junzis / pymodes Goto Github PK
View Code? Open in Web Editor NEWPython decoder for Mode S and ADS-B signals
License: GNU General Public License v3.0
Python decoder for Mode S and ADS-B signals
License: GNU General Public License v3.0
Issuing modeslive -h or modeslive --help should show the help text.
I downloaded pyModes-master on 2019-9-9 and installed it in-place and then encountered an exception.
The same error occurs if I use a traditional "pip install ." command instead of in-place installation.
I'm running off-the-shelf 64-bit ubuntu 19.04 (fully updated) on a Toshiba laptop, although I could reproduce the
the same issue on a similarly configured ubuntu 19.04 skylake desktop system.
I'm using an RTL-SDR v3 dongle, which is known-good and works well with a variety of applications.
After observing the failure, I checked the hardware with gqrx and all is well.
It's very likely I have some local configuration issue or have the dependencies wrong.
Thanks again for providing pyModeS. It looks promising.
mkdir run; pip install --target run .
Processing /home/dice/Downloads/pyModeS-master
Collecting argparse (from pyModeS==2.2)
Using cached https://files.pythonhosted.org/packages/f2/94/3af39d34be01a24a6e65433d19e107099374224905f1e0cc6bbe1fd22a2f/argparse-1.4.0-py2.py3-none-any.whl
Collecting numpy (from pyModeS==2.2)
Using cached https://files.pythonhosted.org/packages/d7/b1/3367ea1f372957f97a6752ec725b87886e12af1415216feec9067e31df70/numpy-1.16.5-cp27-cp27mu-manylinux1_x86_64.whl
Collecting pyrtlsdr (from pyModeS==2.2)
Using cached https://files.pythonhosted.org/packages/50/21/8c58fbe41f3b08e6a147e892156151430c30eb863f5e9e7ba12acb9b14a3/pyrtlsdr-0.2.91-py2.py3-none-any.whl
Collecting pyzmq (from pyModeS==2.2)
Using cached https://files.pythonhosted.org/packages/27/d7/d8aa6dde15f077f20efdf657367e26cbd2fcb96d182d0e690be9b3f2b76c/pyzmq-18.1.0-cp27-cp27mu-manylinux1_x86_64.whl
Building wheels for collected packages: pyModeS
Running setup.py bdist_wheel for pyModeS ... done
Stored in directory: /home/dice/.cache/pip/wheels/cf/6e/62/d368ad6d2ca558906f55d91c334075b9bf3afa4fd734431052
Successfully built pyModeS
Installing collected packages: argparse, numpy, pyrtlsdr, pyzmq, pyModeS
Successfully installed argparse-1.4.0 numpy-1.16.5 pyModeS-2.2 pyrtlsdr-0.2.91 pyzmq-18.1.0
append ./run and ./run/bin to PATH and PYTHONPATH
./run/bin/modeslive --source rtlsdr
The following is stderr/stdout :
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Exact sample rate is: 2000000.052982 Hz
Allocating 15 zero-copy buffers
File "_ctypes/callbacks.c", line 315, in 'calling callback function'
File "/home/dice/Downloads/pyModeS-master/run/rtlsdr/rtlsdr.py", line 628, in _bytes_converter_callback
self._callback_bytes(values, context)
File "/home/dice/Downloads/pyModeS-master/run/rtlsdr/rtlsdr.py", line 675, in _samples_converter_callback
self._callback_samples(iq, context)
File "/home/dice/Downloads/pyModeS-master/run/pyModeS/extra/rtlreader.py", line 131, in _read_callback
messages = self._process_buffer()
File "/home/dice/Downloads/pyModeS-master/run/pyModeS/extra/rtlreader.py", line 75, in _process_buffer
if self._check_msg(msghex):
File "/home/dice/Downloads/pyModeS-master/run/pyModeS/extra/rtlreader.py", line 101, in _check_msg
df = pms.df(msg)
File "/home/dice/Downloads/pyModeS-master/run/pyModeS/decoder/common.py", line 44, in df
msgbin = hex2bin(msg)
File "/home/dice/Downloads/pyModeS-master/run/pyModeS/decoder/common.py", line 8, in hex2bin
binstr = bin(int(hexstr, 16))[2:].zfill(int(num_of_bits))
ValueError: invalid literal for int() with base 16: '8DB5AEC399146B0A40080A1A45C2L'
On the odd chance that the trailing long "L" was causing the problem, I modified common.py to discard any
trailing non-hex characters. That inhibited the error, but I didn't see any aircraft, although running dump1090
a minute later showed over 60.
I also observed the following warnings after ctrl-c :
Traceback (most recent call last):
File "_ctypes/callbacks.c", line 315, in 'calling callback function'
File "/home/dice/Downloads/pyModeS-master/run/rtlsdr/rtlsdr.py", line 628, in _bytes_converter_callback
Process Process-3:
Exception KeyError: KeyError(140077307160384,) in <module 'threading' from '/usr/lib/python2.7/threading.pyc'> ignored
Segmentation fault (core dumped)
In rtlreader.py, the decoder decodes only data from a rtl, there is no way to pass raw iq data to it from outside, and whenever object of rtlreader is created, it is necessary to have a rtl device connected, as in the constructor RtlSdr() is called.
modeslive --source rtlsdr
Traceback (most recent call last):
File "/home/lal/.local/bin/modeslive", line 10, in
from pyModeS.streamer.decode import Decode
File "/home/lal/.local/lib/python2.7/site-packages/pyModeS/init.py", line 8, in
from . import py_common as common
File "/home/lal/.local/lib/python2.7/site-packages/pyModeS/py_common.py", line 7
def hex2bin(hexstr: str) -> str:
^
SyntaxError: invalid syntax
I am getting this while I try to run the "modeslive".
The function position(msg0, msg1, t0, t1) uses the following check:
if typecode(msg0) < 5 or typecode(msg0) > 18:
This should be:
if typecode(msg0) < 9 or typecode(msg0) > 18:
Either that, or the position function needs to support the decoding of the surface positions.
5 - 8 (inclusive) are Surface Position Messages
9 - 18 (inclusive) are Airborne Position Messages
The position decoder you have does not work for surface position messages as they need to be decoded differently and rely on either knowing the last position of the aircraft within 180NM or knowing the receiver location to work out which lat/long to use.
Also I saw some differences in output of _cprNL vs what I believe the lat->NL should be:
If lat is 0, then NL is 59
If abs(lat) = 87 then NL is 2
If abs(lat) > 87 then NL is 1
Hi, since 2.3, the pyzmq is not "extras" anymore, since pyModeS can't be imported without it:
>>> from pyModeS import *
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "blah\env\lib\site-packages\pyModeS\__init__.py", line 13, in <module>
from .extra import tcpclient
File "blah\env\lib\site-packages\pyModeS\extra\tcpclient.py", line 9, in <module>
import zmq
ModuleNotFoundError: No module named 'zmq'
It should probably be either moved to install_requires or the imports should be moved to function-level.
Thanks.
pyModeS 2.3 on Python 3.7.4, 64-bit, Windows.
Hello,
I recently encountered and aircraft transmitting TAS information in mb[25:35] with an all-zero mb[14:24]. TAS determination was blocked by this statement.
Would it be logical to move this statement to the subtype check beneath it?
pyModeS/pyModeS/decoder/bds/bds09.py
Line 38 in 89e67fa
Dear researcher:
Thanks for your job first. It's a great job for me to learn about ADS-B. After I read the guide book, I find all the time stamp seems like a local time. So I want to know whether ADS-B broadcast it's own clock in ADS-B frame. If so, how can I capture it.
I receive all the other ADS-B messages but not the squawk ones. Are commercial planes actually emiting them or maybe in emergency cases only?
Dear Junzis,
Very appreciate with pyModeS that could give me interesting use case as a noob on python.
I tried to run modeslive on windows environment but found error like this:
Traceback (most recent call last):
File "C:\Users*\AppData\Local\Programs\Python\Python39\Lib\site-packages\pyModeS\streamer\modeslive.py", line 140, in
screen_process.start()
File "C:\Users*\AppData\Local\Programs\Python\Python39\lib\multiprocessing\process.py", line 121, in start
self._popen = self._Popen(self)
File "C:\Users*\AppData\Local\Programs\Python\Python39\lib\multiprocessing\context.py", line 224, in _Popen
return _default_context.get_context().Process._Popen(process_obj)
File "C:\Users*\AppData\Local\Programs\Python\Python39\lib\multiprocessing\context.py", line 327, in _Popen
return Popen(process_obj)
File "C:\Users**\AppData\Local\Programs\Python\Python39\lib\multiprocessing\popen_spawn_win32.py", line 93, in init
reduction.dump(process_obj, to_child)
File "C:\Users\r**\AppData\Local\Programs\Python\Python39\lib\multiprocessing\reduction.py", line 60, in dump
ForkingPickler(file, protocol).dump(obj)
TypeError: cannot pickle '_curses.window' object
but otherwise on linux, the script can run well.
I've add pip install windows-curses but still can't work.
Is there any concern for windows environment?
calling modeslive --help gives the following erors
/usr/lib/python3/dist-packages/apport/report.py:13: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses
import fnmatch, glob, traceback, errno, sys, atexit, locale, imp
Traceback (most recent call last):
File "/usr/local/bin/modeslive", line 12, in
from pyModeS.streamer.source import NetSource,RtlSdrSource
File "/usr/local/lib/python3.6/dist-packages/pyModeS/streamer/source.py", line 3, in
from pyModeS.extra.rtlreader import RtlReader
File "/usr/local/lib/python3.6/dist-packages/pyModeS/extra/rtlreader.py", line 4, in
from rtlsdr import RtlSdr
File "/usr/local/lib/python3.6/dist-packages/rtlsdr/init.py", line 56, in
from .librtlsdr import librtlsdr
File "/usr/local/lib/python3.6/dist-packages/rtlsdr/librtlsdr.py", line 61, in
f = librtlsdr.rtlsdr_get_device_count
File "/usr/lib/python3.6/ctypes/init.py", line 361, in getattr
func = self.getitem(name)
File "/usr/lib/python3.6/ctypes/init.py", line 366, in getitem
func = self._FuncPtr((name_or_ordinal, self))
AttributeError: /usr/bin/python3: undefined symbol: rtlsdr_get_device_count
when I was decoding temperature in df20 and df21 I got wrong results. When I changed function "def temp44(msg, rev=False)", results was OK. see attached file for details.
Hi,
Thank you for the great job done so far. I am using Radarcape for one of my school projects and am tasked to extract some key information such as the squawk code and timestamp from the data received.
I have wrote afew lines of code:
client.txt
and printed the data acquried onto .txt for reference:
sample_output.txt
However, from the readings of your library and more documentations found online, I am clueless as to what to do next; so as to obtain the information in hexadecimal form (I pressume).
Any tips, or have I done something wrong?
Best regards.
I haven't tracked it all the way down, but I think pyModeS may be incorrectly decoding this position. At least the position it returns disagrees with the position returned by two other libraries.
import pyModeS as pms
msg_even = "8DA46D4F58B9834BD7AE086205AE"
msg_odd = "8DA46D4F5827864A548FA927F541"
print(pms.adsb.airborne_position(msg_odd, msg_even, 0, 1))
(88.94435, -57.63428)
The position I get from adsb and antirez dump1090 is this:
(88.91747426178496, 101.01104736328125)
Those two libraries use basically the same CPR NL function implementation, so maybe that's not a big surprise.
Note that those two messages are not actually valid for use in position decoding, because they were broadcast hours and many miles apart. But It still seems like there may be a potential issue.
When I ran modeslive --source rtlsdr
It results by IOError: Error code -1 when opening SDR (device index = 0)
Hi,
Does this parse out the hex data if it is already stored in say a .csv, or does it only parse it as the data comes in?
pyModeS/pyModeS/decoder/bds/bds09.py
Line 69 in 83e2289
Message 8DAE041599080000000000E25EA8
can cause an issue where the variable trk is referenced before assignment
Traceback
return airborne_velocity(msg, source)
File "/Library/Python/3.8/site-packages/pyModeS/decoder/bds/bds09.py", line 69, in airborne_velocity
trk_or_hdg = round(trk, 2)
UnboundLocalError: local variable 'trk' referenced before assignment```
pyModeS/pyModeS/decoder/adsb.py
Line 8 in 83e2289
altitude_diff
missing to provide the GNSS altitude (height above ellipsoid (HAE) WGS84) difference from the barometric altitude "alt" (which is standard pressure, and not even MSL).
Request enhancement to decode this value and present to live-modes streamer and display.
Also request enhancement to automatically calculate the HAE feet (GNSS altitude) from decoded altitude
(barometric)
pyModeS/pyModeS/decoder/adsb.py
Line 136 in 83e2289
The signature of the function adsb.position in the README file should change from pms.adsb.position(msg_odd, msg_even, t_odd, t_even) to pms.adsb.position(msg_even, msg_odd, t_even, t_odd). The 'even' arguments come first.
I was thinking of using this library to write some scripts for gain tweaking, but it looks like the library is ignoring signal strength info from Beast streams? :-(
In your pymodes documentation each message argument is noted as being 28 bytes. I thought that ADSB messages were 14 bytes long (112 bits)
Please explain. Thanks.
It would be great if pyModeS allowed to calculate surface positions using even/odd message pairs.
At the moment it is possible to calculate surface position with a known position of receiver or an airport. But it is not possible to use that position to verify the surface position (see reasonableness tests in ICAO document 9871), because known position has no time information and might be quite far away from the surface positions (i.e. a receiver more than 2.5 nautical miles from an airport or multiple airports, etc).
Being able to use even/odd message pairs to calculate surface positions, we can verify them using distance and time information as described in the document.
In the bds05.py:altitude
function
if tc < 19:
altcode = altbin[0:6] + "0" + altbin[6:]
else:
altcode = altbin[0:6] + "0" + altbin[6:]
Both lines are the same, so... duplicate or a bug?
I am totally new to python. I am trying to run the ADSB_Encode program. I resolved the first issue which appeared to be missing parentheses around a pair of print statements.
I am using the following on the latest Windows 10 build having used pip to load numpy:
Python 3.8.0 (tags/v3.8.0:fa919fd, Oct 14 2019, 19:21:23) [MSC v.1916 32 bit (Intel)] on win32
Type "help", "copyright", "credits" or "license" for more information.
I get the following error:
C:\ADSB-Out-master>ADSB_Encoder.py 0xABCDEF 12.34 56.78 9999.0
Traceback (most recent call last):
File "C:\ADSB-Out-master\ADSB_Encoder.py", line 419, in
(df17_even, df17_odd) = df17_pos_rep_encode(ca, icao, tc, ss, nicsb, alt, time, lat, lon, surface)
File "C:\ADSB-Out-master\ADSB_Encoder.py", line 273, in df17_pos_rep_encode
enc_alt = encode_alt_modes(alt, surface)
File "C:\ADSB-Out-master\ADSB_Encoder.py", line 38, in encode_alt_modes
tmp1 = (encalt & 0xff8) << 1
TypeError: unsupported operand type(s) for &: 'float' and 'int'
Any ideas as to what has happened?
Hello everyone,
First of all, my name is José Andrés and I am member of a robotics research group focused on UAVs. We are recently introducing our research on ADS-B for UTM utilities and this project fits perfect with our first requirements. So thank you so much for such a great job of code and manual book.
I am implementing NACp, NACv and SIL myself as well as version 2 for NIC. Here comes the point that nic_sup_b (NICs) is defined as a bit (40) part of the incoming msg whatever TC it is. In contrast, regarding to the book, NICs should be defined by bit 76 of TC=31 "operation and status messages". It is also the same definition for NICa in version 2.
Maybe I did misunderstand something.
By the way, I know it is a ten-minutes-issue, but I would share accuracy & integrity parameters implementation if you find it useful.
Thanks in advance for your help
Hello guys,
First of all, my name is Antonio and I'm developing a project in which we want to receive Mode-S MRAR (BDS 4,4), so when I discovered pyModeS I thought I had found the perfect solution.
I have downloaded it and, after reading the book and playing with the programme, two problems/doubts came up:
Thank you so much for your help.
Note: I'm using a SBS-3 receiver.
I get this error when trying to run the setup.py. Is there a way to fix this?
In the file bds05.py is the following description of the arguments:
'''
airborne_position(msg0, msg1, t0, t1):
# msg0 (string): even message (28 bytes hexadecimal string)
# msg1 (string): odd message (28 bytes hexadecimal string)
# t0 (int): timestamps for the even message
# t1 (int): timestamps for the odd message
'''
In the manual you are describing the following example:
'''
Example: Globally unambiguous position (decoding with two messages)
8D40621D58C382D690C8AC2863A7 (newest message, which is even)
8D40621D58C386435CC412692AD6 (older message, which is odd)
'''
So I would assume the params would be as follows:
msg0 = 8D40621D58C382D690C8AC2863A7 (newset & even)
msg1 = 8D40621D58C386435CC412692AD6 (older & odd)
t0 = 10 (or similar)
t1 = 20 (higher than t0)
The result is not matching the value stated in the manual....
But, if I use:
msg0 = 8D40621D58C382D690C8AC2863A7
msg1 = 8D40621D58C386435CC412692AD6
t0 = 20
t1 = 10
So I needed to exchange the timestamps to get the result from the example in the manual.
Therefore I would assume there might be a small mistake in the argument description?
I need to get Equipment Class(A1S,A1,A2,B1). Couldnt find any function supporting it
I found your work on ADS-B decoding and I found it very interesting.
I installed pyModeS-2.1 on my Pi3B+. Would you help me for next steps ?
I have a very little experience in the world of flight trucking.
I have a DVB-T + PI3B+, I run dump1090 and I launch h=localhost:8080.
That's basically what I know. I never used ModeSMixer neither PlanePlotter.
What should I do with pyModeS, how to launch it ? How can I display the A/C ?
should I install PlanePlotter on my PC?
I will be very grateful if you can help me.
When I receive ADS-B message from dump1090
I am converting it to binary form with binascii.unhexlify
. This is much more efficient to store than saving string version of messages.
To decode the messages, I am reading them from a database in binary form, convert to string using binascii.hexlify
and then use pyModeS
. But, internally, pyModeS
converts a message to binary form again (this or other way).
It would be great if pyModeS
API allowed to pass binary version of a message.
Taking a quick look at the API, it seems that single dispatch with separate type registration for str
and bytes
could do the trick?
Please consider the script below. Its output is as follows (columns are timestamp, typecode, oe flag and message)
2019-03-23 20:08:47.011677+00:00 11 1 8d4ca5415809670448d60d2fc835
2019-03-23 20:08:47.124150+00:00 19 1 8d4ca541990c9f02183c1e845693
2019-03-23 20:08:47.730598+00:00 29 0 8d4ca541ea05f9271b1c0891d457
2019-03-23 20:08:47.978328+00:00 11 0 8d4ca541580953cf23c531144f9b
message pair: (71.71367, 177.70279)
even message with ref: (53.71367, -1.18142)
odd message with ref: (53.41534, -6.16163)
I have received sequence of above messages. If I calculate the position using message pairs, then the position is far, far away from the airport near by I am getting the messages. When calculating the positions using reference location (Dublin airport) the result looks more plausible.
Is that normal?
The script
from dateutil.parser import isoparse
import pyModeS as pms
data = [
(isoparse('2019-03-23 20:08:47.011677+00'), '8d4ca5415809670448d60d2fc835'),
(isoparse('2019-03-23 20:08:47.124150+00'), '8d4ca541990c9f02183c1e845693'),
(isoparse('2019-03-23 20:08:47.730598+00'), '8d4ca541ea05f9271b1c0891d457'),
(isoparse('2019-03-23 20:08:47.978328+00'), '8d4ca541580953cf23c531144f9b'),
]
for ts, msg in data:
print(ts, pms.adsb.typecode(msg), pms.adsb.oe_flag(msg), msg)
ts_even, msg_even = data[-1]
ts_odd, msg_odd = data[0]
pos = pms.adsb.position(msg_even, msg_odd, ts_even, ts_odd)
print('message pair:', pos)
pos = pms.adsb.position_with_ref(msg_even, 53.421389, -6.27)
print('even message with ref:', pos)
pos = pms.adsb.position_with_ref(msg_odd, 53.421389, -6.27)
print('odd message with ref:', pos)
Hello,
First, thanks for the great documentation and decoder !
I saw there is not any online decoder for ADS-B / Mode-S messages, I think it would be great to make either a website or a REST API (flask ...) to decode already received messages !
Hello,
just a simple question:
"cprlat_even = util.bin2int(msgbin0[54:71]) / 131072.0"
is returning a value which is sometimes too small because bin2int is returning an 16 bit integer. CPR information is 17 bit and can't be returned as integer. In my opinion the return value must be a long value or is there something I do not understand?
Cheers Christian
The code is in cprNL
function is
if lat == 87 or lat == -87:
return 2
Considering that latitude is a float obtained using IEEE-754 standard, IMHO, it is highly unlikely we will hit -87/87 exactly (https://docs.python.org/3/tutorial/floatingpoint.html). Should math.isclose
be used here (https://docs.python.org/3/library/math.html#math.isclose)?
Hi,
I found out some problems with the position function. It gives me non continuous positions, sometimes jumping over several hundred km. I have a unit test reproducing the (possible) bug. It contains a set of real world ads-b messages. It seems to be coming from the calculation of the latitude index (j). At a certain moment, it goes from 7 to 8, and the tracks start jumping far from their actual position. When I force j=7, the result is correct.
from pyModeS import adsb
def test_adsb_icao():
# msg1 : odd msg
msg1 = "8D40093F5893F696E3FE74F04E96"
t1 = 1
# msg2 : even msg
msg2 = "8D40093F5897A3226409EFF5ACB6"
t2 = 2
# msg3 : even msg
msg3 = "8D40093F589B132BFC05D0C78026"
t3 = 3
pos = adsb.position(msg2, msg1, t2, t1)
assert pos == (46.70151, 8.95084)
pos = adsb.position(msg3, msg1, t3, t1)
# Found (52.75772, 10.11353), expected (46.7375, 8.9127)
assert pos == (46.7375, 8.9127)
Thanks.
I would really like to have BDS 3,0 implemented for decoding ACAS related operations.
I have copied the code to customize the streaming module shown in the README file but I get this error:
Traceback (most recent call last):
File "/usr/local/lib/python3.7/site-packages/pyModeS/extra/tcpclient.py", line 263, in run
received = [i for i in self.socket.recv(4096)]
File "zmq/backend/cython/socket.pyx", line 791, in zmq.backend.cython.socket.Socket.recv
File "zmq/backend/cython/socket.pyx", line 827, in zmq.backend.cython.socket.Socket.recv
File "zmq/backend/cython/socket.pyx", line 191, in zmq.backend.cython.socket._recv_copy
File "zmq/backend/cython/socket.pyx", line 186, in zmq.backend.cython.socket._recv_copy
File "zmq/backend/cython/checkrc.pxd", line 20, in zmq.backend.cython.checkrc._check_rc
zmq.error.Again: Resource temporarily unavailable
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/projectPath/main.py", line 33, in <module>
client.run()
File "/usr/local/lib/python3.7/site-packages/pyModeS/extra/tcpclient.py", line 287, in run
exception_queue.put(tb)
AttributeError: 'NoneType' object has no attribute 'put'
Hoping it was a python error I have launched modeslive --source rtlsdr
in terminal and I get this output befor exiting
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Exact sample rate is: 2000000.052982 Hz
I have used the module pyrtlsdr with no problem and I am able to use the dongle with Gqrx app
I've modified some files to add the heading and the velocity decoding on the surface with refference function. This could be done also on the surface position decoding, but I haven't done it yet.
velocity = util.DecodeMovement(util.bin2int(msgbin[37:44]))
heading=0
if msgbin[44] == '1':
heading = util.bin2int(msgbin[45:52]) / 128.0 * 360
On the utils file, this function needs also to be added:
def DecodeMovement(movement):
"""
Decodes velocity parameter on surface movement messages
"""
if (movement == 0): # no movmement information available
return None
elif (movement == 1): # aircraft stopped (G / S = 0 knots)
return 0
elif (movement == 2): # G / S < 0.125 kt
return 0.125
elif (movement >= 3 and movement <= 8):
return 0.125 + (movement - 3) * 0.1458333152116899
elif (movement >= 9 and movement <= 12):
return 1 + (movement - 9) * 0.25
elif (movement >= 13 and movement <= 38):
return 2 + (movement - 13) * 0.5
elif (movement >= 39 and movement <= 93):
return 15 + (movement - 39) * 1
elif (movement >= 94 and movement <= 108):
return 70 + (movement - 94) * 2
elif (movement >= 109 and movement <= 123):
return 100 + (movement - 109) * 5
elif (movement == 124): # max value!
return 175
elif (movement == 125): # reserved for aircraft decelerating
return None
elif (movement == 126): # reserved for aircraft accelerating
return None
elif (movement == 127): # reserved for aircraft backing up
return None
This is all great, you've done a really good job explaining how everything works.
I'm tasked with the job of creating an ADS-B Out for a school project. Any tips or advice for doing what you've done here in reverse?
Hello!
My Mode-S Beast can receive both Mode-S and Mode-A/C at the same time. The received data is sent to Planeplotter using the AVR formet. What I don't understand is how Planeplotter knows which squawk code that belongs to which aircraft. From what I can see by the raw output, the Mode-A/C message only contains the SSR code:
// 6-byte timestamp followed by SSR code
@01EA3CC23DBD0225;
@01EA3CC36A4B3420;
// 6-byte timestamp followed by short Mode-S message:
@01EA3CC42EF00261942AF05326;
@01EA3CC543CA0221;
@01EA3CC586996010;
// 6-byte timestamp followed by long Mode-S message:
@01EA3CC62FB08D4780BF5811D02937CA0CE8656C;
@01EA3CC652C35344;
@01EA3CC7BCE85357;
How can I extract which Mode-A/C-code an aircraft is transmitting? And shouldn't the A/C include the altitude as well?
Btw, I really love this project - keep up the good work! 👍
Best regards,
Even
The following messages have come from dump1090-fa
beast feed on localhost:30005
are clearly incorrect.
The options --modeac
and --no-crc-check
are not enabled.
8DA993F1588D03
8DAA703060A1E3
8DACDDBE5839D6
8DAA70306045F6
8DA6B1A3583BC6
These messages are decoded as DF-17 Airborne position messages.
short_msg = ['8DA993F1588D03', '8DAA703060A1E3', '8DACDDBE5839D6',\
'8DAA70306045F6', '8DA6B1A3583BC6']
# Check the downlink format on the messages
print(list(map(pyModeS.df, short_msg)))
# Check the DF-17 typecodes
print(list(map(pyModeS.adsb.typecode, short_msg)))
# Check CRC
print(list(map(pyModeS.crc, short_msg)))
outputs
[17, 17, 17, 17, 17]
[11, 12, 11, 12, 11]
[4234818, 3962231, 11421160, 3969378, 3049442]
This caused problems in my repository when the messages were sent to pyModeS.adsb.airborne_position()
or pyModeS.adsb.airborne_position_with_ref()
I currently see two possible solutions:
pyModeS.crc()
on each message, which is costly on a Raspberry Pilen(msg) == 28
for the DF-17 MessagesHas anyone else had similar experiences with dump1090
?
The following section mentions emitter category for aircraft category, i.e. heavy, large, glider
https://mode-s.org/decode/adsb/identification.html
Grepping through pyModeS
source code for emitter
or ec
yields nothing. Finally, I was able to find category
function.
IMHO, it would be great to mention the function in the above section.
BTW. Page 12 of the following document lists emitter categories
https://www.eurocontrol.int/sites/default/files/content/documents/nm/asterix/20140807-asterix-adsbm-part12-v2.2.pdf
Hi guys,
Do you plan to add methods for parsing Aircraft Operation Status messages?
http://mode-s.org/decode/adsb/advance/operation-status.html
I am mainly interested in ADS-B version number, NAC and SIL.
Thanks for your great work,
Michal
Just a quick note (in the open-source spirit) to anyone who may be interested; I have written an alternative client-side implementation with similar core modules that utilises multiprocessing in an attempt to multilat mode-AC messages as well. The source code can be found here: https://github.com/kelvinxuande/dso_internship_mlat-client. I would really appreciate any comments on it as well!
Several position functions require timestamps to be provided and the documentation says these have type int, but I cannot find instructions on how to correctly turn the time the message was received into an int.
Hi!
I was using an old version of pyModeS to make some tests. Recently I've updated to latest version, installation is ok, but I can't run anything, even modeslive. It's a bug in pyModeS or am I missing something?
I've setup python3 as default for my system.
pi@rasp3_dev:~ $ sudo pip3 install git+https://github.com/junzis/pyModeS
Collecting git+https://github.com/junzis/pyModeS
Cloning https://github.com/junzis/pyModeS to /tmp/pip-cm6ej86e-build
Requirement already satisfied (use --upgrade to upgrade): pyModeS==2.8 from git+https://github.com/junzis/pyModeS in /usr/local/lib/python3.5/dist-packages
Requirement already satisfied: numpy in /usr/local/lib/python3.5/dist-packages (from pyModeS==2.8)
Requirement already satisfied: pyrtlsdr in /usr/local/lib/python3.5/dist-packages (from pyModeS==2.8)
Requirement already satisfied: pyzmq in /usr/local/lib/python3.5/dist-packages (from pyModeS==2.8)
pi@rasp3_dev:~ $ sudo pip install pyModeS
Requirement already satisfied: pyModeS in /usr/local/lib/python3.5/dist-packages
Requirement already satisfied: numpy in /usr/local/lib/python3.5/dist-packages (from pyModeS)
Requirement already satisfied: pyrtlsdr in /usr/local/lib/python3.5/dist-packages (from pyModeS)
Requirement already satisfied: pyzmq in /usr/local/lib/python3.5/dist-packages (from pyModeS)
pi@rasp3_dev:~ $ modeslive --help
Traceback (most recent call last):
File "/home/pi/.local/lib/python3.5/site-packages/pyModeS/__init__.py", line 5, in <module>
from . import c_common as common
ImportError: cannot import name 'c_common'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/bin/modeslive", line 10, in <module>
from pyModeS.streamer.decode import Decode
File "/home/pi/.local/lib/python3.5/site-packages/pyModeS/__init__.py", line 8, in <module>
from . import py_common as common
File "/home/pi/.local/lib/python3.5/site-packages/pyModeS/py_common.py", line 130
addr: Optional[str]
^
SyntaxError: invalid syntax
pi@rasp3_dev:~/pyModeS $ python -V
Python 3.5.3
also, I'm trying to use this script, but got the same import error:
#!/usr/bin/python3 -O
import pyModeS as pms
import sys
for msg in sys.stdin:
msg = msg.replace("*", "").replace(";", "")
#if len(msg) > 20 and msg[0:4] == "A000" and pms.bds.bds44.is44(msg) and not pms.bds.bds40.is40(msg) :
if len(msg) > 20 and msg[0:4] == "A000" and pms.bds.bds44.is44(msg, rev=False) :
#print hex(pms.bin2int(pms.crc(msg, encode=False)))
print ("*" + msg.replace("\n","").lower() + ";")
#sys.stdout.write('Wind speed/dir: ')
print (pms.commb.wind44(msg, rev=False)) # Wind speed (kt) and direction (true) (deg)
#sys.stdout.write('Temp: ')
print (pms.commb.temp44(msg, rev=False)) # Static air temperature (C)
#sys.stdout.write('hPa: ')
print (pms.commb.p44(msg, rev=False)) # Average static pressure (hPa)
#sys.stdout.write('Hum: ')
print (pms.commb.hum44(msg, rev=False)) # Humidity (%)
print
In nuc_p
function in pyModeS/decoder/adsb.py
:
if tc in [20, 21]:
RCv = uncertainty.NA
But in the ICAO document, it says that vertical position error should be 4 and 15 for typecode 20 and 21, it seems?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.