.

Build From Source

Requirements

To build overlaybd from source code, the following dependencies are required:

CMake >= 3.11
gcc/g++ >= 7
Libaio, libcurl, libnl3, glib2 and openssl runtime and development libraries.
- CentOS/Fedora: sudo yum install libaio-devel libcurl-devel openssl-devel libnl3-devel
- Debian/Ubuntu: sudo apt install libcurl4-openssl-dev libssl-dev libaio-dev libnl-3-dev libnl-genl-3-dev libgflags-dev

Build

You need git to checkout the source code:

git clone https://github.com/containerd/overlaybd.git
cd overlaybd
git submodule update --init

The whole project is managed by CMake. Binaries and resource files will be installed to /opt/overlaybd/.

mkdir build
cd build
cmake ..
make -j
sudo make install

If you want to use DSA hardware to accelerate CRC calculation.

cmake -D ENABLE_DSA=1 ..

If you want to use avx512 to accelerate CRC calculation.

cmake -D ENABLE_ISAL=1 ..

If you want to use QAT to accelerate compression/decompression.

cmake -D ENABLE_QAT=1 ..

For more informations go to overlaybd/src/overlaybd/zfile/README.md.

Finally, setup a systemd service for overlaybd-tcmu backstore.

sudo systemctl enable /opt/overlaybd/overlaybd-tcmu.service
sudo systemctl start overlaybd-tcmu

Configuration

overlaybd config

Default configure file overlaybd.json is installed to /etc/overlaybd/.

{
    "logLevel": 1,
    "logPath": "/var/log/overlaybd.log",
    "registryCacheDir": "/opt/overlaybd/registry_cache",
    "registryCacheSizeGB": 1,
    "credentialFilePath": "/opt/overlaybd/cred.json",
    "ioEngine": 0,
    "download": {
        "enable": true,
        "delay": 120,
        "delayExtra": 30,
        "maxMBps": 100
    },
    "enableAudit": true,
    "auditPath": "/var/log/overlaybd-audit.log"
}

Field	Description
logLevel	DEBUG 0, INFO 1, WARN 2, ERROR 3
ioEngine	IO engine used to open local files: psync 0, libaio 1, posix aio 2.
logPath	The path for log file, `/var/log/overlaybd.log` is the default value.
registryCacheDir	The cache directory for remote image data.
registryCacheSizeGB	The max size of cache, in GB.
cacheType	Cache type used, `file` and `ocf` are supported, `file` is the default.
credentialFilePath	The credential used for fetching images on registry. `/opt/overlaybd/cred.json` is the default value.
download.enable	Whether background downloading is enabled or not.
download.delay	The seconds waiting to start downloading task after the overlaybd device launched.
download.delayExtra	A random extra delay is attached to delay, avoiding too many tasks started at the same time.
download.maxMBps	The speed limit in MB/s for a downloading task.
enableAudit	Enable audit or not.
auditPath	The path for audit file, `/var/log/overlaybd-audit.log` is the default value.

NOTE: download is the config for background downloading. After an overlaybd device is lauched, a background task will be running to fetch the whole blobs into local directories. After downloading, I/O requests are directed to local files. Unlike other options, download config is reloaded when a device launching.

credential config

Here is an example of credential file described by credentialFilePath field.

{
  "auths": {
    "hub.docker.com": {
      "username": "username",
      "password": "password"
    },
    "hub.docker.com/hello/world": {
      "auth": "dXNlcm5hbWU6cGFzc3dvcmQK"
    }
  }
}

Credentials are reloaded when authentication is required. Credentials have to be updated before expiration if temporary credential is used, otherwise overlaybd keeps reloading until a valid credential is set.

Important: The corresponding credential has to be set before launching devices, if the registry is not public.

Usage

Use with containerd

Please install overlaybd and refer to Accelerated Container Image. Overlaybd is well integrated with containerd and easy to use.

Standalone Usage

For other scenarios, users can use overlaybd manually. Overlaybd works as a backing store of TCMU, so users can run overlaybd image by interacting with configfs.

Config file

A config file is required to describe an overlaybd image, only local image and registry image are supported. Here is a sample json config file:

{
      "repoBlobUrl": "https://obd.cr.aliyuncs.com/v2/overlaybd/sample/blobs",
      "lowers" : [
          {
              "file" : "/opt/overlaybd/layer0"
          },
          {
              "dir": "/var/lib/containerd/root/io.containerd.snapshotter.v1.overlayfs/snapshots/1000",
              "digest": "sha256:e3b0d67cfa3a37dfed187badc7766e3db64d492c4db2dc4260997b41af1b28f3",
              "size": 43446424
          }
      ],
      "resultFile": "/home/overlaybd/1/result"
}

Field	Description
repoBlobUrl	the url of the repository blobs of the remote image. It is required for a registry image.
lowers	a list describing the lower layers of the image in bottom-upper order.
file	it means the corresponding layer is a local file. if a local file is used, other options are not needed.
dir	it means the corresponding layer will be stored in this directory after downloading.
digest and size	the digest and size of a remote layer. It is required for a remote layer.
resultFile	the file for saving the failure reasons. If a device is successfully lauched, success is writen into the file, otherwise, the failure s reported by this file.

Start up

Here is an example to start up an overlaybd image. First, create the overlaybd tcmu device.

mkdir -p /sys/kernel/config/target/core/user_1/vol1
echo -n dev_config=overlaybd//root/config.v1.json > /sys/kernel/config/target/core/user_1/vol1/control
echo -n 1 > /sys/kernel/config/target/core/user_1/vol1/enable

Then, create a tcm loop device.

mkdir -p /sys/kernel/config/target/loopback/naa.123456789abcdef/tpgt_1/lun/lun_0
echo -n "naa.123456789abcdef" > /sys/kernel/config/target/loopback/naa.123456789abcdef/tpgt_1/nexus
ln -s /sys/kernel/config/target/core/user_1/vol1 /sys/kernel/config/target/loopback/naa.123456789abcdef/tpgt_1/lun/lun_0/vol1

Then a block device /dev/sdX is generated, overlaybd image can be used locally. Furthermore, overlaybd device can be used on remote hosts by iscsi.

Clean up

Just remove the files and directories in configfs in reverse order.

Writable layer

Overlaybd provides a log-structured writable layer and a sprase-file writable layer. Log-structured layer is append only and converts all writes into sequential writes so that the image build/convert process is usually faster. Sparse-file writable layer is more suitable for container rutime.

Use overlaybd-create to create a writable layer.

  /opt/overlaybd/bin/overlaybd-create ${data_file} ${index_file} ${virtual size}

use -s to for creating sparse-file writable layer. The upper option in overlaybd config file must be set to use a writable layer. Only one writable layer is avialable and it always workes as the top layer.Example:

{
    "repoBlobUrl": ...,
    "lowers" : [
        ...
    ],
    "upper": {
        "index": "${index_file}",
        "data": "${data_file}"
    },
    "resultFile": "/home/overlaybd/1/result"
}

If upper is set, the overlaybd device is launched as a writable device. The differences produced by data writing are stored in the index and data files ofupper.

After writing data and destroying the device, overlaybd-commit command is required to excute to commit the layer into a read-only layer and can be used asa lower layer later.

/opt/overlaybd/bin/overlaybd-commit ${data_file} ${index_file} ${commit_file}

At last, compression may be needed.

/opt/overlaybd/bin/overlaybd-zfile ${commit_file} ${zfile}

The zfile can be used as lower layer with online decompression.

Kernel module

DADI_kmod is a kernel module of overlaybd. It can make local overlaybd-format files as a loop device or device-mapper.

Contributing

Welcome to contribute! CONTRIBUTING

Licenses

Overlaybd is released under the Apache License, Version 2.0.

isabella232 / overlaybd Goto Github PK

overlaybd's Introduction