jfwells / linux-asus-t100ta Goto Github PK

There are few questions:

• What precise versions of the driver and firmware (URLs, please!)?
• What the status of running this against vanilla kernel where AtomISPv2 (a version of) is pushed?

With this link you get at least the start of the subject of its forks:
https://github.com/search?p=5&q=linux-asus-t100ta+fork%3Atrue&ref=searchresults&type=Repositories&utf8=%E2%9C%93

For the t100ta-kernel you might use this link to not get all 22 thousand forkers of the main kernel:
https://github.com/search?p=5&q=t100ta-kernel+fork%3Atrue&ref=searchresults&type=Repositories&utf8=%E2%9C%93

Next step is that if you fork you maintain the visible part in this overview to see what your fork is for.

The manual prescribes this step:

Enable ISP for Linux in BIOS
When booting Bayley Bay target machine, the BIOS must be set with the right ISP PCI device. In the BIOS settings under "Uncore Configuration" set:

"ISP Enable/Disable" to Enable
"ISP PCI Device" to B0D3F0

This option is not available in a baytrail BIOS.
jfwells Bayley Bay board was some early prototype-board for the later shipped Baytrail-machines.
The only way to get the Linux camera running the way described here is thus by modding the BIOS, so that requirement puts an enormous roadblock for getting support from anyone on this idea until the required BIOS mod is available and becomes such a quality that people dare to risk such a BIOS upgrade.

It is too old to use.