PANIC: unprotected error in call to Lua API (routing problem) about lorawangateway

[JaapBraam]

This looks OK...

When the gateway is started for the first time, it will restart several times to compile all sources.

When does your gateway restart with a 'routing problem' ? Just after boot or later on?

[webfrank]

Hi, after few minutes of received packets it reboots with that error. In data 1 marzo 2017 21:03:08 Jaap Braam <[email protected]> ha scritto:

…

This looks OK... When the gateway is started for the first time, it will restart several times to compile all sources. When does your gateway restart with a 'routing problem' ? Just after boot or later on? -- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: #17 (comment)

[JaapBraam]

I have never experienced that myself. My two gateways are running for weeks without reboots...

I see you use a freshly built nodemcu firmware, I use the firmware that's in the firmware directory. Maybe the newer version has introduced an instability.

You can try to flash the firmware from the firmware directory and check if the problem still occurs.

[webfrank]

Ok, I'll try In data 1 marzo 2017 23:52:46 Jaap Braam <[email protected]> ha scritto:

…

I have never experienced that myself. My two gateways are running for weeks without reboots... I see you use a freshly built nodemcu firmware, I use the firmware that's in the firmware directory. Maybe the newer version has introduced an instability. You can try to flash the firmware from the firmware directory and check if the problem still occurs. -- You are receiving this because you authored the thread. Reply to this email directly or view it on GitHub: #17 (comment)

[webfrank]

Problem is with otaa, with abp it works

[JaapBraam]

The difference between otaa and abp from the gateway's perspective is that when using abp the gateway doesn't have to transmit messages to nodes. Maybe the problem occurs when the gateway has to transmit a message. When you send a downlink to your abp node, the gateway has to transmit that message.

Can you send data to your node using downlink on TTN's console?

[JaapBraam]

The (routing problem) in the PANIC you report is triggered by the Espressif firmware (ESPCONN_RTE).

It looks like your ESP8266 is having network problems, check your wifi router...