isabella232 / redfish-usecase-checkers

This is a collection of python3 tools to exercise and validate common use cases for Redfish

Redfish Usecase Checkers

Copyright 2017-2021 DMTF. All rights reserved.

About

    Language: Python 3.x

This is a collection of tools to exercise and validate common use cases for DMTF Redfish. For example:

• Issue system reset commands (On, GracefulShutdown, GracefulRestart, etc.)
• Issue PATCH requests for boot override modes, modifying BIOS/UEFI boot sequence
• Add/modify/delete user accounts

Prerequisites

Install jsonschema, redfish, and redfish_utilities:

pip install jsonschema
pip install redfish
pip install redfish_utilities

Test Details and Examples

Each tool may be execuated with the -h option to get verbose help on parameters.

One Time Boot Checker

This checker logs into a specified service and traverses the systems collection. It will perform the following operations on all systems:

• Reads the Boot object
• Sets the BootSourceOverrideTarget property to either Pxe or Usb, depending on what's allowed
• Performs a reset of the system
• Monitors the BootSourceOverrideTarget property after the reset to ensure it changes back to None

Example:

$ python3 one_time_boot_check.py -r 127.0.0.1:8000 -u <user> -p <pass> -S Always

Power/Thermal Info Checker

This checker logs into a specified service and traverses the chassis collection. For each chassis found, it will ensure that it can collect at least one sensor reading from the Power and Thermal resources. For each sensor reading found, it will ensure that the readings are consistent with the state of the sensor, as in there are no bogus readings for a device that isn't present.

Example:

$ python3 power_thermal_test.py -r 127.0.0.1:8000 -u <user> -p <pass> -S Always

Power Control Checker

This checker logs into a specified service and traverses the system collection. It will perform the following operations on all systems:

• Reads the allowable ResetType parameter values
• Performs a reset using each of the allowable ResetType values

Example:

$ python3 power_control.py -r 127.0.0.1:8000 -u <user> -p <pass> -S Always

Account Management Checker

This checker logs into a specified service and performs the following operations:

• Creates a new user
• Logs into the service with the new user
• Modifies the new user with different roles
• Deletes the new user

Example:

$ python3 account_management.py --r 127.0.0.1:8000 -u <user> -p <pass> -S Always

Query Parameter Checker

This checker logs into a specified service and performs the following operations:

• Inspects the ProtocolFeatures property to see what query parameters are supported
• Tests $filter on the role collection within the account service
• Tests $select on a role within the role collection within the account service
• Tests $expand on service root
• Tests only on various resources found on service root

Example:

$ python3 query_parameters_check.py --r 127.0.0.1:8000 -u <user> -p <pass> -S Always

Manager Ethernet Interface Checker

This checker logs into a specified service and traverses the Ethernet interface collection in each manager found in the manager collection. It will perform the following operations on all Ethernet interfaces:

• Inspects array properties to ensure null is used to show empty slots that a client is allowed to configure
• Inspects string properties containing IP addresses to ensure invalid addresses, such as 0.0.0.0, are not used
• Inspects IPv4 address properties to ensure Gateway is only present in the first array index
• Ensures the minimum number of expected properties for configuring VLANs and IP addresses are present

Example:

$ python3 manager_ethernet_interface_check.py --r 127.0.0.1:8000 -u <user> -p <pass> -S Always