isabella232 / riemann-firehose-nozzle

Summary

The influxdb-firehose-nozzle is a CF component which forwards metrics from the Loggregator Firehose to influxdb

Configure CloudFoundry UAA for Firehose Nozzle

The influxdb firehose nozzle requires a UAA user who is authorized to access the loggregator firehose. You can add a user by editing your CloudFoundry manifest to include the details about this user under the properties.uaa.clients section. For example to add a user influxdb-firehose-nozzle:

properties:
  uaa:
    clients:
      influxdb-firehose-nozzle:
        access-token-validity: 1209600
        authorized-grant-types: authorization_code,client_credentials,refresh_token
        override: true
        secret: <password>
        scope: openid,oauth.approvals,doppler.firehose
        authorities: oauth.login,doppler.firehose

Running

The influxdb nozzle uses a configuration file to obtain the firehose URL, influxdb API key and other configuration parameters. The firehose and the influxdb servers both require authentication -- the firehose requires a valid username/password and influxdb requires a valid API key.

You can start the firehose nozzle by executing:

go run main.go -config config/influxdb-firehose-nozzle.json"

Batching

The configuration file specifies the interval at which the nozzle will flush metrics to influxdb. By default this is set to 15 seconds.

slowConsumerAlert

For the most part, the influxdb-firehose-nozzle forwards metrics from the loggregator firehose to influxdb without too much processing. A notable exception is the influxdb.nozzle.slowConsumerAlert metric. The metric is a binary value (0 or 1) indicating whether or not the nozzle is forwarding metrics to influxdb at the same rate that it is receiving them from the firehose: 0 means the the nozzle is keeping up with the firehose, and 1 means that the nozzle is falling behind.

The nozzle determines the value of influxdb.nozzle.slowConsumerAlert with the following rules:

1. When the nozzle receives a TruncatingBuffer.DroppedMessages metric, it publishes the value 1. The metric indicates that Doppler determined that the client (in this case, the nozzle) could not consume messages as quickly as the firehose was sending them, so it dropped messages from its queue of messages to send.

2. When the nozzle receives a websocket Close frame with status 1008, it publishes the value 1. Traffic Controller pings clients to determine if the connections are still alive. If it does not receive a Pong response before the KeepAlive deadline, it decides that the connection is too slow (or even dead) and sends the Close frame.

3. Otherwise, the nozzle publishes 0.

Tests

You need ginkgo to run the tests. The tests can be executed by:

ginkgo -r

Deploying

Bosh

There is a bosh release that will configure, start and monitor the influxdb nozzle: https://github.com/cloudfoundry-incubator/influxdb-firehose-nozzle-release

Lattice

There is a docker image which can be used to deploy the influxdb nozzle to lattice. If you are running lattice locally with Vagrant, you can use the following command line to start the nozzle:

ltc create influxdb-nozzle cloudfoundry/influxdb-nozzle-lattice \
  -e NOZZLE_INFLUXDB_DATABASE=<DATABASE> \
  -e NOZZLE_INFLUXDB_USER=<USERNAME> \
  -e NOZZLE_INFLUXDB_PASSWORD=<PASSWORD> \
  -e NOZZLE_METRICPREFIX=<METRIC PREFIX>  --no-monitor

The API KEY is your influxdb API key used to publish metrics. The METRIC PREFIX gets prepended to all metric names going through the nozzle.

The docker image runs the nozzle with the config provided in lattice/lattice-influxdb-firehose-nozzle.json. If you are not running lattice locally you will have to also configure the traffic controller URL

ltc create influxdb-nozzle cloudfoundry/influxdb-nozzle-lattice \
  -e NOZZLE_INFLUXDB_DATABASE=<DATABASE> \
  -e NOZZLE_INFLUXDB_USER=<USERNAME> \
  -e NOZZLE_INFLUXDB_PASSWORD=<PASSWORD> \
  -e NOZZLE_METRIC_PREFIX=<METRIC PREFIX> \
  -e NOZZLE_TRAFFICCONTROLLERURL=<TRAFFICONTROLLER URL>

Any of the configuration parameters can be overloaded by using environment variables. The following parameters are supported

Environment variable	Description
NOZZLE_UAAURL	UAA URL which the nozzle uses to get an authentication token for the firehose
NOZZLE_USERNAME	User who has access to the firehose
NOZZLE_PASSWORD	Password for the user
NOZZLE_TRAFFICCONTROLLERURL	Loggregator's traffic controller URL
NOZZLE_FIREHOSESUBSCRIPTIONID	Subscription ID used when connecting to the firehose. Nozzles with the same subscription ID get a proportional share of the firehose
NOZZLE_INFLUXDB_URL	The influxdb API URL
NOZZLE_INFLUXDB_DATABASE	The database name used when publishing metrics to influxdb
NOZZLE_INFLUXDB_USER	The username name used when publishing metrics to influxdb
NOZZLE_INFLUXDB_PASSWORD	The password name used when publishing metrics to influxdb
NOZZLE_METRICPREFIX	The metric prefix is prepended to all metrics flowing through the nozzle
NOZZLE_DEPLOYMENT	The deployment name for the nozzle. Used for tagging metrics internal to the nozzle
NOZZLE_FLUSHDURATIONSECONDS	Number of seconds to buffer data before publishing to influxdb
NOZZLE_INSECURESSLSKIPVERIFY	If true, allows insecure connections to the UAA and the Trafficcontroller
NOZZLE_DISABLEACCESSCONTROL	If true, disables authentication with the UAA. Used in lattice deployments

CI

The concourse pipeline for the influxdb nozzle is present here: https://concourse.walnut.cf-app.com/pipelines/nozzles?groups=influxdb-nozzle