This is the improvement project for the MSFS default TBM 930.
And I suggest using the msfs-navsystems-performance for G3000 extra funcionalities and performance.
Current features of this modification are:
- Removed the 30% gap between 0 and 30% throttle:
tp_high_idle_throttle_pos = 0; (default = 30)
...so then I needed to ajust:
n1_to_shaft_torque_table = ... 68:0.12, 87:0.88 ...
- Ajusted autopilot maximum pitch:
max_pitch = 15 (default = 10)
- Corrected some numbers:
pitch_takeoff_ga = 10 (default = 8)
min_n1_for_starter_cutoff = 52 (default = 50)
min_n2_for_starter_cutoff = 80 (default = 200)
rated_shaft_hp = 850 (default = 0)
CG_aft_limit = 0.355 (default = 0.36)
rotation_speed_min = 80 (default = 90)
cruise_alt = 31000 (default = 30000)
best_glide = 120 (default = 0)
- Ajusted torque vs air density table:
density_on_torque_table = 0.0005:0.01, 0.0006:0.4, 0.0007:0.75, 0.000895:0.794, 0.001144:0.841, 0.001459:0.891, 0.001862:0.944, 0.002378:1.000
(Calculated using 5,6% decrease on torque every 21.63% decrease on density.)
(default = 0.0005:0.01, 0.0006:0.4, 0.0007:0.6, 0.0008:0.75, 0.0009:0.9,0.000975:1.0, 0.002378:1.000000)
- Landing gear creates more drag (by PositiveZero):
drag_coef_gear = 0.04700 (default = 0.01000)
- Decreased inertial separator effect in torque to 7/8 (now 22%, instead of 25%):
(L:XMLVAR_InertSep#ID#_Deployment) 14336 * (>K:ANTI_ICE_GRADUAL_SET_ENG#ID#) (default = 16384)
-
Added Uwa’s lighting fix v1.1
-
Transponder now starts on Stand by when started cold and dark
-
COM1, COM2 and ADF frequencies changed when started cold and dark
-
ITT is a big problem. If I increase it, it overheats on the ground, and if a decrease it, it stays too low on cruise level. Asobo's cfg is very limited. I decided to don't touch on ITT until the next patch comes;
-
Inertial Separator is working but not indicating as "ON" in the panel;
-
Still testing fuel consumption. If you enconter any problems, let me know.
For any other suggestions or bug reports, feel free to contact me:
My Discord: Guilherme Farias#9971
My forum profile: GuiFarias31
For liveries see this thread: https://forums.flightsimulator.com/t/turboprop-master-livery-list/168196/16
1: Click on the green button in the top right corner that says 'Code' and click "Download as ZIP"
2: Unzip and put the folder "aircraft-tbm930-improvement" in your MSFS Community folder
To uninstall just delete the folder "aircraft-tbm930-improvement" from your MSFS Community folder.
If you want to support me, here my PayPal donation link: http://bit.ly/PaypalFarias